Advantech PCI-1711 Manuel utilisateur
Copyright
This documentation and the software included with this product are
copyrighted 1999 by Advantech Co., Ltd. All rights are reserved.
Advantech Co., Ltd. reserves the right to make improvements in the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties which may result from its use.
Acknowledgments
PC-LabCard is a trademark ofAdvantech Co., Ltd. IBM and PC are
trademarks of International Business Machines Corporation. MS-
DOS,Windows, MicrosoftVisual C++ andVisual BASIC are trade-
marks of Microsoft Corporation. Intel and Pentium are trademarks of
Intel Corporation. Delphi and C++Builder are trademarks of Inprise
Corporation.
CE notification
The PCI-1711/1731, developed byADVANTECH CO., LTD., has
passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from Advantech.
Please contact your local supplier for ordering information.
On-line Technical Support
For technical support and service, please visit our support website at:
http://support.advantech.com
Part No. 2003171100 1st Edition
Printed inTaiwan October 1999
Contents
1. Introduction .................................................. 1
1.1 Features ...............................................................................1
1.2 Installation Guide ................................................................3
1.3 Software ...............................................................................5
1.4Accessories ..........................................................................5
2. Installation..................................................... 7
2.1 Unpacking ............................................................................7
2.2 Driver Installation ................................................................8
2.3 Hardware Installation..........................................................9
2.4 Device Setup & Configuration ..........................................12
2.5 Device Testing ...................................................................15
3. Signal Connections ...................................19
3.1 Overview ............................................................................19
3.2 I/O Connector.....................................................................19
3.3 Analog Input Connections ................................................ 22
3.4 Analog Output Connections.............................................. 22
3.5 Trigger Source Connections .............................................23
3.6 Field Wiring Considerations .............................................24
4. Software Overview..................................... 25
4.1 Programming Choices ......................................................25
4.2 DLL Driver Programming Roadmap ................................27
5. Calibration................................................... 29
5.1 VR Assignment...................................................................29
5.2 A/D Calibration ..................................................................30
5.3 D/A Calibration ..................................................................30
5.4 Self A/D Calibration...........................................................31
Appendix A
Specifications ................................................. 33
Appendix B
Block Diagram ................................................ 35
Appendix C
Register Structure and Format ....................37
C.1 Overview............................................................................37
C.2 I/O Port Address Map ........................................................37
C.3 Channel Number and A/D Data — BASE+0 and
BASE+1..............................................................................42
C.4 Software A/D Trigger — BASE+0 ....................................42
C.5 A/D Channel Range Setting — BASE+2 .........................43
C.6 MUX Control — BASE+4 and BASE+5 ............................44
C.7 Status Register — BASE+6 and BASE+7 .........................45
C.8 Control Register — BASE+6 .............................................46
C.9 Clear Interrupt and FIFO — BASE+8 and BASE+9 .........47
C.10 D/A Output Channel 0 — BASE+10 and BASE+11 .........47
C.11 D/A Output Channel 1 — BASE+12 and BASE+13 .........48
C.12 D/A Reference Control —BASE+14 ................................49
C.13 Digital I/O Registers — BASE+16 and BASE+17............50
C.14 Programmable Timer/Counter Registers BASE+24,
BASE+26,BASE+28 andBASE+30 .................................50
Appendix D
82C54 Counter Function ............................... 51
D.1 The Intel 82C54..................................................................51
D.2 Counter Read/Write and Control Registers.....................51
D.3 Counter Operating Modes ................................................53
D.4 Counter Operations...........................................................55
– 1 –
Chapter 1
PCI-1711/1731 User’s Manual
Advantech Co., Ltd.
www.advantech.com
Chapter
1
1. Introduction
Thank you for buying the Advantech PCI-1711/1731 PCI card. The
Advantech PCI-1711/1731 is a powerful data acquisition (DAS) card for
the PCI bus. It features a unique circuit design and complete functions
for data acquisition and control. PCI-1711/1731 provides specific
functions for different user requirements:
PCI-1711 12-bitLow-costMultifunctionDAScard
PCI-1731 12-bitLow-costMultifunctionDAScardw/oanalogoutput
The following sections of this chapter will provide further information
about features of the DAS cards, a Quick Start for installation, together
with some brief information on software and accessories for the PCI-
1711/1731card.
1.1 Features
The Advantech PCI-1711/1731 provides users with the most requested
measurement and control functions as seen below:
q16-channel Single-Ended A/D Input
q12-bit A/D conversion with up to 100 kHz sampling rate
q16-channel Digital Input
q16-channel Digital Output
q2-channelD/A Output (onlyfor PCI-1711)
qProgrammableCounter/Timer
qAutomatic Channel/Gain Scanning
TheAdvantech PCI-1711/1731offers the followingmain features:
Plug-and-Play Function
The Advantech PCI-1711/1731 is a Plug-and-Play device, which fully
complieswith the PCISpecification Rev 2.1. During card installation, all
bus-related configurations such as base I/O address and interrupts are
conveniently taken care of by the Plug-and-Play function. You have
virtually no need to set any jumpers or DIP switches.
Flexible Input Types and Range Settings
The PCI-1711/1731 features an automatic channel/gain scanning
circuit. This circuit design controls multiplexer switching during
sampling. Users can set different gain values for each channel
– 2 –
Chapter 1
PCI-1711/1731 User’s Manual Advantech Co., Ltd.
www.advantech.com
according to their needs for the corresponding range of input voltage.
The gain value settings thus selected is stored in the SRAM. This
flexible design enables multi-channel and high-speed sampling for
high-performance data acquisition (up to 100 KS/s .)
On-boardFIFO(First-In-First-Out) Memory
The PCI-1711/1731 provides an on-board FIFO memory buffer, storing
up 1 to 1K A/D samples. Users can either enable or disable the
interrupt request feature of the FIFO buffer. While the interrupt request
for FIFO is enabled, users are allowed to specify whether an interrupt
request will be sent with each sampling action or only when the FIFO
buffer is half saturated. This useful feature enables a continuous high-
speed data transfer with a more predictable performance on operating
systems.
Optional D/A Output for Cost Savings
The PCI-1711 goes further with 2 analog output channels, while the
PCI-1731 doesn’t. It is for users to differentiate between the PCI-1711
and the PCI-1731 according to what they really need as the best
solution with no extra cost.
16 Digital Inputs and 16 Digital Outputs
The PCI-1711/1731 provides 16 digital input channels and 16 digital
output channels. Users are left with great flexibility to design and
customize their applications according to their specific needs.
On-board Programmable Counter
ThePCI-1711/1731isequipped with a programmable counter, which
can serve as a pacer trigger for A/D conversions. The counter chip is
an 82C54 or its equivalent, which incorporates three 16-bit counters on
a 10 MHz clock. One of the three counters is used as an event counter
for input channels or pulse generation. The other two are cascaded
into a 32-bit timer for pacer triggering.
Note:
✎Pace trigger determines how fast A/D conversion will be done in pacer
trigger mode.
✎For detailed specifications of the PCI-1711/1731, please refer to Appen-
dix A, Specifications.
– 3 –
Chapter 1
PCI-1711/1731 User’s Manual
Advantech Co., Ltd.
www.advantech.com
1.2 Installation Guide
Before you install your PCI-1711/1731 card, please make sure you have
the following necessary components:
qPCI-1711orPCI-1731DAScard
qPCI-1711/1731User’sManual
qDriversoftware Advantech DLL drivers
(included in the companion CD-ROM)
qWiringcable PCL-10168
qWiringboard PCLD-8710,ADAM-3968
qComputer Personal computer or workstation with a
PCI-bus slot (running Windows 95/98/NT)
Some other optional components are also available for enhanced
operation:
qApplicationsoftware ActiveDAQ, GeniDAQ or other third-party
software packages
After you have got the necessary components and maybe some
accessories for enhanced operation of your DAS card, you can then
begin the Installation procedures. Figure 1-1 on the next page pro-
vides a concise flow chart to give users a broad picture of the software
and hardware installation procedures:
– 4 –
Chapter 1
PCI-1711/1731 User’s Manual Advantech Co., Ltd.
www.advantech.com
Install Driver CD-ROM, then power-off PC
Plug-in Hardware and power-on PC
Use configuration utility to configure hardware
Use testing utility to test hardware
Read examples & driver manual
Start to write your application
Fig. 1-1 Installation Flow Chart
– 5 –
Chapter 1
PCI-1711/1731 User’s Manual
Advantech Co., Ltd.
www.advantech.com
1.3 Software
Advantech offers a rich set of DLL drivers, third-party driver support
and application software to help fully exploit the functions of your
PCI-1711/1731card:
lDLLdriver (on thecompanion CD-ROM)
lLabviewdriver
lAdvantech ActiveDAQ
lAdvantech GeniDAQ
For more information on software, please refer to Chapter 4, Software
Overview.
Users who intend to program directly at the registers of the DAS
device can have register-level programming as an option. Since
register-level programming is often difficult and laborious, it is
usually recommended only for experienced programmers. For more
information, please refer to Appendix C, Register Structure and
Format.
1.4 Accessories
Advantech offers a complete set of accessory products to support the
PCI-1711/1731 cards. These accessories include:
Wiring Cable
qPCL-10168 The PCL-10168 shielded cable is specially designed
for PCI-1711/1731 cards to provide high resistance to noise. To
achieve a better signal quality, the signal wires are twisted in such a
way as to form a “twisted-pair cable”, reducing crosstalk and noise
from other signal sources. Furthermore, its analog and digital lines
are separately sheathed and shielded to neutralize EMI/EMC
problems.
Wiring Boards
qADAM-3968 TheADAM-3968 is a 68-pin SCSI wiring terminal
modulefor DIN-rail mounting. Thisterminal module can be readily
connected to the Advantech PC-Lab cards and allow easy yet
reliable access to individual pin connections for the PCI-1711/1731
card.
– 6 –
Chapter 1
PCI-1711/1731 User’s Manual Advantech Co., Ltd.
www.advantech.com
qPCLD-8710 ThePCLD-8710 is a DIN-rail mounting screw-
terminal board to be used with any of the PC-LabCards which have
68-pinSCSI connectors. The PCLD-8710features the following
functions:
l2 additional 20-pin flat-cable connectors for digital input and
output
lReserved space on the board to meet future needs for signal-
conditioning circuits (low-pass filter, voltage attenuator and
current shunt)
lIndustrial-grade screw-clamp terminal blocks for heavy-duty and
reliable connections.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Advantech Carte PCI
Advantech
Advantech PCI-1752U Manuel utilisateur
Advantech
Advantech AIMB-228 Manuel utilisateur
Advantech
Advantech PCI-1752 Manuel utilisateur
Advantech
Advantech PCA-6008VG Manuel utilisateur
Advantech
Advantech MIC-3612/3-BE Manuel utilisateur
Advantech
Advantech PCIE-1765 Manuel utilisateur
Advantech
Advantech DVP-7020A Manuel utilisateur
Advantech
Advantech PCI-1240 Manuel utilisateur
Advantech
Advantech PCI-1737U Manuel utilisateur
Advantech
Advantech PCI-1761 Manuel utilisateur
Advantech
Advantech PCI-1758 Series Manuel utilisateur
Advantech
Advantech PCI-1220U Manuel utilisateur
Advantech
Advantech SOM-2353 Manuel d'installation et d'exploitation
Advantech
Advantech PCI-1711U Series Manuel utilisateur
Advantech
Advantech PCI-1724U Manuel utilisateur
Advantech
Advantech VEGA-340 Manuel d'installation et d'exploitation
Advantech
Advantech EKI-6340 Series Manuel utilisateur
Advantech
Advantech DSPC-8682 Manuel utilisateur
Advantech
Advantech MIC-3620 Manuel utilisateur
Advantech
Advantech MIO-5393 Manuel utilisateur
Manuels Carte PCI populaires d'autres marques
Belkin
Belkin F5D7000F Manuel utilisateur
Pericom
Pericom PI7C7100 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3548 Manuel utilisateur
Digium
Digium TE200 Series Manuel utilisateur
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur
Western Digital
Western Digital FireWire PCI Adapter Manuel utilisateur