AMI Kit-CJE B75B Manuel utilisateur
Page 1 of 5
22166958
REV. A
Kit-CJE Core Upgrade B75B Motherboard
Kit #22166908
This kit contains the parts and instruction to install the B75B Motherboard into your CJE
Computer Core. Notice: This kit does not provide support for Modem dialup connections.
Tools Required
#2 Phillips Screwdriver, ¼ Nut Driver.
Parts Included with this Kit
Item # Part Number Description Quantity
1 40924220 B75B Motherboard 1
2 22350001 Hard Drive SSD Win10 (US) 1
3 34052405 CBA – Power On/Reset 1
4 22132269 Cable Assembly COM To I/O 1
5 22132270 Cable Assembly Power On/Reset 1
6 22157606 License – Windows 10 1
7 22167738 Label – (61197014) 1
8 22188403 Card – Trigger Code (Not Shown) 1
These Instructions
Figure 1
Installation Instructions
2
1
3
4
5
6
7
Page 2 of 5
22166958
REV. A
Removal Instructions
Caution: When installing this B75B motherboard, care should be taken to avoid static discharges
which could damage the motherboard. The motherboard installation should be done on a static
dissipative mat along with a grounding wrist strap. Retain all the screws while installing this kit.
1. Turn the jukebox power off and unplug the power cord from the wall outlet.
2. Open the jukebox door and disconnect all the harnessing to the computer core. Note where the
cables plug into the Computer Core Assembly for later reinstallation. Remove the Computer
Core from the jukebox.
3. Remove all necessary covers to access the motherboard. Unplug and remove all of the ATX power
supply and I/O board connections from the motherboard. Remove the Power and SATA DATA cable
from the hard drive. Remove the modem card and its PCI cover from the motherboard if present. It
will not be reused. Remove the three screws securing the power supply to the computer core chassis.
Carefully rotate the power supply out of the computer core chassis as shown in Figure 2.
4. Remove the POWER ON/OFF reset board and its ribbon cable connected to the motherboard they
will no longer be used.
5. Remove the Ribbon cable connected to the I/O and motherboard it also will not be reused.
6. Remove the four screws that secure the motherboard to the core chassis. The motherboard and the
front I/O panel will not be reused.
Figure 2
Power Supply
Power ON/OFF
Reset board
Motherboard
Page 3 of 5
22166958
REV. A
Installation Instructions
7. Insert the motherboard I/O shield into position and carefully align the new B75B motherboard (Item
#1) to the four existing studs of the computer core chassis. Secure the motherboard with four screws
removed in step #6.
8. Connect the POWER ON/RESET cable 22132270 (Item #5) into the keyed 10 pin header of the
POWER ON/RESET circuit board assembly 34052405 (Item #3) and reinstall into your computer
Core using the same two screws. Connect the other end of the cable to the “F Panel” header of the
B75B Motherboard. See Figure 3.
9. Connect the COM TO I/O Cable Assembly 22132269 (Item #4) to the keyed 10 pin header of the I/O
board still mounted in the computer core chassis. Connect the other end of the cable to the “COM 1”
header of the B75B motherboard. See Figure 3.
10. Connect the computer core chassis fan harness to the “SYS FAN” header of the B75B motherboard.
Figure 3
COM TO I/O
Cable
POWER ON/RESET
Board and connected
22132269 cable.
“F-Panel” header
“SYS FAN”
Header I/O Board
I/O Shield
Chassis Fan
Page 4 of 5
22166958
REV. A
11. Carefully rotate the ATX Power Supply back into position and secure with three screws previously
removed in step #3. Reconnect the ATX 20 pin, and 4-pin power connections to the B75B
motherboard. Reconnect the 4-pin power connection to the I/O board. See Figure 4.
12. Install the new 22350001 Hard Drive (Item #2) into the holder and connect the SATA power and the
SATA DATA cables to the B75B Motherboard as shown in Figure 4.
13. Reattach the covers and apply the new core computer part number label (Item #7) over the top of the
original core computer part number.
14. Reinstall the modified Computer Core into the jukebox. Reconnect all cables removed in step #2.
Take a moment to visually inspect the jukebox to ensure proper connections before powering up the
jukebox.
15. Attach the Windows 10 License (Item #6) label to the jukebox cabinet somewhere near, or over the
top of the original Windows license label.
Figure 4
SATA DATA
Cable
I/O Board power
connection
4 pin power
connection
Hard Drive power
connection
20 pin power
connection
Hard Drive
Page 5 of 5
22166958
REV. A
Power up Testing
1. Plug the jukebox back into the wall then power up the jukebox and ensure the jukebox UI comes up.
This will take some time and may include one or more reboots.
2. In order for the jukebox to connect to the AMI network, the MAC address of the computer core must
be entered into the AMI database. This will require a phone call to the AMI Tech Support line, 1-877-
ROC-N-ROL (1-877-762-6765).
a. The MAC address is found on a Service Mode screen.
b. If the jukebox is not in the Service Mode, push the Service button on the core computer.
c. Push the Calibrate button on the core computer and calibrate the touch screen.
d. Touch Diagnostics then touch System Information. The MAC address will be displayed in the third
block down from the top right.
e. To help the AMI Tech Support technician configure your jukebox in the AMI system, please have
the jukebox model and serial number along with the MAC address when you call. Inform the
technician you are installing the new motherboard upgrade kit.
3. After Tech Support has entered the MAC address of the jukebox, you will need to enter the Trigger
Code for the hard drive.
a. From the main menu in the Service Mode, touch System Setup then touch Enable/Extend
Features.
b. Using the on-screen keyboard, enter the trigger code found on the Trigger Code Card (Item #8)
then touch the Send Code button.
AMI Entertainment Network LL – 4147 Eastern Ave SE – Grand Rapids, MI 49508
Table des matières
Autres manuels AMI Carte mère
AMI
AMI IMBM-Q87A Manuel utilisateur
AMI
AMI Mark IV Screamer Manuel utilisateur
AMI
AMI MI987 Manuel utilisateur
AMI
AMI MI982 Manuel utilisateur
AMI
AMI MB960 Manuel utilisateur
AMI
AMI M920 Series Manuel utilisateur
AMI
AMI MI956 Manuel utilisateur
AMI
AMI MI946F Manuel utilisateur
AMI
AMI MI890 Manuel utilisateur
AMI
AMI 410 Manuel
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
