Advantech PPC-120 Manuel utilisateur

PPC-120/140

Pentium®MMX processor-based

panel PC with 12.1"/13.8" LCD

flat panel display

This document is copyrighted, 1998, by Advantech Co. Ltd. All rights are

reserved. Advantech Co., Ltd. reserves the right to alter the products

described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech. Information provided in this manual is intended

to be accurate and reliable. However, Advantech assumes no responsibility

for use of this manual, nor for any infringements upon the rights of third

parties which may result from such use.

All brand and product names mentioned herein are trademarks or

registered trademarks of their respective holders.

Part No. 2002012010

2nd Edition Printed in Taiwan August 1998

iii

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This

equipment generates, uses and can radiate radio frequency energy. If not

installed and used in accordance with this user's manual, it may cause

harmful interference to radio communications. Note that even when this

equipment is installed and used in accordance with this user's manual,

there is still no guarantee that interference will not occur. If this

equipment is believed to be causing harmful interference to radio or

television reception, this can be determined by turning the equipment on

and off. If interference is occurring, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning: Any changes or modifications made to the equipment

which are not expressly approved by the relevant

standards authority could void your authority to operate

theequipment.

Packing List

Before installing your panel PC, ensure that the following materials have

been received:

• PPC-120/140 series panel PC

• User's manual

• Accessories for PPC-120/140

- Y-shaped adapter for PS/2 mouse and AT keyboard

- Power cord (1.8 m) - USA type (other types are available on request)

- Floppy disk with CD-ROM drive driver

- "PPC-120/140 Drivers and Utilities" CD-ROM disc

- Mounting kits and packet of screws

- "Touchscreen Drivers" CD-ROM disc (refer to Note 1)

- Heat sink with CPU fan (optional) (refer to Notes 2 and 3)

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Note 1: (a) The "Touchscreen Drivers" CD-ROM only comes

with panel PCs equipped with the touchscreen function.

(b) To save on resources, Advantech plans to copy the

touchscreen drivers onto the "PPC-120/140 Drivers and

Utilities" CD-ROM disc shortly.

you cannot find the "Touchscreen Drivers" CD-ROM

disc in your package, then please check the contents of

your "PPC-120/140 Drivers and Utilities" CD-ROM disc.

The touchscreen drivers should be located there.

Note 2: If the unit you have bought is basic (i.e.without a CPU,

HDD, or SDRAM), you will find this optional item in the

accessory box.

Note 3: If you install an Intel Pentium

MMX processor yourself,

you must install a heat sink with a CPU fan above the

CPU.This procedure will avoid heat damage to the

CPU.

Additional Information and Assistance

1. Visit the Advantech Web sites at www.advantech.com or

www.advantech.com.tw where you can find the latest information

about the product.

2. Contact your distributor, sales representative, or Advantech's custom-

er service center for technical support if you need additional assis-

tance. Please have the following information ready before you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.

Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to

the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

-20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIP-

MENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

vii

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht

zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor

überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt

werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann.

Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es

vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine

Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten

in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag

auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen

und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioni

ert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims

all responsibility for the accuracy of any statements contained herein.

viii

Contents

Chapters

1 General Information 1

1.1 Introduction...................................................................2

1.2 How to Use This Manual...............................................4

1.3 Specifications................................................................6

General ......................................................................................... 6

Standard PC functions................................................................... 6

PCI SVGA/flat panel interface ....................................................... 7

Audio function................................................................................ 7

PCI bus Ethernet interface ............................................................ 7

Touchscreen (optional).................................................................. 8

Optional modules .......................................................................... 8

Environment .................................................................................. 9

1.4 Dimensions .................................................................10

2 System Setup 11

2.1 A Quick Tour of the Panel PC.....................................12

2.2 Preparing For First-time Use.......................................15

2.3 Installation Procedures ...............................................16

2.3.1 Connecting the power cord................................................. 16

2.3.2 Connecting the keyboard and mouse .................................17

2.3.3 Switching on the power....................................................... 17

2.4 Running the BIOS Setup Program..............................18

2.5 Installing System Software .........................................19

2.6 Installing the Drivers ...................................................19

3 Using the Panel PC 21

3.1 Introduction.................................................................22

3.2 Floppy Drive................................................................22

3.3 CD-ROM Drive............................................................23

3.4 PCMCIA......................................................................24

3.5 PS/2 Mouse and Keyboard.........................................27

3.6 PCI/ISA Bus Expansion ..............................................27

3.7 Parallel Port ................................................................29

3.8 Serial COM Ports........................................................29

3.9 VGA Port.....................................................................30

3.10 Game Port ..................................................................30

3.11 USB Ports ...................................................................30

3.12 Audio Interface............................................................31

3.13 Ethernet ......................................................................31

3.14 Adjusting the LCD Contrast and Brightness ...............31

3.15 Infrared Module...........................................................32

3.16 Touchscreen (Optional) ..............................................32

4 Hardware Installation and Upgrading 33

4.1 Overview of Hardware Installation and Upgrading......34

4.2 Disassembling the Panel PC ......................................35

4.3 Installing the 2.5" Hard Disk Drive (HDD) ...................37

4.4 Installing the Central Processing Unit (CPU) ..............38

4.5 Installing the SDRAM Memory Module.......................40

4.6 Installing the Floppy Disk Drive (FDD)........................41

4.7 Installing the CD-ROM Drive.......................................42

5 Jumper Settings and Connectors 43

5.1 Jumpers and Connectors............................................44

5.1.1 Setting jumpers...................................................................44

5.1.2 Jumpers..............................................................................45

5.1.3 Locating jumpers ................................................................ 46

5.1.4 Connectors .........................................................................47

5.1.5 Locating connectors ........................................................... 48

5.2 CPU Installation and Upgrading .................................49

5.2.1 System clock setting (JP11, JP8) .......................................49

5.2.2 CPU core voltage setting (JP13) ........................................51

5.2.3 CPU frequency ratio setting (JP14) ....................................54

5.2.4 CMOS clear for external RTC (JP12) .................................56

5.2.5 Cyrix linear mode enable (JP10).........................................56

5.2.6 Reset system (JP16) .......................................................... 57

5.3 COM-port Interface .....................................................58

5.3.1 COM2 RS-232/422/485 setting (JP3, JP4, JP5) .................58

5.3.2 COM3/COM4/RI pin setting (JP2, JP1) (Reserved)............ 59

5.4 VGA Interface .............................................................60

5.4.1 LCD panel VCC power setting (JP6) ..................................... 60

5.4.2 Panel type select (JP9).......................................................61

5.5 Watchdog Timer Configuration ...................................63

5.5.1 Watchdog activity selection (JP15) .....................................63

6 PCI Bus Ethernet Interface 65

6.1 Introduction.................................................................66

6.2 Installation of Ethernet Driver .....................................66

6.2.1 Installation for MS-DOS & WINDOWS 3.1..........................67

6.2.2 Installation for WINDOWS 95 ............................................. 68

6.2.3 Installation for WINDOWS NT............................................. 70

6.3 Further Information .....................................................72

7 PCI SVGA Setup 73

7.1 Introduction.................................................................74

Chipset ........................................................................................ 74

Display memory...........................................................................74

Display types...............................................................................74

7.2 Installation of SVGA driver..........................................75

7.2.1 Installation for Windows 3.1 ................................................76

7.2.2 Installation for Windows 95 .................................................78

7.2.3 Installation for Windows NT ................................................81

7.2.4 Installation for OS/2 ............................................................ 84

7.3 Further Information .....................................................86

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Écran tactile

Advantech

Advantech PPC-150T-RT Manuel utilisateur

Advantech

Advantech PPC-150 Series Manuel utilisateur

Advantech

Advantech COASTIPC PPC-412 Manuel d'installation et d'exploitation

Advantech

Advantech TPC-1261H Manuel utilisateur

Advantech

Advantech PPC-L157T Manuel utilisateur

Advantech

Advantech UTC-W101E Manuel utilisateur

Advantech

Advantech PPC-112W Manuel utilisateur

Advantech

Advantech PPC Series Manuel utilisateur

Advantech

Advantech PPC-L128T Manuel utilisateur

Advantech

Advantech SPC-821-6 Series Manuel utilisateur

Advantech

Advantech PPC-3211SW Manuel d'installation et d'exploitation

Advantech

Advantech TPC-1581WP Manuel utilisateur

Advantech

Advantech PPC-306 EHL Manuel d'installation et d'exploitation

Advantech

Advantech PPC-3211SW Manuel utilisateur

Advantech

Advantech PPC-153 Manuel utilisateur

Advantech

Advantech TPC-1070 Manuel utilisateur

Advantech

Advantech PPC-306 EHL Manuel utilisateur

Advantech

Advantech PPC-6120 Manuel utilisateur

Advantech

Advantech PCM-3335 Manuel utilisateur

Advantech

Advantech PPC-310W EHL Manuel utilisateur

Advantech

Advantech PPC-100 Manuel utilisateur

Advantech

Advantech PPC-321W TGL Manuel utilisateur

Advantech

Advantech PPC-L61T Manuel utilisateur

Advantech

Advantech PPC-6151C Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur