AJAX FireProtect 2 Jeweller Manuel utilisateur
1
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
Jeweller
FireProtect 2 ( eat)
Jeweller
Wireless re detector with heat sensor.
Features a built-in siren for alarms
and events notication. Operates as part
of the Ajax system or without pairing
with an Ajax hub.
Find the detailed information
on the device at:
support.ajax.systems/en/manuals/reprotect-2-heat/
The device is available in two versions: with replaceable or sealed batteries. The name
of a detector with replaceable batteries contains the RB mark, and with sealed batteries — SB
FireProtect 2 RB (Heat) Jewelle
FireProtect 2 SB (Heat) Jeweller
Key features
Advanced hardware and software
An interconnected alarm of all re detectors at the facility in 20 second
Built-in siren with a volume of 85 dB at a distance of 3 meters
Ability to operate autonomously without an Ajax hu
10 years of operation with sealed batteries, and up to 7 years — with replaceable batteries
Easy to install and congure
SmartBrac
k
et mounting panel with the ability to align the detector after installatio
R
emote control and conguring via Ajax app
Pairing with the Ajax hub via
QR
code
2
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
Ope ating p inciple
Two built-in thermistors are responsible for the reaction
to temperature rise. Thermistors are located outside
the detector for faster threat detection.
If the room temperature exceeds +64°C or increases
by more than 10°C within a minute, the detector
recognizes this as a rapid temperature rise and raises
the alarm.
Inte connected e detecto s ala ms
The detector supports interconnected re alarms.
The feature activates built-in sirens of all Ajax re
detectors at the facility if at least one of them
is triggered. In case of a re, this allows alerting
as many people as possible.
FireProtect 2 detectors have an improved
interconnected re alarm algorithm that activates all re
detectors' sirens within 20 seconds. The function
is available only when detectors operate with the hub.
Ope ation without a hub
FireProtect 2 detectors can be used
without pairing to an Ajax hub. In this case,
the detector noties re alarms with a built-in
siren and LED indication, and does not send
a notication to the user's smartphone, Ajax
Translator, or PRO Desktop.
3
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
Manual and automatic testing
FireProtect 2 regularly checks the status of batteries and built-in sensors. If a malfunction is detected,
the hub will notify users and the monitoring station instantly. And the detector will turn on the light
and sound alert by the built-in siren and LEDs. All detector states can be checked at any time in Ajax apps.
The detector supports manual testing mode. It is activated by pressing the device's front panel.
The front panel has a mechanical button, which can be pressed either manually or with a oor mop. During
the test, the built-in siren and testing of sensors are run. This allows the installer to test the device at any time
and to demonstrate to the customer the light and sound indication of the detector for various types
of alarms.
Autonomous operation
FireProtect 2 (Heat) is available in two versions:
with replaceable or sealed batteries. Detectors
with replaceable batteries operate for up to 7 years
with pre-installed CR123A batteries. After discharge,
the batteries can be replaced with new ones. The model
with sealed lithium batteries operates for at least 10
years. After the batteries are discharged, the detector
should be replaced with a new one.
Jeweller
communication technology
Jeweller is a radio protocol for fast and reliable two-way communication between hubs and connected
devices. The protocol provides a wireless radio communication range with FireProtect 2 up to 1,700 meters.
This communication range allows you to install detectors even on large-scale objects.
Jeweller is responsible for transmitting alarms and events. The radio protocol also provides an interconnected
re detectors alarm activation within 20 seconds in a system with any number of FireProtect 2.
Thanks to Jeweller, users and the monitoring station can always see the current status of detectors
in Ajax apps.
4
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
Quick pairing and installation
There is no need to disassemble the detector
during installation. With an improved
SmartBracket panel, an installer can effortlessly
x the detector on ceilings and level it at 90°
angles after mounting. The Ajax apps help
quickly make the device a part of the system.
And it can always be recongured remotely
without site visits.
Technical specications
Communication with
the hub or range
extender
Jeweller
communication
technolog
Frequency band
866.0–866.5 MH
868.0–868.6 MH
868.7–869.2 MH
905.0–926.5 MH
915.85–926.5 MH
921.0–922.0 MH
Maximum effective
radiated power (ERP
up to 20 m
Communication rang
up to 1,700
Depends on the region
of sales
In an open space.
Compatibility Hubs
Hub Plus
Hub 2 (2G)
Hub 2 (4G)
Hub 2 Plus
Hub Hybrid (2G)
Hub Hybrid (4G)
Range extenders
ReX
ReX 2
5
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
ompliance with
regulations
EN 54-5:2017+A1:201
Additional features Built-in sire
volume of 85 dB
at a distance of 3 meter
Interconnected re alar
All re detectors
in the system turn
on built-in sirens if at least
one of the detectors
registers an alarm.
LED indicatio
green is a power
indicatio
yellow is an indication
of malfunction
The interconnected alarm
is activated after no more
than 20 seconds
Lights up once every
minute
Lights
up when malfunctions
are detected. For example,
in the case of discharged
batteries.
Heat detection Sensitive elemen
two thermistor
Heat alar
10°C increase
in temperature
within 1 minut
exceeding +64°C
According
to the requirements
for heat A1R- class
detectors of EN 54-5
standard
Anti
-
sa
b
otage
protection
Tam
p
erin
g
alar
P
rotection a
g
ainst
s
p
oon
device authenticatio
Detection
of communication failur
within 15 minute
T
he time to detect
communication loss
depends on the number
of undelivered data
pac
k
ages setting
(
specied
in the
J
eweller or
J
eweller
/
Fibra settings
)
.
T
he polling
interval is xed at 300
seconds
6
Technical Data Sheet: FireProtect 2 (Heat) Jeweller
Additional features red is an indication of re
alarm
Button on the front panel
of the detecto
In normal mode,
when pressed, it starts
the detector test
In the event of an alarm
or malfunction,
the pressing turns
off the detector sound
notication.
Lights
up when the detector
detects a re alarm
Enclosure and
installation
Dimension
43.5 х 86 х 86 m
Weigh
146
142
Operating temperature
rang
from 0°С to +50°
Operating humidit
up to 80
Protection clas
IP2
Colour
Blac
White
For RB version
For SB version
Power supply RB versio
2 replaceable CR123A
batterie
SB versio
2 sealed lithium batterie
U
p to
7y
ears of batter
y
life
10
y
ears of batter
y
life
C
o
m
plete set RB versio
FireProtect 2 RB
(H
eat
)
J
ewelle
SmartBrac
k
et mounting
pane
Installation
k
i
2
CR123A batteries
Q
uic
k
start guid
SB versio
FireProtect 2 SB
(H
eat
)
J
ewelle
SmartBrac
k
et mounting
pane
Installation
k
i
Q
uic
k
start guid
Pre
-
installed
Autres manuels pour FireProtect 2 Jeweller
5
Autres manuels AJAX Capteur de sécurité
AJAX
AJAX MotionCam Jeweller Manuel utilisateur
AJAX
AJAX FireProtect Manuel utilisateur
AJAX
AJAX ReX Manuel utilisateur
AJAX
AJAX FireProtect 2 (Heat) Jeweller Manuel utilisateur
AJAX
AJAX CombiProtect Fibra Manuel utilisateur
AJAX
AJAX FireProtect 2 (CO) Jeweller Manuel utilisateur
AJAX
AJAX GlassProtect Manuel utilisateur
AJAX
AJAX DoorProtect Manuel utilisateur
AJAX
AJAX Fire Protect Manuel utilisateur
AJAX
AJAX FireProtect 2 Manuel utilisateur
AJAX
AJAX DoorProtect Plus Manuel utilisateur
AJAX
AJAX DualCurtain Outdoor Manuel utilisateur
AJAX
AJAX FireProtect 2 Jeweller Manuel utilisateur
AJAX
AJAX GlassProtect Manuel utilisateur
AJAX
AJAX LifeQuality Jeweller Manuel utilisateur
AJAX
AJAX FireProtect 2 (Heat) Jeweller Manuel utilisateur
AJAX
AJAX GlassProtect Manuel utilisateur
AJAX
AJAX DoorProtect Manuel utilisateur
AJAX
AJAX DoorProtect Plus Manuel utilisateur
AJAX
AJAX LeaksProtect Manuel utilisateur
