AMT Datasouth 7200 Manuel utilisateur

ATB Printer

User's Guide

7200

Part No. 111017 Rev. D

Operation Manual

7200

Introduction.............................................................. i

1. Before Using the ATB Printer ......................... 1-1

1.1 Checking the Package ....................................................... 1-2

1.2 Names and Functions ........................................................ 1-3

2. Operation.......................................................... 2-1

2.1 Connecting the ATB Printer.............................................. 2-2

2.2 Turning the Power On and Off .......................................... 2-4

2.3 Loading the Documents .................................................... 2-5

2.4 Setting Documents in BIN 3 ............................................. 2-9

2.5 Loading Documents into the Inserter .............................. 2-13

2.6 Installing the Transfer Ribbon (TT Only) ....................... 2-14

2.7 Changing Transfer Ribbons (TT Only) ........................... 2-18

3. Daily Maintenance ........................................... 3-1

3.1 Cleaning the ATB Printer.................................................. 3-2

3.1.1 Cleaning the Printer Surface ................................. 3-2

3.1.2 Cleaning the Magnetic Head................................. 3-3

3.1.3 Cleaning the Thermal Head .................................. 3-5

3.1.4 Cleaning a Platen Roller ....................................... 3-6

3.1.5 Cleaning a Carrier Roller ...................................... 3-7

3.1.6 Removing Paper Dust ........................................... 3-9

4. Troubleshooting .............................................. 4-1

4.1 Paper Jam .......................................................................... 4-2

4.2 Error Messages ................................................................ 4-12

Appendix 1: Specifications ........................................ A-1

Appendix 2: Consumables ......................................... A-5

Table of

Contents...

Operation Manual

7200

(Page is intentionally blank)

Operation Manual i

7200

INTRODUCTION

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

Operation Manualii

7200

Product Safety

This manual uses a variety of terms and symbols to ensure the safe operation of the product,

help prevent hazards to yourself and others, and help prevent property damage. The

following

describes terms, symbols, and meanings used in this manual. Before reading this manual,

please familiarize yourself with the terms and symbols below.

WARNING Ignoring this cautionary note and handling the product

improperly may result in death or serious injury.

Ignoring this warning and handling the product improperly

may result in injury or physical property damage.

CAUTION

The triangle indicates the presence of danger. Specific details

of the danger are described in the triangle. (The symbol on the

right indicates danger of electric shock.)

This symbol indicates a prohibited action. Specific details of

the prohibition are described in or near the symbol. (The

symbol on the right indicates the item should not be

disassembled.)

This symbol indicates a mandatory action. Specific details of

the action are described in the symbol. (The symbol on the

right indicates that the power cable must be unplugged.)

Terms

Symbols

Operation Manual iii

7200

INTRODUCTION

Safety Considerations

READ THIS PAGE BEFORE INSTALLING OR USING THIS PRODUCT!

nDo not remove the cover or attempt any repairs on this product. There is risk

of electric shock.

nDo not place heavy materials on the power cable. Do not bend or twist the power cable.

The cable may get damaged, causing fire or electric shock.

nDo not use damaged cables or broken connector or power plugs. There is risk

of fire or electric shock.

nUse only power voltages specified for this product. Improper voltages create a risk of

fire or electric shock.

nSecurely plug the power cable into a power receptacle. Metal objects touching the

power plug may cause fire, electric shock, or equipment malfunction.

nHold the plug when unplugging the power cable. Do not pull on the power cable itself,

or the cable may become damaged and cause fire or electric shock.

nBe careful not to drop anything into any opening of the product. Never push anything

into the openings. There is risk of fire or electric shock.

nIn the event of any abnormality (such as smoke or odors), unplug the power

cable immediately. There is risk of fire or electric shock.

nDo not install the product where water splashes are likely or in areas of high humidity.

There is risk of fire or electric shock.

nDo not place drink or liquid containers or small metal objects on the product. These

items may cause fire or electric shock if they spill or fall inside. Immediately unplug

the power cable if liquids or metal objects are spilled on the product.

nDo not use isopropyl alcohol around open flames or heat sources. Alcohol is highly

flammable and creates a risk of fire or explosion.

nBe careful when opening or closing covers. Do not take your hands off covers when opening

or closing them. Falling covers may cause injury.

nBe careful when opening, closing, or moving covers. Take care not to hit your face, head, or

hands with the open cover. You may be injured.

nDo not block the air ventilation holes of the product. Blocking the vents accumulates heat

inside the cabinet and can lead to product failure, heat, or fire damage.

nDo not install the product on an unstable or inclined surface. The product may fall and cause

damage or injury.

WARNING

CAUTION

Operation Manualiv

7200

Caution Label

This product comes with a caution label attached as described below.

CAUTION

Caution Label

Falling covers may

cause injury.

Do not take your

hands off covers

when opening and/

or closing them.

Operating Environment

Location

•Do not place the product in direct sunlight or near heating sources such as stoves or

heaters.

•Do not place the product in a dusty or humid environment.

•Do not place the product under strong shock or vibration.

•Do not place the product in a strong magnetic or radio field, or near a television set or

radio.

•Make sure that the vents are not blocked. Make sure that the installation location is well

ventilated and that air can freely circulate around the product.

•Do not place the product where contact with chemicals is likely.

Operation Manual v

7200

INTRODUCTION

Left Right

Front

Top

Back

inches (millimeters)

9.8 in (250mm)

15 in (380mm) 9.8 in (250mm) 5.9 in (150mm)

Space Required

9.8 in (250mm) 8.3 in

(210mm)

21.6 in (550mm)

9.8 in (250mm)

9.8 in (250mm) 9.8 in (250mm)

8.3 in

(210mm)

Operation Manualvi

7200

Temperature and Humidity

Make sure that the following temperature and humidity conditions are met :

•Ambient temperature: 41 to 104 degrees F (5 to 40 degrees C)

•Ambient humidity: 20% to 90% RH (relative humidity) — no condensation.

Notes on the Operating Environment

When installing the product where the ambient humidity is 30% or less, it is recommended that

you use a humidifier to raise the humidity to higher levels. Use an antistatic mat as necessary.

Power Connection

Power Line Conditions

Ensure that the power supply satisfies the following requirements:

•Voltage: 85 to 132 or 170 to 265 VAC (automatic voltage switching)

•Frequency: 47 to 63 Hz

•Power consumption: 250 VAC (Printing) or 80 VAC (Stand by)

If the power line is unstable, use a voltage regulator or similar device.

Connecting to Power

To connect the ATB printer to the power line, follow the instructions below:

•Plug the power cable of the printer in a dedicated wall receptacle. Do not plug any other

electric products into the same receptacle. If the printer shares a receptacle with an air

conditioner, copy machine, or shredder, faulty operation may result due to electric noise. If a

dedicated wall receptacle cannot be used, use a commercially-available noise filter or

transformer.

•Route the power cable such that people do not step on it. Do not place anything on the power

cable.

Important Note on the Side Cover

As a measure of safety, this ATB printer cannot be operated while the side cover is open.

Close the side cover and lock the cover with the key to print coupons.

Dimensions and Weight

•8.3 inches (210mm) W x 21.6 inches (550mm) D x 15.0 inches (380mm) H

•Less than 35.3 lb. (16 kg )

Operation Manual vii

7200

INTRODUCTION

Available Types

The Sigma Data — 7200 ATB printer is classified into 2 types, i.e., Type B and Type D. Refer

to the printer types listed below when reading this manual.

Note:

Type B cannot be used for Thermal Transfer printing with a transfer ribbon.

Type Printing Method Number of Bins

Type B Direct thermal only Two internal bins and one external bin (BIN 3)

Type D Direct thermal or

thermal transfer Two internal bins and one external bin (BIN 3)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels AMT Datasouth Imprimante

AMT Datasouth

AMT Datasouth XL 300 SERIES Manuel utilisateur

AMT Datasouth

AMT Datasouth Documax 5380 Manuel utilisateur

AMT Datasouth

AMT Datasouth Accel-7450 Manuel utilisateur

AMT Datasouth

AMT Datasouth ACCEL-6300 Manuel utilisateur

AMT Datasouth

AMT Datasouth 5350s Manuel utilisateur

AMT Datasouth

AMT Datasouth Accel-7350 Manuel utilisateur

AMT Datasouth

AMT Datasouth Documax 5380 Manuel utilisateur

AMT Datasouth

AMT Datasouth Fastmark M5 Plus Series Manuel utilisateur

AMT Datasouth

AMT Datasouth Documax 6390 Manuel utilisateur

AMT Datasouth

AMT Datasouth XL 400 Series Manuel utilisateur

AMT Datasouth

AMT Datasouth Fastmark M5DT Manuel utilisateur

AMT Datasouth

AMT Datasouth Documax 6390 Manuel utilisateur

AMT Datasouth

AMT Datasouth FM402DT Manuel utilisateur

AMT Datasouth

AMT Datasouth documax 3300 Manuel utilisateur

AMT Datasouth

AMT Datasouth Fastmark M5 Plus Series Manuel utilisateur

AMT Datasouth

AMT Datasouth XL 300 XL300 XL300 Manuel utilisateur

AMT Datasouth

AMT Datasouth Accel-7350 Manuel utilisateur

AMT Datasouth

AMT Datasouth Fastmark M4 Series Manuel utilisateur

AMT Datasouth

AMT Datasouth SIGMA DATA 7200 Mode d’emploi

AMT Datasouth

AMT Datasouth CodeWriter 5106 Manuel d'utilisation et d'entretien

AMT Datasouth

AMT Datasouth Fastmark M7 Series Manuel utilisateur

AMT Datasouth

AMT Datasouth Sigma Data-7200 Manuel utilisateur

AMT Datasouth

AMT Datasouth Fastmark M7XPd Manuel utilisateur

AMT Datasouth

AMT Datasouth N3300 SERIES Guide de dépannage

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur