Allen-Bradley 1202-CBL-KIT-100M Manuel utilisateur

DPI Screw Terminal Cable Adapter Kits

Installation Instructions

Items Included with each Kit

Important: When using the Adapter-Only Kit (Catalog # 1202-TB-KIT-SET), we have tested and recommend using a cable sold by

Quabbin (p/n 2906), or equivalent. The Quabbin cable is an equivalent to the cable supplied in the Full Kit (Catalog # 1202-

CBL-KIT-100M) except that it has different wire pair colors (see Table 1 on back page) and a foil shield.

DPI Cable Requirements/Recommendations

1. The maximum cable distance between a DPI peripheral and DPI host is:

2. The maximum DPI cable length is the SUM of all connected cables between the drive and peripherals(s). This includes all cables

connected via the DPI Screw Terminal cable, 1203-S03 splitter cable, and 1203-SG2/1203-SG4 expander modules.

3. The installer must follow common system wiring practices and route cables away from sources of EMI, such as drive input power and

motor cables.

Full Kit

Catalog # 1202-CBL-KIT-100M

Adapter-Only Kit

Catalog # 1202-TB-KIT-SET

Qty. Item Description Qty. Item Description

2 8-pin MiniDIN-to-Screw Terminal Adapter 2 8-pin MiniDIN-to-Screw Terminal Adapter

1 Mini-screwdriver (fits screw terminals) 1 Installation Instructions (this sheet)

1 Wire Strip Tool (for stripping 26 AWG wire ends) NOTE: The Adapter-Only Kit is provided so additional cable

assemblies can be made with the 100 meter cable supplied

in the Full Kit. It can also be used by customers that already

have the tools and purchase their cable separately.

100 m Cable (26 AWG x 4 twisted and shielded pairs)

1 Installation Instructions (this sheet)

•75 meters with 500 kbps DPI data rate

•100 meters with 125 kbps DPI data rate

Screw Terminal

Cable Adapter

20-HIM-C3S

20-HIM-C5S

20-HIM-B1

20-HIM-C3S

20-HIM-C5S

20-HIM-B1

Cable Length Calculations:

•

(1) 1203-S03 + (4) Screw Terminal Cable Adapters = 1.5 m (5 x 0.3 m)

•

100 m maximum - 1.5 m = 98.5 m additional cable length allowed

•

98.5 m

2 peripherals = 49.25 m each if equi-distant lengths are desired (not required)

1203-S03

Splitter Cable

49.25 m 49.25 m

DPI @ 125 kbps

0.3 m

0.3 m0.3 m 0.3 m

0.3 m

Example

Screw Terminal

Cable Adapter

Publication 1202-IN001B-EN-P – May 2004 P/N 319926-P02

Cable Connections

1. At one end of the connecting cable, strip back the cable jacket 30 mm (1.18 in.) to expose the shield and twisted wire pairs. Then strip

back the cable’s shield 24 mm (0.94 in.) to expose the twisted wire pairs. Remove 4 mm (0.16 in.) of insulation from the wires of each

twisted pair. Then connect the stripped wires of each twisted pair to their corresponding terminals shown in Table 1:

Important: Cable wire colors are subject to change at any time. If the connecting cable wire colors are different than those listed above,

make sure that each twisted pair is terminated to the same terminal numbers on both ends of the cable.

2. Make sure that the connecting cable’s shield is tightly secured under the cable shield clamp (A). If a foil shield is used (Quabbin cable),

the blue side of the foil shield is non-conductive. In this case, fold back the foil to expose the silver side of the foil to the shield clamp

before installing.

3. Tightly secure the connecting cable’s outer jacket under the cable strain relief clamp (B).

4. The terminal adapter’s two mounting holes (C) can be used to secure the adapter to a flat surface. Use #8 screws (not supplied) of an

appropriate length for the application.

5. Connect the other end of the connecting cable to the second terminal adapter. Repeat steps 1 through 4.

Table 1: Cable Wire Connections

Integral Cable of Terminal Adapter Connecting Cable Wire Colors

MiniDIN Plug Connected to . . . Cable in Full Kit (1)

(1) Twisted pair wire colors for the 100 meter cable supplied with the Full Kit (Catalog # 1202-CBL-KIT-100M).

Quabbin Cable (2)

(2) Twisted pair wire colors for the Quabbin cable (p/n 2906) that is recommended when using the Adapter-Only Kit (Catalog # 1202-TB-KIT-SET).

Pin 1 Terminal 1 Black Twisted Pair White/Green Tw i s t e d Pa i r

Pin 6 Terminal 2 Green Green

Pin 3 Terminal 3 Red Twisted Pair White/Orange Twi s t e d Pa i r

Pin 4 Terminal 4 Orange Orange

Pin 5 Terminal 7 Yellow Twisted Pair Brown Tw i s t e d Pa i r

Pin 8 Terminal 8 White White/Brown

Pin 2 Terminal 6 Brown Twisted Pair White/Blue Tw i s t e d Pa i r

Pin 7 Terminal 5 Blue Blue

Shell Shield clamp (A) Shield — Shield —

P3 P6

P4 P5 P8

Connecting Cable

(6.2 mm opening in adapter housing)

approx. 0.3 m (12 in.)

(Cable Shield Clamp) (Adapter

Mounting

Holes)

(Cable Strain Relief Clamp)

56 78

234

Male Connector

Ce manuel convient aux modèles suivants

Autres manuels Allen-Bradley Adaptateur

Allen-Bradley

Allen-Bradley Rockwell Automation 1734-AENT Manuel utilisateur

Allen-Bradley

Allen-Bradley 140G Series Manuel utilisateur

Allen-Bradley

Allen-Bradley 140G Series Manuel utilisateur

Allen-Bradley

Allen-Bradley ArmorPoint DeviceNet 1738-ADN12 Manuel utilisateur

Allen-Bradley

Allen-Bradley FLEX I/O PROFIBUS 1794-APBDPV1 Manuel utilisateur

Allen-Bradley

Allen-Bradley Flex I/O Manuel utilisateur

Allen-Bradley

Allen-Bradley 2711P-RAAT7 Manuel utilisateur

Allen-Bradley

Allen-Bradley 2100-ENET Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlNet 1786-BNC2TNC Manuel utilisateur

Allen-Bradley

Allen-Bradley ControlNet 1786-RPA/B Manuel utilisateur

Allen-Bradley

Allen-Bradley D Series Manuel utilisateur

Allen-Bradley

Allen-Bradley 5069-AENTR Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 22-COMM-B Manuel utilisateur

Allen-Bradley

Allen-Bradley FLEX 5000 Manuel utilisateur

Allen-Bradley

Allen-Bradley PowerFlex 755T Manuel utilisateur

Allen-Bradley

Allen-Bradley 20-COMM-M Modbus/TCP Adapter Manuel utilisateur

Allen-Bradley

Allen-Bradley 140G Series Manuel utilisateur

Allen-Bradley

Allen-Bradley POINT I/O 1734-ADN Manuel utilisateur

Allen-Bradley

Allen-Bradley E3 Plus Manuel utilisateur

Allen-Bradley

Allen-Bradley PLC-5 series Manuel utilisateur

Allen-Bradley

Allen-Bradley Compact I/O 1769-ADN DeviceNet Manuel utilisateur

Allen-Bradley

Allen-Bradley 1734-AENTR Manuel utilisateur

Allen-Bradley

Allen-Bradley 1738 ArmorPOINT Manuel utilisateur

Allen-Bradley

Allen-Bradley POINT I/O ControlNet 1734-ACNR Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur