AIO ZEUS Manuel utilisateur
ZEUS
QUICK-START GUIDE
Getting started
1Cut straps 3Lift box + remove packaging
2Remove all four plastic tabs
Insert power cable in back, switch on 9Unwrap lament and feed through tube
8Press front on button for 1 second
Open door by lifting up and back 6Place turnable 3 pins facing down
5Remove interior packaging
4
7
Remove
test printout
10 Wind excess back onto spool 12 Press park button
11 Press control button
Select a le 18 Lift glass plate then remove printout
17 Select print
Feed lament all the way down 15 Press print to access les
14 Prep plate with thin layer of glue
13
16
Squeeze tabs with
thumb and index
NB: “Box” test le print time:
> 8 mins
A
4
Recommended: start with a test
Included Accessories
Filament Scanner Calibration Pattern Scan powder + applicator Spatula (printout remover)
Glue Stick Wi dongle Power supply Turn table
B
Connecting ZEUS to the web
Insert wi dongle Optional:ethernet Select WIFI icon Select your local
wireless network.
Enter password.
C
A. Wi is connected
B. Ethernet is
connected (defaults
to ethernet if
connected)
AB
USB 3Ethernet
2Wi
1
NB: “Box” test le print time:
> 8 mins
When ZEUS is off line
File Transfer Options (refer to manual for details)D
For le transfer via wi or ethernet, enter IP address (A or B) in computer browser to access Pydio. Login: aio Password: aiorobotics
Home Control System menu
Print Scan Copy Fax
ZEUS UI - the basicsE
Online settings
Table des matières
Autres manuels AIO Imprimante 3D
