Aleratec 280113 Manuel utilisateur
USER GUIDE
Aleratec
DVD/CD RoboRacer LS Duplex™
Win/Mac
Part No. 280113
www.aleratec.com
Copyright/Model Identification
The content of this manual is for informational purposes only and is subject
to change without notice.
This manual is copyright with all rights reserved. Under copyright laws, this
manual and the software described within may not be copied, except in the
normal use of the product(s) described within or to make a backup copy.
Copyright© 2011
Aleratec, Inc.
9851 Owensmouth Avenue
Chatsworth, CA 91311 U.S.A.
www.aleratec.com
Aleratec is a registered trademark and DVD/CD RoboRacer LS Duplex
™
is a
trademark of Aleratec, Inc.
Please record the following information to help expedite any warranty
claim:
Model No. _____________________ Serial No. _____________________
Date Purchased ________________________________________________
Place of Purchase ______________________________________________
The DVD/CD RoboRacer LS Duplex Win/Mac duplicator is used only to
backup personal data and to edit personal audio tracks. The copyright of the
duplicated disc made from the DVD/CD RoboRacer LS Duplex Win/Mac
duplicator is belonged to the author or company of the source disc. Any
unauthorized copying, or editing of a copyright disk, in full or part is strictly
prohibited.
NOTE: Please store and track the included software, registration codes
and parts carefully. Requests for replacement software, registration
codes, and/or parts may incur a fee.
www.aleratec.com
Radio/TV Interference Statement
The equipment described in this guide emits radio frequency energy. If it
is not installed in accordance with the manufacturer’s instructions, it may
cause interference with radio or television reception.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instruction manual, this
equipment may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be veried by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an electrical outlet on a circuit that is different
from the circuit to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
This equipment has been certied to comply with the limits for a Class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to
result in interference to radio and TV reception. The user is cautioned that
changes and/or modications made to this equipment, without the approval
of manufacturer, could void the user’s authority to operate this equipment.
www.aleratec.com
Safety Regulations
WARNING
To prevent re or shock hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to authorized personnel only.
CAUTION
As the laser beam in these DVD/CD RoboRacer
LS Duplex Win/Mac is harmful to the eyes, do
not attempt to disassemble the cabinet. Refer
servicing to authorized personnel only.
The use of optical instruments with this product
will increase eye hazard.
This DVD/CD Duplicator is classied as a CLASS
1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located
on top of the internal drive enclosure.
CLASS 1
LASER PRODUCT
LASER KLASSE 1
PRODUKT
www.aleratec.com
Table of Contents
Introduction .......................................................................................1
Product Features .....................................................................................1
Check out Aleratec Online! ....................................................................1
Key Items – DVD/CD RoboRacer LS Duplex Win/Mac .......................2
Precautions .......................................................................................3
Installation ..............................................................................................3
Operation ................................................................................................3
Transportation .........................................................................................3
Overview ............................................................................................4
Hardware Installation Procedure ............................................................4
Software Installation ...............................................................................5
For Mac Users .................................................................................5
For Windows Users .........................................................................5
Getting Started ................................................................................11
Using the RoboRacer LS Duplex Win/Mac .......................................... 11
Using the RoboRacer LS Duplex Win/Mac ...................................12
Creating Image Files ............................................................................. 12
Creating an Image File from a Source Disc .................................. 12
Creating an Image File from Data on your Computer ...................15
Burn from Disc Image .......................................................................... 19
LightScribe Labeling ............................................................................ 21
Burn from Disc Image .......................................................................... 25
Duplication Modes ................................................................................27
Copy Disc ......................................................................................27
Copy Disc + LightScribe Labeling ....................................................... 29
Getting Acquainted with the RoboRacer LS Duplex Utility Software . 31
Recommended Media ...........................................................................33
Glossary ..........................................................................................34
Technical Support ..........................................................................37
Service and Support .......................................................................38
Technical Support FAX Back Form ...............................................41
www.aleratec.com
www.aleratec.com 1
Introduction
Thank you for purchasing the DVD/CD RoboRacer LS Duplex Win/Mac.
Please read this User Guide thoroughly before using this product.
Product Features
The DVD/CD RoboRacer LS Duplex Win/Mac is a versatile robotic desktop
DVD/CD copying and LightScribe printing solution.
• Fully Automatic Disc Publisher
▪ Fully automatic disc handling
▪ 100-disc capacity
▪ Duplicate and LightScribe label simultaneously
▪ Unattended operation
Check out Aleratec Online!
• Blog.Aleratec.com
• Facebook.com/Aleratec
• Twitter.com/Aleratec
• YouTube.com/Aleratec
www.aleratec.com
2
Introduction
Key Items – DVD/CD RoboRacer LS Duplex Win/Mac
A
B
C
1
2
4
5
6
7
3
8
NOTE: Do not pick
up the unit using
these surfaces.
1. Clear Plastic Disc Guide Rods
2. Power and Function Indicator LED
3. LightScribe DVD Recorders
4. Disc Tray Control Arm
5. Disc Input Bin
6. Protective Cover
7. Disc Bin Holder
8. Disc Output Bin
A. High Performance Cooling Fan
B. Power Plug
C. USB 2.0 to the PC
www.aleratec.com 3
Precautions
Before installing your DVD/CD RoboRacer LS Duplex Win/Mac, please
read the following.
Installation
Avoid placing the DVD/CD RoboRacer LS Duplex Win/Mac in a location
subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Operation
Do not move the DVD/CD RoboRacer LS Duplex Win/Mac during
operation. This may cause it to malfunction during operations.
Avoid exposing the duplicator to sudden changes in temperature as
condensation may form on the lens inside the duplicator. Operating the
duplicator immediately after a sudden increase in temperature may result in
a malfunction during playback or writing operations.
NOTE: The DVD/CD RoboRacer LS Duplex Win/Mac must never be cleaned
with a lens cleaning kit!
Transportation
Keep the original packing materials for future moving or shipping of the
DVD/CD RoboRacer LS Duplex Win/Mac.
www.aleratec.com
4
Overview
Hardware Installation Procedure
1. Remove the DVD/CD RoboRacer LS Duplex Win/Mac from the box.
Plug the male end of the power cord into a 110VAC power source.
Plug the female end of the power cord into the back of the DVD/
CD RoboRacer LS Duplex Win/Mac and leave the power switch off,
(power on the device after the software has been installed). Place the
RoboRacer LS Duplex Win/Mac on a level surface.
2. Plug the USB cable into the PC and the DVD/CD RoboRacer LS
Duplex Win/Mac.
3. Remove the colored plastic bases from the three output bins. To do this
you rst must break the two black pins on each base, pushing them in
the direction the arrow on the base points. Save the bases along with
the other packaging foam in the product box in case your unit needs to
be transported.
4. Slide bin holders into the two slots on the left side of the RoboRacer LS
Duplex Win/Mac case and place a disc output bin into each bin holder.
There are two types of output bins included (Two 50-disc capacity, one
100-disc capacity). Make sure to keep the output bins that come with
the 280111. Although a normal disc media spindle cover may work, the
RoboRacer LS Duplex Win/Mac has been designed to use the provided
Disc Output Bins included. When installing, make sure that the anges
on the bin are touching the lip of the bin holder. If the bin is not pushed
down as far as it can go, the edge of the bin could interfere with the
disc output. To use the 100 disc bin in the lower slot, the DVD/CD
RoboRacer LS Duplex Win/Mac should be placed at the edge of a desk
or table. Make sure that the bin does not touch the edge of the desk or
table surface. Also, make sure to not place the 280111 over the edge,
the weight of the discs may result in a fall.
5. Take the clear plastic disc guide rods and place them into the 4 holes
in the top of the unit. To load the discs into the input bin, take one disc
and place it horizontally level in the input bin. Now you can load the
rest of the discs. All of the discs need to be level with the sides of the
stack straight.
Table des matières
Autres manuels Aleratec Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
