Allied Telesis AT-8800 Series Manuel utilisateur

AT-8800 Series Switch

Quick Install Guide

AT-8824

AT-8848

AT-8800 Series Quick Install Guide

Document Number C613-04043-01 REV D

19800 North Creek Parkway, Suite 200, Bothell, WA 98011, USA.

permission from Allied Telesis.

Allied Telesis International, Corp. reserves the right to make changes in specifications

and other information contained in this document without prior written notice. The

information provided herein is subject to change without notice. In no event shall Allied

Telesis be liable for any incidental, special, indirect, or consequential damages

whatsoever, including but not limited to lost profits, arising out of or related to this

manual or the information contained herein, even if Allied Telesis has been advised of,

known, or should have known, the possibility of such damages.

All trademarks are the property of their respective owners.

Quick Install Guide 3

C613-04043-01 REV D

Models Covered By This Guide

This Quick Install Guide includes information on the following models:

■AT-8824

■AT-8848

Quick Install Guide updates can be downloaded from www.alliedtelesis.com/

support/software.

Package Contents

The following items are included with each AT-8800 Series switch. Contact

your sales representative if any items are damaged or missing.

■One AT-8800 Series switch.

■One AC power cord.

■One power cord retaining clip.

■One serial cable for connecting the switch to a terminal or PC.

■One 19 inch rack-mount kit.

■One AT-8800 Series Quick Install Guide.

■One Safety and Statutory Information booklet.

■One AT-8800 Series Documentation and Tools CD-ROM (which includes

the complete AT-8800 Series Document Set and utilities).

■One warranty card.

AT-8800 Series

Printed Acrobat PDF Website

Documentation Roadmap

AT-8800 Series Safety and Statutory Information Booklet

General Customer Support

Visit www.alliedtelesyn.co.nz for

the latest documentation, FAQs,

and support information.

AT-8800 Series Quick Install Guide

AT-8800 Series Software Reference

AT-8800 Series Hardware Reference

AT-8800 Series User Guide

4AT-9800 Series Switch

C613-04043-01 REV D

Selecting a Site

The switch can be installed in a standard 19-inch rack or on a level surface such

as a desktop or bench. When installing the switch, choose a site that:

■Allows adequate airflow around the switch and its vents.

■Is free of dust and moisture.

■Will maintain an ambient temperature range of 0-50º C (32-122º F) and a

humidity range of 5-95% non-condensing.

■Has a reliable and earthed (grounded) power supply circuit, preferably

dedicated and filtered.

■Does not expose cabling to sources of electrical noise, such as radio

transmitters, broadband amplifiers, power lines, electric motors, and

fluorescent fixtures.

■Allows easy access to the switch’s power and cable connections.

■Will allow all related network devices to be connected to the switch

without exceeding maximum cable length limitations. See the AT-8800

Series Hardware Reference for cable length specifications.

Installing the Switch

This equipment must be earthed.

Follow these steps to install the switch:

1. Read the safety information

For safety information, see the Safety and Statutory Information booklet. A

copy of this booklet is supplied with each switch, and can also be found on

the Documentation and Tools CD-ROM or at www.alliedtelesis.com/support/

software.

2. Gather the tools and equipment you will need

If the switch is to be connected to a redundant power supply, you will need

a redundant power supply unit and cable (see step 8).

To install the switch in a rack you will need screws and cage nuts to attach

the brackets to your rack. These are supplied with the switch.

3. Choose a suitable site for the switch

Either a flat surface or 19 inch rack.

4. Unpack the switch

Verify the package contents. If any items are damaged or missing, contact

your sales representative.

Quick Install Guide 5

C613-04043-01 REV D

5. Place the switch in its operating location

If installing the switch in a rack:

• Remove the rubber feet

• Attach the rack-mounting brackets.

Use the screws provided with the switch to mount it in a rack. Other screws

may damage the switch.

• Mount the switch in the rack

6. Apply AC power to the switch

Plug the power cord into the AC power connector on the switch’s rear

panel, as shown in Figure 1. The FAULT LED may light for one or two

seconds as the switch runs internal tests. If the LED remains lit, refer to the

AT-8800 Series Hardware Reference for troubleshooting information.

Figure 1: AT-8848 front panel and rear panel with AC power inlet.

7. Fit the power cord retaining clip.

A retaining clip is supplied with the switch for the AC power inlet on the

switch’s rear panel. Fit this clip to secure the power cord in place.

8. Check that the Power LED on the switch’s front panel lights green

If the PWR LED fails to light, refer to the AT-8800 Series Hardware Reference

for troubleshooting information.

9. Connect the Redundant Power Supply (Optional)

AT-8800 Series switches have a Redundant Power Supply (RPS) connector

on their rear panel.

The Switch is designed to operate with the AT-RPS8000 RPS, which can be

purchased separately. See the AT-8800 Series Hardware Reference or contact

your authorised Allied Telesis distributer or reseller for more information.

10. Install GBICs (Optional)

Slide the GBICs into the GBIC slots. Press each GBIC firmly into place.

A range of GBICs have been tested and approved for use with AT-8800 Series switches.

See the AT-8800 Series Hardware Reference or contact your authorised Allied Telesis

distributor or reseller for more information, or visit www.alliedtelesis.com/support/

software.

LINK

ACT

L/A

L/A GBIC

ENABLED

FAULT

GBIC

D/CL/A

LINK 100M ACT LINK 10M ACT

L/A

FULL DUP HALF DUP COL

PORT ACTIVITY

AT-8848

Intelligent Workgroup Switch

RESET

ASYN0

FAULT PWRRPS

33 35 37 39 41 43 45 47

34 36 38 40 42 44 46 48

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

17 19 21 23 25 27 29 31

18 20 22 24 26 28 30 32

D/CL/AL/A D/CL/AL/A D/CL/A

6AT-9800 Series Switch

C613-04043-01 REV D

RX and TX terminal locations on SC fibre GBIC ports are the reverse of RX and TX

terminal locations on fixed SC fibre ports. When looking at an SC fibre GBIC from the

front, the RX terminal is on the left and the TX terminal is on the right.

11. Connect the data cables

Make sure each cable connection is secure. The switch will now perform

basic Layer 2 switching functions.

Configuring the Switch

Some configuration is necessary if you wish to enable the switch’s advanced

switching capabilities. The switch can be configured via the Command Line

Interface (CLI) or Graphical User Interface (GUI).

Using the CLI to configure a switch

1. Connect a terminal or PC to ASYN0 (RS-232)

Using the supplied RJ-45 to DB9F cable, connect your terminal or PC to the

ASYN0 port on the switch’s front panel.

2. Set the communication parameters

Set the communication parameters on your terminal or terminal emulation

program to:

• Baud rate: 9600

• Data bits: 8

•Parity:None

•Stopbits:1

• Flow control: Hardware

3. Check the power supply

Ensure that the On/Off switch is in the On position and that the switch is

receiving power (PWR LED lights green).

4. Log in

After the switch has booted, the log in prompt appears. If the log in prompt

doesn’t appear, press [Enter] two or three times.

When the switch boots for the first time it automatically creates an account

with manager privileges. The account has the log in name “manager” and

the password is “friend”.

At the log in prompt, enter the log in name and password.

Password: friend

The switch’s command prompt appears and you can now configure the

switch using the command line interface.

Change the password as soon as possible. Leaving the manager account with

the default password is a serious security risk. Make sure you remember the

new password as there is no way to retrieve it if it is lost.

Quick Install Guide 7

C613-04043-01 REV D

Use the following command to change the account password:

set password

Use the following commands to save the configuration with the newly

created password and set the switch to use it on bootup:

create config=your-name.cfg

set config=your-name.cfg

To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help topic

Alternatively, type a question mark (?) at the end of a partially completed

command to see a list of valid options.

See the AT-8800 Series Software Reference for more information on configuring

the switch.

Using the GUI to configure a switch:

This section describes how to establish a connection to the switch through the

GUI, so you can configure the switch before installing it in your LAN. For more

information about the GUI, see the Using the Graphical User Interface (GUI)

chapter of the AT-8800 Series Software Reference.

1. Select a PC to browse to the switch from

You can browse to the switch from any PC that is running a supported

operating system with a supported browser installed. JavaScript must be

enabled. If you are using a toolbar or plug-in on your browser to block

pop-ups, disable it while using the GUI. The GUI displays detailed

configuration options and information in pop-up windows.

You need to know the PC’s subnet.

2. Connect the PC to the switch

Use an Ethernet cable to connect an Ethernet card on the PC to any one of

the switch’s switch ports.

You can browse to the switch through any VLAN, as long as you give that interface an

IP address (see below). The recommended LAN interface is vlan1, and these instructions

assume you will use vlan1 as the LAN interface. The switch’s ports all belong to vlan1

by default.

3. Access the switch’s command line interface

Access the CLI from the PC, as described in the previous “Using the CLI to

configure a switch” section.

4. Enable IP

enable ip

5. Assign the vlan1 interface an unused IP address in the same subnet as the PC

add ip interface=vlan1 ip=ipaddress mask=mask

8AT-9800 Series Switch

C613-04043-01 REV D

6. Save the configuration and set the switch to use it on bootup

create config=your-name.cfg

set config=your-name.cfg

7. On the PC’s web browser, bypass the HTTP proxy server, if necessary

8. Point your web browser at vlan1’s IP address

9. At the login prompt, enter the user name and password

The default username is manager:

User Name: manager

Password: friend

The System Status page is displayed. Select options from the sidebar menu

to configure and manage the switch.

For context-sensitive online help, click on the Help button at the top of the

sidebar menu or on any pop-up page.

System LEDs

The AT-8800 Series Hardware Reference has further troubleshooting information,

including information on Switch Port LEDs.

Documentation and Tools CD-ROM

The Documentation and Tools CD-ROM bundled with each switch contains the

complete Documentation Set for AT-8800 Series switches and their expansion

options, as well as tools for managing the switch. This includes:

■The AT-8800 Series Statutory and Safety Information booklet, which provides

safety and statutory information for the switch and its expansion options.

■The AT-8800 Series Hardware Reference, which provides detailed

information on the hardware features of AT-8800 Series switches.

■This Quick Install Guide.

■The AT-8800 Series Software Reference, which provides detailed information

on configuring the switch and its software.

■AT-TFTP Server for Windows, for downloading software releases.

■Adobe Acrobat Reader, for viewing online documentation.

Table 2: System LEDs for AT-8800 Series switches.

LED State Function

RPS (Redundant

Power Supply)

Green An RPS is connected to the switch and is supplying

power.

FAULT Red The switch or management software is malfunctioning.

PSU fail.

PWR

(Power)

Green The switch is receiving power from the AC power

source.

Autres manuels pour AT-8800 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Allied Telesis Changer

Allied Telesis

Allied Telesis AT-GS950/48 Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS708 Manuel utilisateur

Allied Telesis

Allied Telesis AT-x230-10GP Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS201 Series Manuel utilisateur

Allied Telesis

Allied Telesis x900-12X Series Manuel utilisateur

Allied Telesis

Allied Telesis AT GS900/5E Manuel utilisateur

Allied Telesis

Allied Telesis AlliedWare Plus x530DP Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-8POE Manuel utilisateur

Allied Telesis

Allied Telesis AT-9900s Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-GS950/24 Manuel utilisateur

Allied Telesis

Allied Telesis AT-8516F/SC Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-SB*908 GEN2 Manuel utilisateur

Allied Telesis

Allied Telesis AT-9424T/SP Series Manuel utilisateur

Allied Telesis

Allied Telesis AT-XS916MXT Manuel utilisateur

Allied Telesis

Allied Telesis AT-8600 Series Manuel d'installation et d'exploitation

Allied Telesis

Allied Telesis WebSmart AT-FS750/48 Manuel utilisateur

Allied Telesis

Allied Telesis Rapier i AT-RP16Fi/SC Manuel utilisateur

Allied Telesis

Allied Telesis AT-FS705EFC Manuel utilisateur

Allied Telesis

Allied Telesis AT-x550-18XTQ Manuel utilisateur

Allied Telesis

Allied Telesis AT-8000S/48 Manuel utilisateur

Allied Telesis

Allied Telesis AT-9424Ts/XP AC Manuel utilisateur

Allied Telesis

Allied Telesis Rapier 16fi Guide d'application

Allied Telesis

Allied Telesis AT-GS950/48 Manuel utilisateur

Allied Telesis

Allied Telesis x330-10GTX Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur