AMG AMG5513A5B9 Manuel utilisateur

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

AMG5513A5B9

Instruction Manual

Transmit Unit with one Bi-directional Data Signal, two Bi-

directional Alarms and one Bi-directional Audio Channel

for a Singlemode Fibre Link

The AMG5513A5B9 is a standalone transmit unit designed to transmit & receive 1 data signal, 2 Bi-

directional alarms plus 1 Bi-directional audio channel over one Singlemode optical fibre.

The AMG5513A5B9 is designed to be powered using an AMG2001 standalone power supply.

The AMG5513A5B9 is designed to operate with an AMG5514A5B9 / AMG5514A5B9R receive unit in

a point to point configuration. The R suffix in the partno. indicates a rackmount configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Contents

Introduction 3

Unit Functional Schematic .................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Optical Connections Singlemode ....................................................................................................... 4

Power Connection .............................................................................................................................. 4

Data and Alarm Channel Connections ............................................................................................... 4

Audio Connections ............................................................................................................................. 4

Front Panel Indicators 6

Power / Opto LED ............................................................................................................................... 6

Low Speed Data LEDs ....................................................................................................................... 6

Alarm LEDs......................................................................................................................................... 6

Audio LEDs ......................................................................................................................................... 6

Data and Alarm Channel Configuration 7

Data Channel Configuration ............................................................................................................... 7

Data Interface Connections ................................................................................................................ 8

Alarm Channel Configuration ............................................................................................................. 8

Alarm Interface Connections .............................................................................................................. 8

Aux. Alarm Interface Connections ...................................................................................................... 9

Audio Interface Connections .............................................................................................................. 9

Audio Channel Configuration .............................................................................................................. 9

Physical Information 10

Dimensions ....................................................................................................................................... 10

Mounting Details ............................................................................................................................... 10

Safety 10

Maintenance and Repair 10

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Introduction

Unit Functional Schematic

The

AMG5513A5B9

transmits 1 data, 2 Bi-

directional alarms and 1 audio signal to the

AMG5514A5B9 receive unit.

It also receives 1 data, 2 Bi-directional

alarms and 1 audio signal transmitted from

the AMG5514A5B9.

Optical Connection

The AMG5513A5B9 connections are illustrated in the following example which shows an

AMG5513A5B9 transmit unit together with an AMG5514A5B9 standalone receive unit configured as a

single channel point to point system.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Connections

Optical Connections Singlemode

No. of Optical Connections .................. 1

Optical Fibre ........................................ Singlemode

Connector ............................................ SC/PC

Primary Optical Launch Power ............ -10dBm

Transmit Wavelength ........................... 1310nm

Primary Optical Sensitivity ................... -30dBm

Receive Wavelength ............................ 1510nm

Minimum Optical Dynamic Range ....... 20dB.

Power Connection

Connector Type ................................... Removable 2-pin, 3.81mm, Screw Terminal

Connector Partno. ................................ Phoenix 1803578

Supply Voltage ..................................... +12 to +15 Volts DC

Maximum Power .................................. 5 Watts

Data and Alarm Channel Connections

No. of Integral Data Channels ............. 1 Selectable RS-232 / RS-422 / RS-485

No. of Alarms ....................................... 2

Connectors .......................................... Removable 5-pin, 8-pin, 2.5mm, Spring Terminal

Connector Partnos. .............................. Phoenix 1881354, 1881383

Integral Data Interfaces RS-232, RS-422 or R-S485. Selected by slide switch inside enclosure. *See

appropriate section on how to remove the case for access to the data switches

RS-485 – Switch Position - Top

RS-422 – Switch Position - Middle

RS-232 – Switch Position - Bottom

Alarm Input .......................................... Contact Closure pull-up is 330R to +3V3

Alarm Output ........................................ Solid-state Relay, maximum 150mA at 125Vac/dc, Ron < 6.5Ω

Audio Connections

No. of Audio Channels ......................... 1

Connectors .......................................... Removable 5-pin, 2.5mm, Spring Terminal

Connector Partno. ................................ Phoenix 1881354

Input level ............................................ 0dBm

Input overload level .............................. +6dBm

Input impedance .................................. 10kΩ / 600Ω

Output impedance ............................... 600Ω

Frequency response ........................... 10Hz to 20KHz

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Audio Input impedance is selected by removable jumper JP1 or JP2 on Audio Expansion board inside

enclosure. *See appropriate section on how to remove the case for access to the data/audio switches.

1-2 – High Impedance 10kΩ

2-3 – Balanced 600Ω

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Front Panel Indicators

Power / Opto LED

Power / Opto ........................................ Green - Unit powered, Opto sync.

Red - Unit powered, no Opto sync.

Off - No power applied to unit

Low Speed Data LEDs

Data Present IN (RS485 or RS422) .... Green - logic zero (+V, -V) present on IN+, IN-

Red - logic one (-V,V+) present on IN+, IN-

Off - tri-state off or no connection on IN+, IN-

Data Present IN (RS232) ..................... Green - logic zero (+V) present on input IN+

Red - logic transitions present on input IN+

Off - logic one (-V) present on input IN+

IN corresponds to the data signals being transmitted onto the optical fibre.

Data Present OUT (RS485 or RS422) Green - logic zero (+V,-V) present on OUT+, OUT-

Red - logic one (-V,+V) present on OUT+, OUT-

Off - tri-state off or no connection on OUT+, OUT-

Data Present OUT (RS232) ................. Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

OUT corresponds to the data signals being received from the optical fibre.

Alarm LEDs

Channel 1

ALARM IN ............................................ Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

ALARM OUT ........................................ Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

Channel 2

ALARM IN ............................................ Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

ALARM OUT ........................................ Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

Audio LEDs

Audio Present TX ................................. Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being transmitted on the optical fibre

Audio Present RX ................................ Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being received from the optical fibre.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Data and Alarm Channel Configuration

The AMG5513A5B9 transmit unit sends and receives data to/from an AMG5514A5B9 or rackmount

equivalent AMG5514A5B9R receive unit. The physical data interface RS-485, RS-422 or RS-232 is

selectable by the user with the slide switch mounted on the main PCB inside the enclosure.

Two bi-directional alarms are also provided. Each alarm input is typically connected to a contact

closure switch. An alarm output can receive an on/off signal from an AMG5514A5B9 and is typically

used to convey contact closure status.

Data Channel Configuration

Each low speed data channel provides an RS-232, RS-422 (full duplex, four wire) or RS-485 (half

duplex, two wire) interface defined by the corresponding mode switch inside the enclosure. Every data

channel as shipped from the factory is set up for RS-485 operation unless otherwise requested.

The data input for both the RS-485 and the RS-422 modes detects a tri-state input condition by

monitoring the differential voltage level across the input. A differential level below 600mV positive or

negative will be detected as a tri-state condition. A level above 600mV positive or negative will be

detected as a logic 1 or logic 0 respectively. It is important therefore to terminate the RS-485 bus or

the RS-422 input bus using 120Ω if a pre-bias is present on the RS-485 or RS-422 bus.

A large number of third party equipment manufacturers apply a pre-bias on their RS-485 bus. This pre-

bias is applied by pulling one arm of the RS-485 bus high (+5 volts) and the other arm low (0 volts)

using high value resistors within the third party equipment. In order to ensure that the AMG equipment

detects a tri-state condition, then these resistors should have a value above 5kΩ. If the third party

bias resistors are less the 750Ω the bus can be multiple terminated as required to ensure that a tri-

state level is detected.

The system detects a tri-state input condition on the data channel bus when in RS-485 or RS-422

mode.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Data Interface Connections

Connector

Pin No.

Data Channel

RS-485

[switch top]

RS-422

[switch middle]

RS-232

[switch bottom]

IN + (A) IN

IN - (B)

GND GND GND

IN/OUT + (A) OUT + (A)

IN/OUT - (B) OUT - (B) OUT

Note: (A) or (B) in brackets in the above table refers to RS-485 / RS-422 data specification.

Alarm Channel Configuration

The AMG5513A5B9 provides 2 bi-directional contact closure inputs / alarm outputs. Each ALARM IN

input is via an internal 10kΩ series resistor with a 47kΩ pull-up resistor to the internal +3V3 supply.

Each ALARM OUT output can receive an on/off signal from an AMG5514A5B9 and is typically used to

convey contact closure status. Each alarm output is an NPN open collector circuit with a maximum

rated continuous load of 500mA / 24Vdc.

Alarm Interface Connections

Connector

Pin No.

Alarm Interface

Alarm IN

Alarm OUT

GND

ALARM IN +

ALARM OUT -

ALARM OUT +

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 9 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Aux. Alarm Interface Connections

Connector

Pin No.

Alarm Interface

Alarm IN

Alarm OUT

ALARM OUT +

ALARM OUT -

GND

ALARM IN +

ALARM IN -

(GND)

Audio Interface Connections

Connector Pin

No.

Balanced Input

600Ω

High Z input 10kΩ

OUT - OUT -

OUT + OUT +

GND GND

IN + IN

IN - GND

Audio Channel Configuration

The AMG5513A5B9 provides one bi-directional audio channel.

The audio channel input can be configured as a single-ended high impedance 10kΩ input with GND

reference or alternativly as a balanced 600Ω input pair. The input impedance is selected using

jumpers on the audio expansion board JP1 (Channel 1) or JP2 (Channel 2), the default setting is

balanced 600Ω.

JP1/JP2 1-2 – High Impedance 10kΩ

JP1/JP2 2-3 – Balanced 600Ω

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 10 of 12 AMG5513A5B9 Instruction Sheet

D17369-00.doc

Physical Information

Dimensions

Height................................................... 112mm

Width .................................................... 170mm (excluding connectors)

Depth ................................................... 70mm

Weight .................................................. 750grams

Mounting Details

The AMG unit is supplied with a clip-on mounting bracket which should be attached to a panel or wall

using 2 off 4.0mm screws, see diagram on page 1 for dimensions. The unit is clipped into the

mounting bracket, and is then held firmly in position.

Safety

AMG Optical Fibre Products use Class 1 laser systems in accordance with EN 60825-2:2000.

It is always advisable to follow good practice when working with optical fibre systems. This includes:

 Do not stare with unprotected eyes or with any unapproved collimating device at fibre

ends or connector faces, or point them at other people.

 Use only approved filtered or attenuating viewing aids

For other safety issues and advice on good practice associated with optical fibre systems, please see

EN 60825-2:2000 or your local safety officer.

Maintenance and Repair

There are no user serviceable parts within AMG products. See unit data sheet for full specification.

In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at

3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK.

Phone +44 (0) 1767 600 777

Technical Support +44 (0) 1767 604 491

Email techsupport@amgsystems.com

Table des matières

Autres manuels AMG Émetteur

AMG

AMG AMG5913-2A9R Manuel utilisateur

AMG

AMG AMG2648 Manuel utilisateur

AMG

AMG AMG5513 Manuel utilisateur

AMG

AMG AMG5913-2A9 Manuel utilisateur

AMG

AMG AMG5513A6B9 Manuel utilisateur

AMG

AMG AMG5615 Manuel utilisateur

AMG

AMG AMG4683E Manuel utilisateur

AMG

AMG AMG4787BER-SF Manuel utilisateur

AMG

AMG AMG4723 Manuel utilisateur

AMG

AMG AMG3747BE Manuel utilisateur

AMG

AMG AMG4783RN-CWDMn Manuel utilisateur

AMG

AMG AMG4627B Manuel utilisateur

AMG

AMG AMG4707A-DR-SF Manuel utilisateur

AMG

AMG AMG4647B Manuel utilisateur

AMG

AMG AMG6781 Manuel utilisateur

AMG

AMG AMG4647-ULTRA1 Manuel utilisateur

AMG

AMG AMG4703E-SF Manuel utilisateur

AMG

AMG AMG4783R-SF-CWDMn-C Manuel utilisateur

AMG

AMG AMG4687B Manuel utilisateur

AMG

AMG AMG4707AEG Manuel utilisateur

AMG

AMG AMG3741G-DR-SF Manuel utilisateur

AMG

AMG AMG4783B R-SF Series Manuel utilisateur

AMG

AMG AMG4681-1550-C Manuel utilisateur

AMG

AMG AMG5803A966G-DF Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur