AFL FOCIS Flex Manuel utilisateur

FOCIS Flex

Fiber Optic Connector Inspection System

Quick Reference Guide

www.AFLglobal.com or (800) 321-5298, (603) 528-7780

Test & Inspection

Controls, Display, Interfaces

Controls

1 Power key -

2 Image Capture key -

3 F1 soft key (typically Back function)

4 F2 soft key (typically Select function)

5 Navigation and Edit functional keys

Display (2-inch Color LCD [320 x 240])

6 Screen title

7 Battery status icon

8 Image and information display area

9 F1 and F2 soft key labels area

Interfaces

10 Optical inspection port

11 Adapter tip

12 Dust cover

13 Micro-USB port

14 5 VDC input jack

15 Charging indicator

Properly Installing and Removing Adapter Tips

Note: Contact AFL Sales Representative or Tech

Support for additional connector adapter tips.

Installing Adapter Tips

• While holding adapter tip in place, raise

captive nut Auntil it engages with adapter

tip threads.

• Turn captive nut counter-clockwise

(viewed from front/top).

• Hand-tighten (do not over-tighten).

Removing Adapter Tips

Probe tips are held in place with

a captive nut A.

• Turn captive nut clockwise

(viewed from front/top).

• Continue until captive nut is free of adapter tip.

• Remove adapter tip by pulling it gently straight

off the probe base.

Note: For proper viewing, APC connectors must

be aligned with the slot Bin the threaded area

of the correct APC adapter tip.

FOCIS Flex is available with the following adapter tips

Connector

UPC Connectors APC Connectors

Ferrule Bulkhead Ferrule Bulkhead

SC FFLX-01-U25 FFLX-01-SC FFLX-01-A25 FFLX-01-ASC

FC FFLX-01-U25 FFLX-01-FC FFLX-01-A25 FFLX-01-AFC

LC FFLX-01-U125 FFLX-01-LC FFLX-01-A125 FFLX-01-ALC

ST FFLX-01-U25 FFLX-01-ST Not applicable Not applicable

Tighten

Loosen

Powering Up/Down

Battery Charging and Operation

Power-Up

• Press and release the Power key A.

Power-Down

• Press and hold the Power key Auntil

display turns off.

Congure FOCIS Flex to Auto-Off

• From the Main Menu > Settings,

select Display & Power Save option.

• Select desired power save option:

2 min, 5 min, 10 min, Never.

• Plug the included AC Charger into AC outlet.

• Connect charger plug into 5 VDC jack Bon FOCIS Flex.

• LED Cindicates charging status as follows:

–OFF - AC not connected

–RED - Charging battery

–GREEN - Fully charged

–RED/GREEN ashing - Charging error.

Verify correct 5VDC 2A charger is used. Allow to cool

before charging.

• FOCIS Flex charges while operating.

• Battery icon Dindicates battery state as follows:

- AC connected; charging, not fully charged

- AC connected; charging, fully charged

- Battery operation, fully charged

- Battery operation, partially charged

- <15 min Battery operating time remaining

Live Image Mode

FOCIS Flex powers-up in the Live Image mode.

• Pressing and holding the Help soft key A

displays help tips about FOCIS Flex keys usage.

Note: pressing the Left arrow key toggles

between connector types:

–Single (single ber connector, UPC or APC)

–MPO-PC/APC (MPO/MTP®multi-ber

connector; PC or APC nish)

–MPO-Flat (MPO/MTP multi-ber connector; Flat

nish [rare])

• Pressing the Menu soft key Bdisplays the

Main Menu that allows the user to set preferences,

perform general settings, manage saved test results

and perform other non-test functions.

• Pressing Menu > Setting C> Capture Ddisplays

the Capture settings menu.

• When the Auto Focus option is enabled Ein the

Capture screen and Capture key is pressed:

–Auto focus is initiated

–Image is captured when auto focus completes

–Image is analyzed if Pass/Fail set to On

–FOCIS Flex transitions to Captured Image mode

• When Auto Focus is enabled or disabled:

–Press Right arrow key to auto focus once

–Press Up/Down arrow keys to manually

adjust focus

• When the Auto Focus option is disabled Fin the

Setting screen and Capture key is pressed:

–Image is captured (without adjusting focus)

–Image is analyzed if Pass/Fail set to On

–FOCIS Flex transitions to Captured Image mode

User Settings and Controls

The Main Menu is accessed from Live Image mode by pressing the Menu soft key.

• While in the Main Menu, press Up/Down arrow keys to navigate and select

(highlight) the desired menu option.

–Settings: Congure Auto Focus, Pass/Fail, Bluetooth, etc.

–Results Manager: Navigate and Review or Send saved test results

–Last Image: Recall most recently viewed image

–WiFi: Congure WiFi for remote access (future)

–Device Info: View serial number, software rev, etc.

• Press Select or Right arrow key to display the selected option sub-screen.

• While in a sub-screen, press Up/Down arrow keys to navigate and highlight

the desired option.

–Press Select soft key or Right arrow key to edit highlighted parameter

–When selected parameter displays On/Off icon / , press Select to

enable/disable

• Press Back soft key to return to the previous menu screen.

Capture Key Operation

• In the Live Image mode, press the Capture key to perform the following:

–Auto Focus image (if the Auto Focus option is enabled)

–Capture the displayed image and enter the Captured Image mode

–Analyze image (if the Pass/Fail option is enabled)

–Save results and send image to Bluetooth-paired device (if auto-save and

auto-send enabled on “1st Capture Key”, see page 12 for details)

–If auto-save or auto-send enabled on “2nd Capture Key” (see page 12),

press the Capture key again to save and/or send

• In Captured Image mode, press the Capture key to return to Live Image mode.

• In the Main Menu or Settings modes, press the Capture key to return to the most

recent Live or Captured Image mode.

Pass/Fail menu is accessed from the Live Image mode > Main Menu > Settings.

Enable/disable Auto Analysis

• Highlight Auto Analysis A.

• Use Select key Bto enable/disable /Pass/Fail analysis.

Change Rule:

• Highlight Change Rule C.

• Press Select or Right arrow key to display a list of the available Rules D.

• Use Up/Down arrow keys to highlight the desired Rule group E.

• Press Select or Right arrow key to display a sub-list F.

• Use Up/Down arrow keys to highlight the desired rule.

• Press Use Gto apply the selected Rule in Pass/Fail analysis.

Pass/Fail Settings

View Rule

1. Highlight View Rule H.

2. Press Select or Right

arrow key to view details for

the current rule.

3. User Rules may be edited

while viewing.

Captured Image Mode Features

# Description

1 Screen Title: displays File Name (e.g. COO1-003) if saved image is shown

or Captured @ hh:mm:ss if unsaved image is shown.

2 Pass/Fail Indication: shown only if Pass/Fail option is enabled in Settings.

3 Display Tabs: select the desired view using the Left/Right ◄arrow keys.

4 End-face Image: displays end-face image with Pass/Fail overlay (if enabled).

5 Back soft key: press to return to previous screen.

6 Image Layers soft key: use Up/Down keys to view image layers as follows,

• End-face image with overlay layer shown (default view)

• End-face image only

• Overlay only

7 Menu soft key: press to display the Save/Send Menu.

Zoomed in end-face image with Overlay

- Zoomed Out Image

- Partially Zoomed In Image

- Fully Zoomed In Image

- Pass/Fail Results Table

- Image Information

Failing scratches/defects

highlighted in RED

Passing scratches/defects

highlighted in GREEN

Captured Image - Pass/Fail Results Table

# Description

1 Screen Title: displays File Name (e.g. COO1-003) if saved image is shown

or Captured @ hh:mm:ss if unsaved image is shown.

2 Pass/Fail Indication: shown only if Pass/Fail option is enabled in Settings.

3 Display Tabs with the Pass/Fail display tab selected.

4 Analysis Rule applied to determine Pass/Fail.

5 Analysis Zones: A - core, B - cladding, C - adhesive, D - contact area.

6 Scratch analysis results for each zone:

• Reports the number of detected scratches exceeding limit for each region

• Highlights failed rules in RED

7 Defect analysis results for each zone:

• Reports the number of detected defects exceeding limit for each region

• Highlights failed rules in RED

8 Back soft key: press to return to previous screen.

9 Menu soft key: press to display the Save/Send Menu.

Saving Captured Images

To save results to the current folder

• While in the Captured Image mode, press the Menu soft

key to display the Save/Send screen.

• Highlight Save Aand press Select soft key to save image

and results to the current folder.

To edit le name

• While in the Save/Send screen, using Up/Down keys,

navigate to the desired parameter: Job, Cable End, Cable,

Pair Mode, Pair Type, or Fiber.

• Press Select or Right arrow key to display Editor B.

• Use arrow keys to edit text eld C.

• Press Ok soft key to save new name D.

To save results to an existing folder

• Highlight the Existing folders Eoption.

• Press Select or Right arrow key to display a list of existing

folders.

• Use Up/Down arrow keys to select desired Job folder F.

• Press Right arrow key to open selected Job folder.

–Repeat for desired Cable folder and Fiber number as needed.

• Press Use soft key Gto conrm selection.

• When back in the Save/Send screen, highlight Save Hand press Select.

Autres manuels pour FOCIS Flex

Table des matières

Autres manuels AFL Instrument de mesure

AFL

AFL Noyes OFS 300 Manuel utilisateur

AFL

AFL Noyes CSS1 Series Manuel utilisateur

AFL

AFL NOYES OFL280-10x Manuel utilisateur

AFL

AFL OFL250 Manuel utilisateur

AFL

AFL Noyes OPM5 OLS 2 D Manuel utilisateur

AFL

AFL FlexScan FS300 Manuel utilisateur

AFL

AFL FS300-325 Manuel utilisateur

AFL

AFL OFL280 FlexTester Manuel utilisateur

AFL

AFL VFI2 Manuel utilisateur

AFL

AFL DFS1 Manuel utilisateur

AFL

AFL NOYES OPM5 -4D Manuel utilisateur

AFL

AFL OPM1 Series Manuel utilisateur

AFL

AFL Noyes OPM 4 OLS 2D Manuel utilisateur

AFL

AFL NOYES OPM Series Manuel utilisateur

AFL

AFL M310 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur