AG Neovo DR-17 Manuel utilisateur
1
Table of Contents
Precautions............................................................................................................... 2
Warning on installation .................................................................................... 2
Warning on power connection ......................................................................... 2
Warning on tilt ................................................................................................. 3
Warning on Maintenance................................................................................. 3
Warning on transportation ............................................................................... 3
Getting Started.......................................................................................................... 4
Package Contents ........................................................................................... 4
Identify the Parts and Controls ........................................................................ 5
Setup............................................................................................................... 8
Customising Your Display ....................................................................................... 10
Adjusting Your LCD Panel ............................................................................. 10
Selecting OSD Features................................................................................ 10
OSD Menus................................................................................................... 11
Warning Messages and Troubleshooting................................................................ 17
Warning Messages........................................................................................ 17
Troubleshooting............................................................................................. 18
Technical Specifications.......................................................................................... 19
Specifications ................................................................................................ 19
Regulation............................................................................................................... 20
FCC compliance............................................................................................ 20
WEEE............................................................................................................ 20
Hg.................................................................................................................. 21
Medical Product ............................................................................................ 21
2
Precautions
Warning on installation
yDo not cover or block the ventilation holes in the case.
yDo not install the display near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
Warning on power connection
yUse an appropriate power cord for your local power supply.
yThe outlet should be installed near the display and be easily accessible.
yDo not allow anything to rest on the power cord.
yDisconnect the power plug from the power outlet under following conditions:
If you will not use it for an indefinite period time.
When the power cord or plug is damaged of frayed.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicate a need for service.
Remark: Please be advised that IEC 60601-1 certification is only applicable when using DR-17
together with the 24V adapter that supplied by AG Neovo. If you use any adapter other than
24V adapter that was supplied with DR-17, then IEC 60601-1 certification will not be applicable.
Warning on tilt
Use the display’s tilt capability to adjust its vertical orientation to an appropriate position. Grasp
the top corners of the display with both hands and tilt to the desired angle.
DR-17
Warning on Maintenance
yClean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such
as alcohol or benzene.
yDo not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a
pen or screwdriver. This type of contact may result in a scratched glass.
yDo not insert sharp objects or spill liquid into the display through ventilation holes. They
may cause accident fire, electric shock or failure.
yDo not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage potentials or other risks.
Warning on transportation
yWhen you transport this display for repair or shipment, use the original carton and packing
materials.
3
4
Getting Started
Package Contents
Before using this display, check the following items are included in your carton box:
yDisplay (*1)
yX-ray film positioner (*1) with its rivets (*3)
yDC 24V Power adaptor (*1)
1. Please use the power adapter which provided by the manufacturer.
2. Do not use power adapters on DC 12V.
3. Must use one of the following adapter: Sinpro MPU63-108.
yPower cord (*1) (Above 0.75mm * 3C)
yD-sub 15-pin signal cable (*1)
yDigital DVI signal cable (*1)
yS- Video cable (*1)
yCVBS cable (*1)
yCD-ROM (*1)
yQuick Guide (*1)
Identify the Parts and Controls
yEquipotential Terminal
Brings the various parts of a system to the same potential.
yDigital-In
DVI-D connector for digital signal input.
yVGA-In
D-sub 15-pin connector for VGA signal.
yCVBS-In
Connector for CVBS signal.
yS-VIDEO-In
Connector for S-Video signal.
yDC 24V Power in
Provides 24V DC power to the display.
5
6
Up Button
1. Activate the On-Screen Display menu.
2. While the On-Screen Display menu appears, press to move the
selected item clockwise or onward.
INPUT / Down Button
1. While the On-Screen Display menu appears, press to move the
selected item counterclockwise or backward.
Increase Button
1. When the On-Screen Display menu is activated, press to confirm/ enter
the selected items.
2. When the On-Screen Display menu is activated, press to increase the
adjustable value of the selected item.
Decrease Button
1. When the On-Screen Display menu is activated, press to confirm/ enter
the selected item.
2. When the On-Screen Display menu is activated, press to decrease the
adjustable value of the selected item.
7
Auto Button / Video Mode
1. Press to select the preferred video mode: User, Text, Movie, Game or
Graphic. The option will toggle on the top right hand corner of the display.
2. Press for 3 seconds to adjust the picture position and performance
automatically for optimal settings. You are recommended to press the
button the first time you use the display or every time you change the
resolution and/or refresh rate of the input signal.
3. When the On-Screen Display menu is activated, press to exit the menu
at any time.
Power Switch
Turns the display on or off.
LED Indicator
Indicates the display’s operational mode; green for regular operation, and
amber for power saving mode.
Hot Key Input Select Hot key
Pressing and buttons at the same time for 5 seconds can switch
between auto and manual input select.
When the input select is under manual mode, press to choose the desired
input signal: D-sub, DVI, CVBS or S-Video. The option will toggle on the top
right hand corner of the display.
Illuminator Function Hot Key
Press and hold “ ”button for 3 seconds to turn the screen to completely white
screen to enable you to use the screen as the light box for the x-ray film. To
change the screen back to normal display mode, simply press and hold “ ”
button again for 3 seconds.
Setup
Please follow the following instructions to setup display.
Step 1: Remove all packing materials and wrapping from the display and then tear down
the plastic dust cover from the screen surface.
Step 2: With the computer or video equipment turned off, connect the enclosed VGA
signal cable.
yConnecting to an IBM or IBM compatible computer
yConnecting to a video equipment with digital source
yConnecting to a video equipment with S-Video connector
8
9
yConnecting to a video equipment with CVBS jack
Step 3: With the display turned off, connect the display end power plug of adaptor to the
power jack of the display. Then connect the power cord to the adaptor and the
power plug to the power source.
Step 4: Turn on your computer or video equipment. Press power switch to turn on
display.
Step 5: For best performance. (If the display is connected to a video equipment such as
DVD or VCR player, please skip this step.)
For DR-17 LCD display, it will have the best performance at resolution 1280 x
1024. Ensure that your computer display is set at 1280 x 1024 pixels and 60Hz.
Press the AUTO button. The display will optimise the display automatically.
Installing the X-Ray Film Positioner on Your LCD Panel:
1. Place the x-ray film positioner on the top of the LCD
panel. Align it so that the three positioner’s holes are
on the top of the LCD panel’s ventilation holes as
shown in the illustration.
Be sure that the longer edge of the positioner is placed
at the front side of the LCD panel.
2. Insert the 3 rivets into the positioner’s holes and pass
through the LCD panel’s ventilation holes to secure it.
3. To view the x-ray film image,
attach the x-ray film on the
positioner.
Autres manuels pour DR-17
4
Table des matières
Autres manuels AG Neovo Moniteur
AG Neovo
AG Neovo DR-17E Manuel utilisateur
AG Neovo
AG Neovo ER-191 Manuel utilisateur
AG Neovo
AG Neovo M-17 Manuel utilisateur
AG Neovo
AG Neovo HX-Series Manuel utilisateur
AG Neovo
AG Neovo DR-17P Manuel utilisateur
AG Neovo
AG Neovo RX-55 Manuel utilisateur
AG Neovo
AG Neovo U-17 Manuel utilisateur
AG Neovo
AG Neovo HX-42 Manuel utilisateur
AG Neovo
AG Neovo X-22 Manuel utilisateur
AG Neovo
AG Neovo SX-15 Manuel utilisateur
AG Neovo
AG Neovo LA-22 Manuel utilisateur
AG Neovo
AG Neovo FM-27 Manuel utilisateur
AG Neovo
AG Neovo SC-19E Manuel utilisateur
AG Neovo
AG Neovo F-17 Manuel utilisateur
AG Neovo
AG Neovo S-15E Manuel utilisateur
AG Neovo
AG Neovo M-19 Manuel utilisateur
AG Neovo
AG Neovo C-19 Manuel utilisateur
AG Neovo
AG Neovo TM-23 Manuel utilisateur
AG Neovo
AG Neovo 17" LCD Display E-17B Manuel utilisateur
AG Neovo
AG Neovo TX-10 Manuel utilisateur
