Airwallet anton Guide de démarrage rapide
1Airwallet ANTON
Technical guide
TECHNICAL GUIDE
CONTACT US
PHONE: (+45) 7870 9999
MAIL: CONTACT@AIRWALLET.NET
Technical guide
Airwallet ANTON
Contents
I. Getting Started 1
The Airwallet Network 2
II. Prior to Installing the Anton 4
Set up Anton on the Airwallet Dashboard 4
III. Installation 6
A. Find a suitable spot for Anton 6
B. Install and power up the Anton 7
C. Anton optimization 7
IV. Tips and Troubleshooting 10
V. Learning More, Service, and Support 12
VI. AntonSpecications 13
General Specications 13
Environmental Specications 13
Product Safety 13
VII. Safety Instructions 15
VIII. Declaration of Conformity 16
IX. Disposal and Recycling Information 17
1Airwallet ANTON
Technical guide
I. Getting started
1. Touch screen
2. On/off/reset button on the tablet
3. Area for contactless payments
4. Lock
5. PIN pad
6. Card entrance for chip payments
7. Wall-mount
8. Secure payment terminal
9. Serial number
2
Airwallet ANTON
Technical guide
Every Anton comes with a small bag containing two keys for the
lock, four screws, and plugs to install the Anton on the wall in your
laundromat. Please carefully consider who should have the keys
and store them safely (e.g. the installer, laundry owner, or the
janitor).
The Airwallet Network
The following illustration depicts an Anton installed at a location
alongside an Airwallet PRO connected to a commercial laundry
machine:
The machine supplies power to the Airwallet PRO, enabling it to
send start signals and monitor the machine’s status, as well as all
information about the user payments.
ANTON
WASHER
DASHBOARD
THE APP
PRO BOX
Cellular network
or Wi-Fi
Cellular network
or Wi-Fi
Bluetooth
4.2
Bluetooth
4.2
3Airwallet ANTON
Technical guide
The Airwallet Pro is linked to the Airwallet Dashboard, which stores
information about all devices within the Airwallet network. The
Airwallet PRO receives data from the Airwallet Dashboard through
the Anton via mobile communication or Wi-Fi. The Anton connects
to the Airwallet PRO via Bluetooth 4.2.
On the Anton, users can select an available machine, choose a
desired service, and make a payment using their payment card.
Once the payment is complete, the Anton instructs the Airwallet
PRO to start the machine.
Anton is designed as an extension to The Airwallet Payment App
and can be used in conjunction with it or independently. Anton
respects orders and bookings made through the Airwallet app,
and vice versa. In laundries without Anton, all communication
is facilitated through the user’s phone, which connects to the
Airwallet PRO via Bluetooth and to the Dashboard through Wi-Fi or
mobile communication.
4
Airwallet ANTON
Technical guide
II. Prior to installing the Anton
When you are considering the use of Anton at a particular
laundromat location, it’s advisable to test the internet connection
during your rst visit. You can make a speed test on your phone
using www.speedtest.net to check the network quality. If you
suspect a poor connection, you may consider if the Anton can be
connected to a Wi-Fi network instead. The speed test must achieve
a minimum of 8 Mbps or higher.
Additionally, please ensure that there is no timer on the power
supply (for instance, one that turns off at night), as the Anton
requires a continuous power supply.
Set up Anton on the Airwallet Dashboard
Before the Anton is given to the installer to be installed in the
laundromat it must be set up on the dashboard.
OBS: If this is your rst installation, ensure that the ‘Bank account
details’, ‘Stripe KYC’, and ‘Billing’ ow is complete before continuing.
It is located on the ‘Overview’ page on the dashboard.
1. To set up Anton on the dashboard, log into admin.airwallet.net.
2. Once in the Dashboard, click on the ‘Locations’ button in the
menu.
3. When in the specic location, click on the ‘Create terminal’
button.
4. Fill in the Serial Number, which can be found on the backside
5Airwallet ANTON
Technical guide
of the Anton or on the Anton packaging. Alternatively, if the
Anton is already installed on the wall, you can nd it on the
smaller screen of the payment terminal by clicking the on/off
button on the PIN pad.
5. Select the default language in which Anton is desired to
operate and click ‘Create terminal’.
6. Now, Anton is created on the dashboard.
7. Finally activate the Anton by choosing a subscription plan on
the ‘Billing’ page, which can be found in the ‘Settings’ drop-
down menu.
It is possible for the installer to test the installation through the app
before the AWPRO devices are activated on the billing page on the
Airwallet dashboard. This requires the installer to be a test-user
in the app. Contact Airwallet support if this is needed at contact@
airwallet.net or +45 7870 9999.
While it is possible to test it with the app prior to activating the
AWPRO devices, it is not possible to test the Anton until all the
AWPRO devices and the Anton, are activated on the billing page.
Furthermore, it is not possible for an installer to perform a test
transaction without an actual money transfer.
6
Airwallet ANTON
Technical guide
III. Installation
Please note that the Anton will arrive with a low battery. It does not
charge quickly, so do not wait until the last moment to plug it in for
testing. Allow at least 10 minutes of charging before attempting to
power it up.
There is a key located inside the Anton when you receive it. Make
sure to bring the key, if the Anton has been unpacked prior to the
installation.
A. Find a suitable spot for Anton
Use the following guidelines to nd the best spot to mount the
Anton to get the best performance and user experience:
1. Position the Anton within 20 meters of the machines. The
closer the better.
2. Perform a speed test on your phone at www.speedtest.net at
the intended installation spot for the Anton. Check multiple
spots to nd the best connection. The speed must be 8 Mbps
or higher to guarantee a satisfying user experience.
3. Ensure that the Anton is not placed directly next to any
machines or windows to protect it from water damage.
Additionally, make sure it will not be exposed to direct
sunlight at any time during the day to prevent overheating.
4. Position the Anton so that the right side is not blocked by any
object to ensure access to the power button. Make sure there
is at least 20 cm of space around Anton.
5. Make sure the Anton has constant power, and that the
electricity is not turned off during the night.
7Airwallet ANTON
Technical guide
B. Install and power up the Anton
1. Unbox the Anton and locate the metal keys in the package
together with the screws and rawplugs.
2. Use the key to unlock the metal ‘wall-mount’ from the Anton,
and then install the wall-mount on the wall using the provided
screws and rawplugs.
3. Connect the Anton to power by supplying a line and neutral to
the charger located on the backside of the terminal. Ensure
that the power is disconnected before proceeding.
4. Power up the Anton by pressing and holding the power button
for 3 seconds. Notice that it requires approximately 10
minutes of charging before it can be powered up.
5. Once powered up, press ‘start’ on the Anton.
6. Press ‘Activate’, if you are asked to ‘Activate device admin
app’.
7. Press ‘I’m in the laundry’, and Anton will search for Airwallet
boxes that are congured and powered on.
8. Select your Laundry and test your installation by making a
transaction.
You are now done setting up Anton!
C. Anton optimization
Below is a ‘best practice’ guide to ensure that the Anton has the
best possible connection to provide the user with an optimal
experience.
Check the internet speed on the Anton (and not just your phone
as done during the Anton installation) and consider changing the
8
Airwallet ANTON
Technical guide
mobile operator if necessary. Do so by following the steps below:
1. Press and hold the on/off button on the right side of Anton.
2. Two options will appear. Select the one labeled ‘ProKiosk
mode’.
3. To exit the ProKiosk mode you will need to enter the ProKiosk
mode code. If you don’t have the code please contact
Airwallet’s support at contact@airwallet.net or +45 7870 9999.
4. Check the internet connection at the location using Anton.
Open the ‘Google Chrome’ app on the tablet and enter:
www.speedtest.net
5. Now perform the speed test. The speed must be higher than 8
Mbps to guarantee a satisfying user experience.
If your test is lower than the recommended target select another
Network Operator:
ÉGo into ‘Settings’
ÉClick on ‘Connections’ ( 1)
É‘Mobile Networks’ ( 2)
É‘Network Operators’ ( 3)
ÉTurn off ‘Select automatically’ and let it load for 5-20 seconds.
Choose the preferred Network Operator from the options. ( 4)
1
2
3
4
Table des matières
Autres manuels Airwallet Terminal de paiement
Manuels Terminal de paiement populaires d'autres marques
Ingenico
Ingenico iWL250B Manuel utilisateur
Optimum
Optimum M4230 Manuel utilisateur
Triton
Triton RL5000 Manuel utilisateur
Ingenico group
Ingenico group Lane/8000 Manuel utilisateur
Gilbarco
Gilbarco FlexPay IV CRIND Manuel d'installation et d'exploitation
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Manuel utilisateur
