ANTAIRA LNX-1802GN Manuel utilisateur
16-port 10/100TX + 2-port 10/100/1000T/Mini GBIC
L2 Managed Industrial Ethernet Switch with
Redundant Ring
User Manual
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the F CC rules. These limits
are designed to provide reasonable protection against harmful interference
in a r esidential i nstallation. This equipment g enerates, uses, and c an
radiate radio frequency energy. It may cause harmful interference to radio
communications if the eq uipment is not i nstalled and used i n a ccordance
with the instructions. However, there is no guarantee that interference will
not occur in a par ticular installation. If this equipment does cause harmful
interference t o r adio o r t elevision r eception, which c an be de termined b y
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may cause
radio i nterference in which case the us er may be r equired t o take ad equate
measures.
Content
Introduction ................................................................. I
Features .................................................................... I
Software Specifications ........................................... III
Package Contents .................................................... V
Hardware Description ............................................... 1
Physical Dimensions ................................................ 1
Front Panel .............................................................. 1
Top View .................................................................. 2
LED Indicators ......................................................... 3
RJ-45 Pin Assignments ............................................ 5
Cabling ..................................................................... 8
SFP Connection ....................................................... 9
Wiring the Power Inputs ......................................... 12
Wiring the Fault Alarm Contacts ............................ 13
Installation ................................................................ 14
DIN-Rail Mounting .................................................. 14
Wall Mounting ........................................................ 16
Installation Steps .................................................... 17
Console Management ............................................. 18
Connecting to the Console Port ............................. 18
Login in the Console Interface ............................... 19
CLI Management ................................................... 20
Commands Level ............................................................ 21
Commands Set List......................................................... 22
System Commands Set .................................................. 22
Port Commands Set ........................................................ 25
Trunk Commands Set ..................................................... 27
VLAN Commands Set ..................................................... 29
Spanning Tree Commands Set ....................................... 30
QOS Commands Set ...................................................... 33
IGMP Commands Set ..................................................... 34
Mac / Filter Table Commands Set ................................... 34
SNMP Commands Set .................................................... 35
Port Mirroring Commands Set ......................................... 38
802.1x Commands Set ................................................... 38
TFTP Commands Set ..................................................... 40
SystemLog, SMTP and Event Commands Set ................ 41
SNTP Commands Set ..................................................... 43
X-ring Commands Set ..................................................... 44
Web-Based Management ........................................ 46
About Web-based Management ............................ 46
Preparing for Web Management ............................ 46
System Login ......................................................... 47
System Information ................................................ 48
IP Configuration ..................................................... 48
DHCP Server – System configuration .................... 49
DHCP Server – Client Entries ................................ 51
DHCP Server - Port and IP Bindings ..................... 51
TFTP - Update Firmware ....................................... 52
TFTP – Restore Configuration ............................... 53
TFTP - Backup Configuration ................................ 53
System Event Log – Syslog Configuration ............. 54
System Event Log - SMTP Configuration .............. 55
System Event Log - Event Configuration ............... 56
Fault Relay Alarm .................................................. 59
SNTP Configuration ............................................... 59
IP Security .............................................................. 62
User Authentication ................................................ 63
Port Statistics ......................................................... 64
Port Control ............................................................ 65
Port Trunk .............................................................. 66
Aggregator setting .......................................................... 67
Aggregator Information ................................................... 68
State Activity ................................................................... 69
Port Mirroring ......................................................... 70
Rate Limiting .......................................................... 72
VLAN configuration ................................................ 74
VLAN configuration - Port-based VLAN .......................... 74
802.1Q VLAN .................................................................. 78
Rapid Spanning Tree ............................................. 82
RSTP - System Configuration ......................................... 82
RSTP - Port Configuration .............................................. 83
SNMP Configuration .............................................. 85
System Configuration ...................................................... 85
Trap Configuration .......................................................... 86
SNMPV3 Configuration ................................................... 87
QoS Configuration ................................................. 90
QoS Policy and Priority Type .......................................... 90
Port-based Priority .......................................................... 91
COS Configuration .......................................................... 92
TOS Configuration .......................................................... 92
IGMP Configuration ............................................... 93
X-Ring .................................................................... 94
Security .................................................................. 97
802.1X/Radius Configuration .......................................... 97
MAC Address Table ...................................................... 100
Factory Default ..................................................... 103
Save Configuration .............................................. 103
System Reboot .................................................... 104
Troubleshooting .................................................... 105
Technical Specifications ....................................... 106
I
Introduction
The managed industrial switch is a cost-effective solution and meets the high reliability
requirements d emanded by i ndustrial ap plications. Using fiber port c an ex tend t he
connection distance that increases the network elasticity and performance.
Features
System Interface/Performance
RJ-45 ports support Auto MDI/MDI-X Function
SFP (mini-GBIC) supports 100/1000 Dual Mode
Store-and-Forward Switching Architecture
Back-plane (Switching Fabric): 7.2Gbps
1Mbits Packet Buffer
8K MAC Address Table
Supports Wide Operating Temperature (-40oC ~ 75oC)
Case/Installation
IP-30 Protection
DIN-Rail and Wall Mount Design
Power Supply
Wide Range Redundant Power Design
Power Polarity Reverse Protect
Overload Current Protection
Spanning Tree
Supports IEEE 802.1d Spanning Tree
Supports IEEE 802.1w Rapid Spanning Tree
VLAN
Port Based VLAN
Support 802.1 Q Tag VLAN
GVRP
X-Ring
X-Ring, Dual Homing and Couple Ring Topology
II
Provide redundant backup feature and the recovery time below 20ms
Port Trunk with LACP
Support IEEE802.1ab LLDP
QoS (Quality of Service)
Support IEEE 802.1p Class of Service
Per port provides 4 priority queues
Port Base, Tag Base and Type of Service Priority
Bandwidth Control
Ingress Packet Filter and Egress Rate Limit
Broadcast/Multicast Packet Filter Control
Port Mirror: Monitor traffic in switched networks
TX Packet only
RX Packet only
Both of TX and RX Packet
System Event Log
System Log Server/Client
SMTP e-mail Alert
Relay Alarm Output System Events
Security
Port Security : MAC address entries/filter
IP Security: IP address security management to prevent unauthorized intruder
Login Security: IEEE802.1X/RADIUS
SNMP Trap
Device cold start, Power status
Authentication failure
X-Ring topology change
Port Link up/Link down
IGMP with Query mode for Multi Media Application
TFTP Firmware Update and System Configure Restore and Backup
Electrostatic Discharge test (ESD, IEC 61000-4-2)
Air Discharge: 8KV
Contact Discharge: 6KV
III
Software Specifications
Management
SNMP v1, v2c and v3 management
Web interface management
Telnet interface management
Command Line Interface (CLI) management
SNMP MIB
RFC 1215 Trap
RFC 1213 MIBII
RFC 1157 SNMP MIB
RFC 1493 Bridge MIB
RFC 2674 VLAN MIB
RFC 1643
RFC 1757
RSTP MIB
Private MIB
VLAN
Port based VLAN
IEEE802.1Q Tag VLAN (256 entries)/VLAN ID (up to 4k in
number which can be assigned from 1 to 4096)
GVRP (256 groups)
Port Trunk with
LACP
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk
members
LLDP
Supports LLDP that allows the switch to advertise its
identity and capabilities on the LAN
Spanning Tree
IEEE802.1d spanning tree
IEEE802.1w rapid spanning tree.
X-Ring
Supports X-Ring, Dual Homing and Couple Ring
Provides redundant backup feature an
d the recovery time
below 20ms
Quality of Service
The quality of service determined by port, Tag and IPv4
Type of Service, IPv4 Different Service
Class of Service
Supports IEEE 802.1p class of service, per port provides
4 priority queues
IV
Port Security
Supports 100 entries of MAC address for static MAC and
another 100 for MAC filter
Port Mirroring
TX packet only
RX packet only,
Both of TX and RX packets
IGMP
Supports IGMP snooping v1, v2 and v3
Up to 256 multicast groups and IGMP query
IP Security
Supports 10 IP addresses that have permission to access
the switch management and to prevent unauthorized
intruder
Login Security Supports IEEE-802.1X Authentication/RADIUS
Bandwidth
Control
Supports ingress packet filter and egress packet limit
The egress rate control supports all of packet type and
the limit rates are 100K ~ 250Mbps
Ingress filter packet type combination rules are
Broadcast/Multicast/Unknown Unicast packet,
Broadcast/Multicast, Broadcast packet only and all of
packets
The packet filter rate can be set from 100k to 250Mbps
Flow Control
Supports Flow Control for Full-duplex and Back Pressure
for Half-duplex
System Log
Supports System log record and remote system log
server
SMTP
Supports SMTP Server and 6 e-mail accounts for
receiving event alert
SNMP Trap
Up to 3 Trap stations
Cold start, Port link up, Port link down, Authentication
Failure, Private Trap for power status, Power Alarm
configuration, Fault Alarm, X-Ring topology change
DHCP Provides DHCP Client/DHCP Server function
DNS Provides DNS client feature
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ANTAIRA Changer
ANTAIRA
ANTAIRA LNP-1802G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LNP-0602 Series Manuel utilisateur
ANTAIRA
ANTAIRA LNX-1802G Manuel utilisateur
ANTAIRA
ANTAIRA LMX-0600 Series Manuel utilisateur
ANTAIRA
ANTAIRA LNP-2602G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LNX-C501G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LNP-1002G-SFP-24 Series Manuel utilisateur
ANTAIRA
ANTAIRA LMX-3228G-10G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LMX-1802G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA Lanolinx LNX-1002GN Manuel utilisateur
ANTAIRA
ANTAIRA LNP-0702G-SFP-24 Series Manuel utilisateur
ANTAIRA
ANTAIRA LMP-0800G Series Manuel utilisateur
ANTAIRA
ANTAIRA LNX-1604G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LMX-1002G-10G-SFP Manuel utilisateur
ANTAIRA
ANTAIRA LNX-1600 Series Manuel utilisateur
ANTAIRA
ANTAIRA LNX-1604G-SFP Series Manuel utilisateur
ANTAIRA
ANTAIRA LMP-1202M-SFP-24 Series Manuel utilisateur
ANTAIRA
ANTAIRA LNX-C800 Series Manuel utilisateur
ANTAIRA
ANTAIRA LMX-C602G-SFP-T-V2 Manuel utilisateur
ANTAIRA
ANTAIRA LNX-800AG-E Series Manuel utilisateur
