Analog Devices ADZS-BF707-BLIP2 Guide de l'utilisateur
Copyright Information
©2015 Analog Devices, Inc., ALL RIGHTS RESERVED. This document
may not be reproduced in any form without prior, express written consent
from Analog Devices, Inc.
Printed in the USA.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by impli-
cation or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, CrossCore, and EngineerZone are reg-
istered trademarks of Analog Devices, Inc.
Blackfin+ is a trademark of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Downloaded from Arrow.com.Downloaded from Arrow.com.
Regulatory Compliance
The ADZS-BF707-BLIP2 board is designed to be used solely in a labora-
tory environment. The board is not intended for use as a consumer end
product or as a portion of a consumer end product. The board is an open
system design which does not include a shielded enclosure and therefore
may cause interference to other electrical devices in close proximity. This
board should not be used in or near any medical equipment or RF devices.
The ADZS-BF707-BLIP2 board is in the process of being certified to
comply with the essential requirements of the European EMC directive
2004/108/EC and therefore carries the “CE” mark.
The BLIP2 board evaluation system contains ESD (electrostatic discharge)
sensitive devices. Electrostatic charges readily accumulate on the human
body and equipment and can discharge without detection. Permanent dam-
age may occur on devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation or loss of
functionality. Store unused BLIP2 boards in the protective shipping pack-
age.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
ADZS-BF707-BLIP2 Board Evaluation System Manual v
CONTENTS
PREFACE
Product Overview ............................................................................ x
Purpose of This Manual ................................................................. xii
Intended Audience ......................................................................... xii
Manual Contents .......................................................................... xiii
What’s New in This Manual .......................................................... xiii
Technical Support .......................................................................... xiv
Supported Processors ...................................................................... xiv
Supported Tools .............................................................................. xv
Product Information ....................................................................... xv
Analog Devices Web Site ........................................................... xv
EngineerZone ........................................................................... xvi
Notation Conventions .................................................................... xvi
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Contents
vi ADZS-BF707-BLIP2 Board Evaluation System Manual
USING ADZS-BF707-BLIP2 BOARD
Package Contents ......................................................................... 1-2
Default Configuration .................................................................. 1-2
BLIP2 Board Installation .............................................................. 1-3
BLIP2 Board Session Startup ........................................................ 1-4
Evaluation License ........................................................................ 1-6
Mobile DDR Memory .................................................................. 1-7
SPI Flash ...................................................................................... 1-8
UART1 Interface .......................................................................... 1-8
USB Interface ............................................................................... 1-8
SD Interface ................................................................................. 1-9
Debug Interface ............................................................................ 1-9
Power-On-Self Test ....................................................................... 1-9
RF Wireless Interface .................................................................... 1-9
Power Architecture ..................................................................... 1-10
Example Programs ...................................................................... 1-10
Reference Design Information ..................................................... 1-11
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
ADZS-BF707-BLIP2 Board Evaluation System Manual vii
Contents
ADZS-BF707-BLIP2 BOARD HARDWARE REFERENCE
System Architecture ...................................................................... 2-2
Push Buttons ................................................................................ 2-4
GPIO Push Buttons (SW1 and SW2) ....................................... 2-5
Reset Push Button (SW3) ........................................................ 2-5
WAKE IO Push Button (SW4) ................................................ 2-5
LEDs ............................................................................................ 2-6
GPIO Status LED (LED1) ...................................................... 2-7
SYS_FAULT LED (LED4) ....................................................... 2-7
Connectors ................................................................................... 2-8
JTAG/SWD/SWO Connector (P3) ........................................ 2-10
USB Connector (P4) ............................................................. 2-10
USB to UART Connector (P8) .............................................. 2-10
Power Connector (P5) ........................................................... 2-11
RF Wireless Connector (J2) ................................................... 2-11
SD Connector (J3) ................................................................ 2-11
ADZS-BF707-BLIP2 BOARD BILL OF MATERIALS
ADZS-BF707-BLIP2 BOARD SCHEMATIC
INDEX
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
ADZS-BF707-BLIP2 Board Evaluation System Manual ix
PREFACE
Thank you for purchasing the ADZS-BF707-BLIP2 board, Analog
Devices, Inc. low-cost evaluation system for the ADSP-BF70x family of
Blackfin®processors.
The ADSP-BF707 processor is a member of the Blackfin family of prod-
ucts. Blackfin processors combine a dual-MAC state-of-the-art signal
processing engine, the advantages of a clean, orthogonal RISC-like micro-
processor instruction set, and single-instruction, multiple-data (SIMD)
multimedia capabilities into a single instruction-set architecture. New
enhancements to the Blackfin+™ core add 32-bit MAC and 16-bit com-
plex MAC support, cache enhancements, branch prediction and other
instruction set improvements, all while maintaining instruction set com-
patibility to previous Blackfin products.
The ADZS-BF707-BLIP2 board is shipped with all of the necessary hard-
ware—you can start the evaluation immediately. The package contains the
standalone evaluation board, CE-approved power supply, and USB cable.
The BLIP2 board ships with an ICE-1000 emulator.
A RF Wireless connector is provided for connecting the BLIP2 board to
an Analog Devices Wireless Sensor Network (WSN) cluster board
(EV-ADRN-WSN-2Z).
The on-board mechanical switches are push buttons.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Product Overview
x ADZS-BF707-BLIP2 Board Evaluation System Manual
The evaluation board is designed to be used in conjunction with the
CrossCore®Embedded Studio (CCES) development tools to test capabil-
ities of the ADSP-BF70x processors. The development environment aids
advanced application code development and debug, such as:
• Create, compile, assemble, and link application programs written
in C++, C, and assembly
• Load, run, step, halt, and set breakpoints in application programs
• Read and write data and program memory
• Read and write core and peripheral registers
Product Overview
The board features:
• Analog Devices ADSP-BF707 processor
• 184-ball BGA package
• 24 MHz crystal oscillator for processor
• 24 MHz crystal oscillator for USB
• Mobile DDR memory (DMC0) chip
• 32M bit x 16 x 4 banks (2G bit)
• MT46H128M16LFDD-48WT
• Quad SPI Flash (SPI2)
• 32M bit serial flash memory
• Windbond W25Q32
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Autres manuels pour ADZS-BF707-BLIP2
1
Table des matières
Autres manuels Analog Devices Carte mère
Analog Devices
Analog Devices EVAL-LTC9101-3 Manuel utilisateur
Analog Devices
Analog Devices DC2569A Guide de configuration rapide
Analog Devices
Analog Devices Linear DC2681A-A Guide de configuration rapide
Analog Devices
Analog Devices EVAL–ADM2486EBZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD5761RSDZ Manuel utilisateur
Analog Devices
Analog Devices UG-012 Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD7606C16FMCZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-LTC3313EV-A-Z Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD5592RSDZ Manuel utilisateur
Analog Devices
Analog Devices UG-442 Manuel utilisateur
Analog Devices
Analog Devices EV-ADF5904SD2Z Manuel utilisateur
Analog Devices
Analog Devices EVAL-ADAQ4001FMCZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-ADAQ4001 Manuel utilisateur
Analog Devices
Analog Devices EVAL-ADuMQSEBZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD7177-2SDZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD7176-2SZD Manuel utilisateur
Analog Devices
Analog Devices ADSP-BF518F EZ-Board Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD5161DBZ Manuel utilisateur
Analog Devices
Analog Devices EVAL-AD5675SDZ Manuel utilisateur
Analog Devices
Analog Devices AD9550 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
