ANTAIRA ARX-7234-AC-PD-T Manuel utilisateur

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

ARX-7234-AC-PD-T

Industrial Outdoor IP67 IEEE 802.11a/b/g/n/ac Dual Radio

Wireless AP/Client/Bridge/Repeater with PoE PD

Version 1.0

(October 2018)

User Manual

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC., Microsoft Windows and the Windows logo are

the trademarks of Microsoft Corp. All other brand and product names are trademarks or registered trademarks of

their respective owners.

Disclaimer

Antaira Technologies, LLC. provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC. may make improvements and/or changes to the product and/or specifications of the product described in

this manual, without prior notice. Antaira Technologies, LLC. will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

iii

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Wireless APs

User Manual

This manual supports the following models:

•ARX-7234-AC-PD-T

•ARX-7234-AC-PD-T-EU (EU version)

•ARX-7234-AC-PD-T-JP (Japan version)

Please check our website (www.antaira.com) for any updated manual or contact us by e-mail

(support@antaira.com).

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

Table of Contents

1. Overview ............................................................... 1

1.1 Key Features.................................................. 1

1.2 Package Contents.......................................... 1

1.3 Safety Precaution........................................... 1

2. Hardware Description.......................................... 3

2.1 Physical Dimensions...................................... 3

2.2 Front Panel ........................................................ 4

2.3 Ethernet Ports.................................................... 5

2.4 Cabling............................................................... 5

3. Mounting Installation........................................... 6

4. Hardware Installation.................................................. 7

4.1 Installation Steps................................................ 7

4.2 Maintenance and Service .................................. 7

5. Access with Web Browser ......................................... 8

5.1

Web GUI Login...................................................... 8

5.2

Network Deployment Modes............................... 9

5.2.1

Network Deployment (AP)......................... 10

5.2.1

Network Deployment (2.4GHz WIFI)......... 13

5.2.1

Gateway Deployment (5GHz WIFI)........... 15

5.3

System................................................................. 15

5.3.1

System ...................................................... 15

5.3.2

Administration............................................ 17

5.3.3

Backup / Flash Firmware........................... 18

5.3.4

Reboot....................................................... 20

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

iii

5.3.5

Diagnostics................................................ 20

5.3.6

USB Disk Operation .................................. 21

5.4

Security............................................................... 22

5.4.1

Remote Management................................ 22

5.4.2

DMZ........................................................... 23

5.4.3

Port Forwarding......................................... 24

5.4.4

MAC Filter ................................................. 25

5.4.5

PPTP/L2TP ............................................... 26

5.4.6

IPSec......................................................... 27

5.5

Services .............................................................. 32

5.6.5

Dynamic DNS............................................ 32

5.6.6

Syslog........................................................ 34

5.6

Network............................................................... 34

5.6.1

WIFI Status................................................ 34

5.6.2

WIFI Configuration .................................... 35

5.6.3

Static Routes............................................. 40

5.7

Switch.................................................................. 41

6. Trouble Shooting ...................................................... 45

7. Technical Specifications.......................................... 45

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

1.Overview

Antaira Technologies’ ARX-7234-AC-PD-T is designed for industrial and enterprise outdoor wireless

access applications. Embedded with the Qualcomm IPQ4029 Quad-Core chipset, it boasts network

robustness, stability and wider network coverage. Based on IEEE 802.11a/b/g/n/ac, the access point

supports high-speed data transmission of up to 867Mbps.

The ARX-7234-AC-PD-T is capable of operating in different modes, which makes it suitable for a wide

variety of wireless applications, including long-distance deployments. The unit also allows the user to

position the wireless antenna in a better signal-broadcasting location for improved wireless coverage and

signal strength or simply in a more convenient location.

1.1 Key Features

System Interface/Performance

•Quad-core ARM A7 716MHz

•WAN 1*10/100/1000Tx

•LAN 1*10/100/1000Tx

•WLAN supports concurrent 2.4G/5GHz Wi-Fi

Power Input

•PoE PD: 48-56VDC

Operating Temperature

•Extended operating temperature: -40°C ~ 70°C

Case/Installation

•Aluminum with IP-67 protection

•Installation in a Pollution Degree 2 industrial environment

•Pole and Wall mount design

1.2 Package Contents

•1 - Quick Installation Guide

•1 - ARX-7234-AC-PD-T

•1 – Pole/Wall mounting bracket set with screws

1.3 Safety Precaution

Attention

If the DC voltage is supplied by an external circuit, please use a protection device on

the power supply input. Supply by UL Listed industrial use power. The industrial

Wireless AP’s hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

Warning Labels

The caution label means that you should check the certain information on user manual

when working with the device. (Shown in Figure 1)

Figure 1: Caution Label

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of ARX-7234-AC-PD-T

(W x H x D) is 269mm x 81mm x 239mm

Figure 2.1

Physical Dimensions

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

2.2 Front Panel

The front panel of the ARX-7234-AC-PD-T can be seen below (Figure 2.2).

Figure 2.2

Front Panel

WAN Port

LAN Port

(Power: 48V

PoE+)

Antenna 1

Antenna 2

Antaira Technologies - Industrial Wireless AP

ARX-7234-AC-PD-T User Manual V1.0

2.3 Ethernet Ports

RJ-45 Ports

RJ-45 Ports (Auto MDI/MDIX): The RJ-45 port is auto-sensing for 10/100Base-Tx or 1000Base-

Tx device connections. Auto MDI/MDIX means that the wireless AP can connect to another switch

or workstation without changing the straight-through or crossover cabling. See the figures shown

below for the straight-through and crossover cabling schematics.

Figure 2.3: RJ-45 Ethernet Port Pin

2.4 Cabling

Twisted-pair segments can be connected with an Unshielded Twisted Pair (UTP) or Shielded

Twisted Pair (STP) cable. The cable between the equipment and the link partner (wireless AP,

switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.

Figure 2.4 Figure 2.5

Straight-Through Cables Schematic Crossover Cables Schematic

Table des matières

Autres manuels ANTAIRA Routeur réseau

ANTAIRA

ANTAIRA LNX-501AG-SFP-T Manuel utilisateur

ANTAIRA

ANTAIRA STE-6104C-T-V2 Manuel utilisateur

ANTAIRA

ANTAIRA LNX-0802C-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-0500 Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-800AG Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0601G-SFP-V2 Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-0500G-BT Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-1202G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA ARS-7235-AC Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-0800G Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-1600G-M12-67-110 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0702G-SFP-bt-24-V2 Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-0601G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-1604G-SFP Series Manuel d'installation et d'exploitation

ANTAIRA

ANTAIRA LNX-1600G Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0702G-SFP-V2 Series Manuel utilisateur

ANTAIRA

ANTAIRA ARS-7235-5E-AC Series Manuel utilisateur

ANTAIRA

ANTAIRA LMX-2004G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LMP-1202M-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNP-2804GN-SFP-T Manuel utilisateur

ANTAIRA

ANTAIRA LMP-1202G-SFP Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-500A Manuel utilisateur

ANTAIRA

ANTAIRA LMP-0602 24-V2 Series Manuel utilisateur

ANTAIRA

ANTAIRA LNX-802AG-S10-T Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité