Advantech PPC-153 Manuel utilisateur

PPC-153PPC-153

PPC-153

Celeron™ processor-based

panel PC with 15" LCD flat panel

display

User’s ManualUser’s Manual

User’s Manual

This document is copyrighted, 2000, by Advantech Co., Ltd. All

rights are reserved. Advantech Co., Ltd. reserves the right to alter the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech. Information provided in this manual is

intended to be accurate and reliable. However, Advantech assumes no

responsibility for use of this manual, nor for any infringements upon

the rights of third parties which may result from such use.

All brand and product names mentioned herein are trademarks or

registered trademarks of their respective holders.

Part No. 2002015300

1st Edition Printed in Taiwan February 2000

FCC Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

environment. This equipment generates, uses and can radiate radio

frequency energy. If not installed and used in accordance with this

user's manual, it may cause harmful interference to radio communica-

tions. Note that even when this equipment is installed and used in

accordance with this user's manual, there is still no guarantee that

interference will not occur. If this

equipment is believed to be causing harmful interference to radio or

television reception, this can be determined by turning the equipment

on and off. If interference is occurring, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from

that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Warning: Any changes or modifications made to the equip-

ment which are not expressly approved by the

relevant standards authority could void your authority

to operate the equipment.

Packing List

Before installing your panel PC, ensure that the following materials

have been received:

• PPC-153 series panel PC

• User's manual

• Accessories for PPC-153

- Y-shaped adapter for PS/2 mouse and AT keyboard

- Power cord (1.8 m) - USA type (other types are available on

request)

- Floppy disk with CD-ROM drive driver

- "Drivers and Utilities" CD-ROM disc

- Mounting kits and packet of screws

- Heat sink (optional) (refer to Notes 1 and 2 below)

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Note 1: If the unit you have bought is basic (i.e.without a

CPU, HDD, or SDRAM), you will find this optional

item in the accessory box.

Note 2: If you install an Intel

Celeron™ processor yourself,

you must install a heat sink above the CPU.This will

avoid heat damage to the CPU.

Additional Information and Assistance

1. Visit the Advantech websites at www.advantech.com or

www.advantech.com.tw where you can find the latest information

about the product.

2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need addition-

al assistance. Please have the following information ready before

you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version,

application software, etc.)

• A complete description of the problem

• The exact wording of any error messages

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the

equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened

only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to

the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRON-

MENT WHERE THE STORAGE TEMPERATURE IS BELOW -20° C (-4° F)

OR ABOVE 60° C (140° F). THIS MAY DAMAGE THE EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is no

more than 70dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie

Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch

zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugängli-

ch sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen

oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor überhit-

zung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen kann. Es

sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom

Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung

vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in

das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen

Sicherheit nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und

von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b -Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d -Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioni ert

oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Bitte lassen Sie das Gerät nicht unbehehrt hinten unter -20° C (-4° F) oder oben

60° C (140° F), weil diesen Temperaturen das Gerät zerstören könten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70

dB(A) oder weiger.

DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Contents

Chapter 1 General Information 1

1.1 Introduction ............................................................ 2

1.2 How to Use This Manual ........................................ 4

1.3 Specifications......................................................... 6

General ...................................................................................6

Standard PC functions.............................................................6

PCI SVGA/flat panel interface .................................................7

Audio function..........................................................................7

PCI bus Ethernet interface ......................................................8

PCMCIA interface....................................................................8

Touchscreen (optional)............................................................8

Optional modules ....................................................................9

Environment ............................................................................9

1.4 Dimensions .......................................................... 10

Chapter 2 System Setup 11

2.1 A Quick Tour of the Panel PC.............................. 12

2.2 Preparing For First-time Use................................ 15

2.3 Installation Procedures......................................... 15

2.3.1 Connecting the power cord...........................................15

2.3.2 Connecting the keyboard and mouse ...........................16

2.3.3 Switching on the power.................................................16

2.4 Running the BIOS Setup Program....................... 17

2.5 Installing System Software................................... 18

2.6 Installing the Drivers............................................. 19

Chapter 3 Using the Panel PC 21

3.1 Introduction .......................................................... 22

3.2 Floppy Drive......................................................... 22

3.3 CD-ROM Drive ..................................................... 23

3.4 PCMCIA ............................................................... 24

3.5 PS/2 Mouse and Keyboard .................................. 27

3.6 PCI/ISA Bus Expansion ....................................... 27

3.7 Parallel Port.......................................................... 29

3.8 Serial COM Ports ................................................. 29

3.9 VGA Port.............................................................. 30

3.10 Game Port............................................................ 30

3.11 USB Ports ............................................................ 30

3.12 Audio Interface..................................................... 31

3.13 Ethernet ............................................................... 31

3.14 Adjusting the LCD Contrast and Brightness......... 31

3.15 Touchscreen (Optional)........................................ 32

Chapter 4 Hardware Installation and Upgrading 33

4.1 Overview of Hardware Installation and Upgrading 34

4.2 Disassembling the Panel PC................................ 34

4.3 Installing the 2.5" Hard Disk Drive (HDD) ............ 36

4.4 Installing the Central Processing Unit (CPU) ....... 37

4.5 Installing the SDRAM Memory Module ................ 40

4.6 Installing the Floppy Disk Drive (FDD) and Slim

CD-ROM Drive ..................................................... 41

Chapter 5 Jumper Settings and Connectors 43

5.1 Jumpers and Connectors ..................................... 44

5.1.1 Setting jumpers.............................................................44

5.1.2 Jumpers and switch......................................................45

5.1.3 Locating jumpers and switch ........................................46

5.1.4 Connectors ...................................................................47

5.1.5 Locating connectors .....................................................48

5.2 CPU Installation ................................................... 49

5.3 CMOS Clear for External RTC (JP8).................... 49

5.4 COM-port Interface .............................................. 50

5.4.1 COM2 RS-232/422/485 setting (JP3, JP4, JP5) ...........50

5.4.2 COM1 / COM2 pin 9 output type setting (JP9)..............51

5.4.3 COM3 / COM4 pin 9 output type setting (JP6)..............52

5.5 Internal -12 V Source Selection Setting (JP1)...... 52

5.6 VGA Interface ...................................................... 53

5.6.1 LCD panel power setting ..............................................53

5.6.2 Panel type select (SW1) ...............................................53

5.7 Watchdog Timer Configuration ............................ 54

5.7.1 Watchdog activity selection (JP7).................................54

Chapter 6 PCI Bus Ethernet Interface 55

6.1 Introduction .......................................................... 56

6.2 Installation of Ethernet Driver............................... 56

6.2.1 Installation for Windows 95 ...........................................57

6.2.2 Installation for Windows 98 ...........................................59

6.2.3 Installation for Windows NT ..........................................61

6.3 Further Information............................................... 63

Chapter 7 PCI SVGA Setup 65

7.1 Introduction .......................................................... 66

7.1.1 Chipset .........................................................................66

7.1.2 Display memory............................................................66

7.1.3 Display types ................................................................66

7.2 Installation of SVGA Driver .................................. 67

7.2.1 Installation for Windows 95 ...........................................68

7.2.2 Installation for Windows 98 ...........................................70

7.2.3 Installation for Windows NT ..........................................72

7.3 Further Information............................................... 74

Chapter 8 Audio 75

8.1 Introduction .......................................................... 76

8.2 Installation of Audio Driver ................................... 76

8.2.1 Installation for Windows 95/98 ......................................77

8.2.2 Installation for Windows NT ..........................................79

Autres manuels pour PPC-153

Table des matières

Autres manuels Advantech Écran tactile

Advantech

Advantech PPC-415 Manuel d'installation et d'exploitation

Advantech

Advantech IPPC-9120G Manuel utilisateur

Advantech

Advantech POC-128 Manuel d'instructions

Advantech

Advantech PPC-S155T Manuel utilisateur

Advantech

Advantech RUGGED PENTIUM IPPC-9120 Manuel utilisateur

Advantech

Advantech PPC-6120 Manuel utilisateur

Advantech

Advantech UTC-W101E Manuel utilisateur

Advantech

Advantech Intel XScale PXA Touch Panel Computer TPC-66... Manuel utilisateur

Advantech

Advantech SPC-200 Series Manuel utilisateur

Advantech

Advantech ITA-8100 Manuel utilisateur

Advantech

Advantech IDK-1105 Series Manuel utilisateur

Advantech

Advantech PPC-3151SW Manuel utilisateur

Advantech

Advantech PPC-3150-XE4BE Manuel d'installation et d'exploitation

Advantech

Advantech PPC-123 Manuel utilisateur

Advantech

Advantech PPC-3211SW Manuel d'installation et d'exploitation

Advantech

Advantech PPC-3151W Manuel utilisateur

Advantech

Advantech PPC-3210SW Manuel utilisateur

Advantech

Advantech TPC-1261H Manuel utilisateur

Advantech

Advantech PPC-3151W Manuel d'installation et d'exploitation

Advantech

Advantech UTC-318H Manuel utilisateur

Advantech

Advantech PPC-L61T Manuel utilisateur

Advantech

Advantech IPPC-9151 Series Manuel utilisateur

Advantech

Advantech PPC-6151C Manuel utilisateur

Advantech

Advantech PPC-57 Series Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur