ANISOPRINT COMPOSER A4 Manuel utilisateur
USER MANUAL
COMPOSER A4
COMPOSER A3
TABLE OF CONTENTS
DISCLAIMER 2
SAFETY INSTRUCTIONS 3
COMPLIANCE STATEMENT 5
OVERVIEW 7
BASIC SPECIFICATIONS 7
DELIVERY PACKAGE 8
COMPOSER OPERATIONS 9
MAIN SCREEN 9
INSTALLATION 13
LOADING MATERIALS 13
BUILDPLATE CALIBRATION 13
NETWORK BRIDGE SOFTWARE UPDATING 20
MAINTENANCE 21
PLASTIC NOZZLE REPLACEMENT 21
PLASTIC NOZZLE CLEANING 22
PRINTING MATERIALS 25
PLASTICS 25
SOFTWARE 27
INTERFACE 27
SYSTEM REQUIREMENTS 30
DISCLAMER
This User Manual is the main document for Composer CFC printers, it is provided with the delivery package. The Manual guides
correct operation, maintenance, and troubleshooting of Composer CFC printers manufactured by Anisoprint.
Please follow this User Manual when operating and maintaining the equipment. Failure to follow the guidelines may lead to poor
quality of printed parts, damage to the printer, or cause injury, please read the User Manual carefully.
2anisoprint.comv1.9
SAFETY INSTRUCTIONS
ELECTROMAGNETIC COMPATIBILITY
class A device, which means it can cause additional electromagnetic interference when used at home.
GENERAL PRECAUTIONS
Carefully study all precautions before using the printer. When in operation the user should follow all operation precautions for
electrical equipment.
An explanatory note to graphic symbols:
Basic precautions:
WARNING
RESULT IN SERIOUS INJURY OR FATAL OUTCOME.
CAUTION
RESULT IN MINOR OR MODERATE INJURY.
NOTE
WARNING:
WARNING:
WARNING:
CAUTION:
CAUTION: AVOID PENETRATION OF WATER IN ELECTRONIC COMPONENTS OF
CAUTION:
MAINTENANCE.
CAUTION:
CAUTION:
CAUTION:
AREAS.
NOTE:
NOTE:
NOTE:
NOTE:
MATERIALS ARE REMOVED.
NOTE:
3anisoprint.com
v1.9
PRECAUTIONS WHEN WORKING WITH CARBON FIBER
I
cause splinters.
sure to wear safety glasses and protecting mask.
WARNING SYMBOLS
For reasons of safety the following symbols can be found on the printer case.
WARNING:
AND LABORATORY POWER SUPPLY SOURCES IN ORDER TO AVOID IGNITION
OF CARBON FIBER. CARBON FIBER IS A GOOD ELECTRICAL CONDUCTOR.
WARNING:
AND MAY CAUSE SKIN BURNS
PLACES OF GROUNDING CONNECTIONS
WARNING:
anisoprint.comv1.9
COMPLIANCE STATEMENT
provided the product is not used for anything other than the intended purpose according to the rules and recommendations described
in this User Manual.
NOTE:
CAUTION:
equipment and devices. This equipment must be disposed of in accordance with the applicable local
waste and safety regulations. To ensure safety when disposing the equipment it is necessary to follow
generally accepted practices for safe operation when disposing of equipment and devices.
5anisoprint.com
v1.9
COMPOSITE FIBER COEXTRUSION
is for plastic. The CF goes through central channel and is coated by molten plastics supplied through the lateral channel into the heat
plastics.
The technology allows to use various plastics with processing temperatures up to 270°C. You can use ABS, PLA, PETG, PA, and PC
plastics. The material can be varied to achieve the best operational or economic parameters of the parts depending on the goals.
anisoprint.comv1.9
OVERVIEW
BASIC SPECIFICATIONS
chamber.
provided the product is not used for anything other than the intended purpose according to the rules and recommendations described
in this User Manual.
4 3
Printing technology
P 29 9
Layer thickness, min.
Print head
ter 0.
Print speed for FFF 10 mmsec – 80 mmsec
Print speed for CFC 1 mmsec – 10 mmsec
ter 1.75 mm
Compatible plastics Plastics with processing temperatures up to 27
Reinf Anisoprint CCF
Buildplate surface Glass
TEMPERATURE
Print head operating
temperature, max. 27
Buildplate operating
temperature, max. t
Ambient operating
temperatures
SOFTWARE
Slicer Anisoprint Aura
OS support Windows 7 and later
POWER REQUIREMENTS
Voltage
Frequency 50
Maximum consumption 800 W 1000 W
INTERFACE
LCD 3.5'' touchscreen .3'' touchscreen
Input
PHYSICAL CHARACTERISTICS
Print
Net weight
P
Gross weight
7anisoprint.com
v1.9
DELIVERY PACKAGE
Items in the package:
1. Composer CFC Printer– 1 pc.
2. Plastic filament spool – 2 pc.
3. Anisoprint CCF-1.5k fiber spool – 1 pc.
4. Tool kit – 1 pc.
5. Personal protective equipment kit– 1 pc.
6. Spare parts kit– 1 pc.
7. Memory card SD – 1 pc.
8. User Manual
8anisoprint.comv1.9
Autres manuels pour COMPOSER A4
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ANISOPRINT Imprimante 3D
