Allied Telesis AT-FS716 Manuel utilisateur

AT-FS716

AT-FS716E

AT-FS724i

Fast Ethernet Switches

Installation Guide

PN 613-10804-00 Rev F

960 Stewart Drive Suite B, Sunnyvale CA 94086, USA

from Allied Telesyn, Inc.

Ethernet is a registered trademark of Xerox Corporation. All other product names, company names,

logos or other designations mentioned herein are trademarks or registered trademarks of their

respective owners.

Allied Telesyn, Inc. reserves the right to make changes in specifications and other information

contained in this document without prior written notice. The information provided herein is subject

to change without notice. In no event shall Allied Telesyn, Inc. be liable for any incidental, special,

indirect, or consequential damages whatsoever, including butnot limited to lost profits,arising out of

or related to this manual or the information contained herein, even if Allied Telesyn, Inc. has been

advised of, known, or should have known, the possibility of such damages.

iii

Electrical Safety and Emissions Compliance

Statement

For AT-FS716 and AT-FS716E

Standards: This product meets the following standards.

RFI Emission EN55022 Class A !1

Warning: In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures. !2

Power to the hub must be sourced only from the adapter. (AT-FS716E) !3

U.S. Federal Communications Commission

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and , if not installed and used in accordance with this instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the

FCC, can void your right to operate this equipment.

Canadian Department of Communications

This Class A digital apparatus meets all requirements of the Canadian Interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur

le matériel brouilleur du Canada.

Electrical Safety and Emissions Compliance Statement

For AT-FS724i

Standards: This product meets the following standards.

U.S. Federal Communications Commission

Declaration Of Conformity

Manufacture Name: Allied Telesyn, Inc.

Manufacture Address: 960 Stewart Drive, Suite B

Sunnyvale, CA 94085 USA

Manufacture Telephone: 408-730-0950

Declares that the product: Fast Ethernet Switch

Model Number: AT-FS724i

This product complies with FCC Part 15B, Class B Limits: This device complies with

part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device must not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Radiated Energy

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with instructions, may cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on.

The user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes and modifications not expressly approved by the manufacturer or registrant

of this equipment can void your authority to operate this equipment under Federal

Communications Commission rules.

AT-FS716 Series and AT-FS724i Installation Guide

For All Models

Immunity EN55024 !4

Electrical Safety TUV-EN60950, UL 1950 (UL/cUL) !5

Important: Appendix B contains translated safety statements for installing this

equipment. When you see the !, go to Appendix B for the translated safety statement in

your language.

Wichtig: Anhang B enthält übersetzte Sicherheitshinweise für die Installation dieses

Geräts. Wenn Sie !sehen, schlagen Sie in Anhang B den übersetzten

Sicherheitshinweis in Ihrer Sprache nach.

Vigtigt: Tillæg B indeholder oversatte sikkerhedsadvarsler, der vedrører installation af

dette udstyr. Når De ser symbolet !, skal De slå op i tillæg B og finde de oversatte

sikkerhedsadvarsler i Deres eget sprog.

Belangrijk: Appendix B bevat vertaalde veiligheidsopmerkingen voor het installeren

van deze apparatuur. Wanneer u de !ziet, raadpleeg Appendix B voor vertaalde

veiligheidsinstructies in uw taal.

Important: L'annexe B contient les instructions de sécurité relatives à l'installation de

cet équipement. Lorsque vous voyez le symbole !, reportez-vous à l'annexe B pour

consulter la traduction de ces instructions dans votre langue.

Tärkeää: Liite B sisältää tämän laitteen asentamiseen liittyvät käännetyt turvaohjeet.

Kun näet !-symbolin, katso käännettyä turvaohjetta liitteestä B.

Importante: l’Appendice B contiene avvisi di sicurezza tradotti per l’installazione di

questa apparecchiatura. Il simbolo !, indica di consultare l’Appendice B per l’avviso di

sicurezza nella propria lingua.

Viktig: Tillegg B inneholder oversatt sikkerhetsinformasjon for installering av dette

utstyret. Når du ser !, åpner du til Tillegg B for å finne den oversatte

sikkerhetsinformasjonen på ønsket språk.

Importante: O Anexo B contém advertências de segurança traduzidas para instalar este

equipamento. Quando vir o símbolo !, leia a advertência de segurança traduzida no seu

idioma no Anexo B.

Importante: El Apéndice B contiene mensajes de seguridad traducidos para la

instalación de este equipo. Cuando vea el símbolo !, vaya al Apéndice B para ver el

mensaje de seguridad traducido a su idioma.

Obs! Bilaga B innehåller översatta säkerhetsmeddelanden avseende installationen av

denna utrustning. När du ser !, skall du gå till Bilaga B för att läsa det översatta

säkerhetsmeddelandet på ditt språk.

vii

Table of Contents

Electrical Safety and Emissions Compliance Statement ....................iii

For AT-FS716 and AT-FS716E.........................................................................iii

For AT-FS724i ...................................................................................................iv

For All Models.....................................................................................................v

Welcome to Allied Telesyn ..........................................................................ix

Where to Find Related Guides..........................................................................ix

Document Conventions .....................................................................................ix

Contacting Allied Telesyn Technical Support...................................................x

Online Support............................................................................................x

Telephone Support ......................................................................................x

E-mail Support...........................................................................................xi

Returning Products ...........................................................................................xi

Management Software Updates .......................................................................xi

For Sales or Corporate Information ................................................................xii

Tell Us What You Think ..................................................................................xii

Chapter 1

Overview ..........................................................................................................1

Key Features.......................................................................................................2

Status LEDs........................................................................................................3

Power Requirements ..........................................................................................3

Internal Power Supply................................................................................3

External Power Supply...............................................................................3

Auto MDI/MDI-X................................................................................................4

Auto-negotiation.................................................................................................4

Network Topologies............................................................................................5

Power Workgroup Topology........................................................................5

Cascade Topology ........................................................................................6

Table of Contents

viii

Chapter 2

Installation ......................................................................................................7

Verifying the Package Contents ........................................................................7

Planning the Installation...................................................................................8

Selecting a Site............................................................................................8

Reviewing Safety Guidelines......................................................................9

Installing the Switch on a Table or Desktop...................................................10

Rackmounting the Switch................................................................................11

Warranty Registration .....................................................................................13

Chapter 3

Troubleshooting ...........................................................................................15

Appendix A

Technical Specifications ............................................................................17

Physical.............................................................................................................17

Environmental..................................................................................................17

Electrical Rating...............................................................................................18

Agency Compliance...........................................................................................18

Pinout Assignments..........................................................................................19

Appendix B

Translated Safety and Emission Information .......................................21

For AT-FS716 and AT-FS716E........................................................................22

For AT-FS724i...................................................................................................24

All Models..........................................................................................................25

This guide contains instructions on how to install the AT-FS716, AT-FS716E,

and AT-FS724i Fast Ethernet Switches.

Where to Find Related Guides

The Allied Telesyn web site at www.alliedtelesyn.com offers you an easy

way to access the most recent documentation, software, and technical

information for all of our products. For product guides, select “Support &

Services” from our web site.

Document Conventions

This guide uses the following conventions:

Note

Notes provide additional information.

Caution

Cautions informs you that performing or omitting a specific action may

result in equipment damage or loss of data.

Warning

Warnings informs you that performing or omitting a specific action may

result in bodily injury.

Welcome to Allied Telesyn

Contacting Allied Telesyn Technical Support

You can contact Allied Telesyn technical support online or by telephone or

e-mail.

Online Support

You can request technical support online by accessing the Knowledge Base at

http://kb.alliedtelesyn.com. You can use the Knowledge Base to submit

questions to our technical support staff and review answers to previously

asked questions.

Telephone Support

For technical support by phone, contact Allied Telesyn at one of the following

locations:

Americas

United States, Canada, Mexico,

Central America, South America

Tel: 1 (800) 428-4835

Germany

Germany, Switzerland, Austria, Eastern

Europe

Tel: (+49) 30-435-900-126

Asia

Singapore, Taiwan, Thailand, Malaysia,

Indonesia, Korea, Philippines, China,

India, Hong Kong

Tel: (+65) 3815-612

Italy

Italy, Spain, Portugal, Greece, Turkey,

Israel

Tel: (+39) 02-41-30-41

Australia

Tel: 1 (800) 000-880 Japan

Tel: (+81) 3-3443-5640

France

France, Belgium, Luxembourg,

The Netherlands, Middle East, Africa

Tel: (+33) 0-1-60-92-15-25

United Kingdom

United Kingdom, Denmark, Norway,

Sweden, Finland

Tel: (+0044) 1235-442500

Autres manuels pour AT-FS716

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Allied Telesis Changer

Allied Telesis

Allied Telesis AT-IFS802SP/POE Manuel utilisateur

Allied Telesis

Allied Telesis x600 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS708/POE Manuel utilisateur

Allied Telesis

Allied Telesis AT-9108 Manuel utilisateur

Allied Telesis

Allied Telesis AT-GS950/48 Manuel utilisateur

Allied Telesis

Allied Telesis AT-4016TR Manuel utilisateur

Allied Telesis

Allied Telesis AT-PB200 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-9424Ts AC Manuel utilisateur

Allied Telesis

Allied Telesis AT-8224 Manuel utilisateur

Allied Telesis

Allied Telesis x530 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-9424Ts/XP AC Manuel utilisateur

Allied Telesis

Allied Telesis AT-IE200-6GT-80 Manuel d'installation

Allied Telesis

Allied Telesis x330 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-IX5-28GPX Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS704 Manuel utilisateur

Allied Telesis

Allied Telesis LanEdge FastHub16 Manuel utilisateur

Allied Telesis

Allied Telesis AT-9000/52 Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS201 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-IS230-10GP Manuel utilisateur

Allied Telesis

Allied Telesis AT-IX5-28GPX Manuel utilisateur

Allied Telesis

Allied Telesis SB251-01 Manuel utilisateur

Allied Telesis

Allied Telesis GS950PS V2 Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-8800 Series Manuel utilisateur

Allied Telesis

Allied Telesis SwitchBlade AT-SB4108-00 Manuel d'utilisation et d'entretien

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur