Advantech PCI-1780 Manuel utilisateur

The documentation and the software included with this product are

copyrighted 2002 by Advantech Co., Ltd. All rights are reserved.

Advantech Co., Ltd. reserves the right to make improvements in the

products described in this manual at any time without notice. No part of this

manual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for

any infringements of the rights of third parties, which may result from its

use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM and PC are

trademarks of International Business Machines Corporation. MS-DOS,

Windows, Microsoft Visual C++ and Visual BASIC are trademarks of

Microsoft Corporation. Intel and Pentium are trademarks of Intel

Corporation. Delphi and C++ Builder are trademarks of Inprise

Corporation.

CE notification

The PCI-1780, developed by ADVANTECH CO., LTD., has passed the CE

test for environmental specifications when shielded cables are used for

external wiring. We recommend the use of shielded cables. This kind of

cable is available from Advantech. Please contact your local supplier for

ordering information.

On-line Technical Support

For technical support and service, please visit our support website at:

http://www.advantech.com/support

Note:

✎ Concerning environmental protection, to reduce the paper used for the

user’s manual. Starting the page of Appendix C, please use the PDF file

on the CD-ROM or download form support on www.advantech.com.

Part No. 2003178000 1st Edition

Printed in Taiwan Dec 2002

Contents

1. INTRODUCTION.................................................................................................................. 1

1.1 FEATURES ....................................................................................................................... 1

1.2 APPLICATIONS ................................................................................................................. 3

1.3 INSTALLATION GUIDE ...................................................................................................... 3

1.4 SOFTWARE OVERVIEW..................................................................................................... 5

1.5 DEVICE DRIVERS PROGRAMMING ROADMAP .................................................................. 6

1.6 ACCESSORIES .................................................................................................................. 8

2. INSTALLATION.................................................................................................................... 9

2.1 UNPACKING ..................................................................................................................... 9

2.2 DRIVER INSTALLATION .................................................................................................. 11

2.3 HARDWARE INSTALLATION............................................................................................ 12

2.4 DEVICE SETUP & CONFIGURATION................................................................................ 15

3. SIGNAL CONNECTIONS.................................................................................................. 19

3.1 OVERVIEW .................................................................................................................... 19

3.2 SWITCH AND JUMPER SETTINGS .................................................................................... 19

3.3 SIGNAL CONNECTIONS .................................................................................................. 21

APPENDIX A. SPECIFICATIONS........................................................................................ 25

APPENDIX B. BLOCK DIAGRAM ...................................................................................... 27

APPENDIX C. REGISTER STRUCTURE AND FORMAT ............................................... 29

C.1 OVERVIEW .................................................................................................................... 29

C.2 I/O PORT ADDRESS MAP .............................................................................................. 29

C.3 COUNTER 0/1/2/3/4/5/6/7 MODE — BASE+00/08/10/18/20/28/30/38H ...................... 36

C.4 COUNTER 0/1/2/3/4/5/6/7 LOAD — BASE+02/0A/12/1A/22/2A/32/3AH ................... 39

C.5 COUNTER 0/1/2/3/4/5/6/7 HOLD — BASE+04/0C/14/1C/24/2C/34/3CH .................... 40

C.6 COUNTER 0/1/2/3/4/5/6/7 COMMAND — BASE+06/0E/16/1E/26/2E/36/3EH ............. 41

C.7 COMMAND ENABLE — BASE+40H ............................................................................. 42

C.8 INTERRUPT CONTROL — BASE+42H........................................................................... 43

C.9 INTERRUPT STATUS — BASE+42H .............................................................................. 43

iii

C.10 CLEAR INTERRUPT — BASE+44H ............................................................................. 44

C.11 DIGITAL OUTPUT — BASE+48H................................................................................ 44

C.12 DIGITAL INPUT — BASE+48H................................................................................... 44

C.13 BOARD ID — BASE+4EH......................................................................................... 45

C.14 FOUT 0/1/2/3/4/5/6/7

CONTROL — BASE + 50~5FH............................................... 46

APPENDIX D. WAVEFORM OF EACH MODE ................................................................. 49

D.1 MODE A WAV E F O R M .................................................................................................... 51

D.2 MODE B WAV E F O R M ..................................................................................................... 52

D.3 MODE C WAV E F O R M ..................................................................................................... 53

D.4 MODE D WAV E F O R M .................................................................................................... 54

D.5 MODE E WAV E F O R M ..................................................................................................... 55

D.6 MODE F WAV E F O R M ..................................................................................................... 56

D.7 MODE G WAV E F O R M .................................................................................................... 57

D.8 MODE H WAV E F O R M .................................................................................................... 58

D.9 MODE I WAV E F O R M ...................................................................................................... 59

D.10 MODE J WAV E F O R M .................................................................................................... 60

D.11 MODE K WAV E F O R M ................................................................................................... 61

D.12 MODE L WAV E F O R M ................................................................................................... 62

D.13 MODE O WAV E F O R M .................................................................................................. 63

D.14 MODE R WAV E F O R M ................................................................................................... 64

D.15 MODE U WAV E F O R M .................................................................................................. 65

D.16 MODE X WAV E F O R M ................................................................................................... 66

1. Introduction

Thank you for buying the Advantech PCI-1780. The PCI-1780 is a

general purpose multiple channel counter/timer card for the PCI bus. It

targets the AM9513 to implement the counter/timer function by CPLD.

It provides eight 16-bit counter channels and 8 digital outputs and 8

digital inputs. The powerful Advantech-designed counter functions

fulfill your industrial or laboratory application needs.

The following sections of this chapter will provide further information

about features of the multifunction cards, a Quick Start for installation,

together with some brief information on software and accessories for the

PCI-1780 card.

1.1 Features

❏8 independent 16-bit counters

❏8 programmable clock source

❏8 digital TTL outputs and 8 digital TTL inputs

❏Up to 20 MHz input frequency

❏Multiple counter clock source selectable

❏Counter output programmable

❏Counter gate function

❏Flexible interrupt source select

❏Board ID

The Advantech PCI-1780 offers the following main features:

Flexible Counter Modes

The PCI-1780 features up to 12 programmable counter modes, to

provides one shot output, PWM output, periodic interrupt output,

time-delay output, and to measurement the frequency and the pulse

width. The PCI-1780 is an ideal solution for variant counter/timer

applications.

Special Shielded Cable for Noise Reduction

The PCL-10168 shielded cable is specially designed for the PCI-1780

for reducing noise. Its wires are all twisted pairs, with input signals and

output signals separately shielded, providing minimal cross talk between

signals and offering the best protection against EMI/EMC problems.

Counter mode table:

(N: No gate control, L: Level gate control, E: Edge gate control)

Counter Mode A B C D E F G H I J K L

Special Gate (CM6) 0 0 0 0 0 0 0 0 0 0 0 0

Reload Source (CM5) 0 0 0 0 0 0 1 1 1 1 1 1

Repetition (CM4) 0 0 0 1 1 1 0 0 0 1 1 1

Gate Control (CM15~CM12) N L E N L E N L E N L E

Count to TC once, then disarm ✓✓✓

Count to TC twice, then disarm ✓✓✓

Count to TC repeatedly without disarming

✓✓✓

Gate input dose not gate counter input ✓✓✓✓

Count only during active gate level ✓

✓

Start count on active gate edge and stop count on next TC ✓✓

Start count on active gate edge and stop count on second TC

✓

Start count on active gate edge and stop count on inactive gate edge

Reload counter from Load Register on TC ✓✓✓✓✓✓

Reload counter on each TC, alternating reload source between Load

and Hold Registers ✓✓✓✓✓✓

Counter Mode M N O P Q R S T U V W X

Special Gate (CM6) 1 1 1 1 1 1 1 1 1 1 1 1

Reload Source (CM5) 0 0 0 0 0 0 1 1 1 1 1 1

Repetition (CM4) 0 0 0 1 1 1 0 0 0 1 1 1

Gate Control (CM15~CM12) N L E N L E N L E N L E

Count to TC once, then disarm ✓✓✓

Count to TC twice, then disarm ✓✓✓

Count to TC repeatedly without disarming

✓✓✓

Gate input dose not gate counter input ✓✓✓✓

Count only during active gate level ✓

✓

Start count on active gate edge and stop count on next TC ✓✓

Start count on active gate edge and stop count on second TC

✓

Start count on active gate edge and stop count on inactive gate edge ✓✓✓✓

Reload counter from Load Register on TC ✓✓✓✓✓✓

Reload counter on each TC, alternating reload source between Load

and Hold Registers ✓✓✓✓✓✓

Note: Counter modes M, N, P, Q, S, T, V, Ware identical to A, B, D, E, G, H, J, K.

Note:

✎ For detailed specifications of the PCI-1780, please refer to Appendix A,

Specifications.

1.2 Applications

❏Event counting

❏One shot output

❏Programmable frequency output

❏Frequency measurement

❏Pulse width measurement

❏PWM output

❏Periodic interrupt generation

❏Time-delay generation

1.3 Installation Guide

Before you install your PCI-1780 card, please make sure you have the

following necessary components:

❏PCI-1780 DA&C card

❏PCI-1780 User’s Manual

❏Driver software Advantech DLL drivers

(included in the companion CD-ROM)

❏Wiring cable PCL-10168 (option)

❏Wiring board ADAM-3968 (option)

❏Computer Personal computer or workstation with a

PCI-bus slot (running Windows 2000/95/98/

NT/ME/XP)

Some other optional components are also available for enhanced

operation:

❏Application software ActiveDAQ, GeniDAQ or other third-party

software packages

After you get the necessary components and maybe some of the

accessories for enhanced operation of your Multifunction card, you can

then begin the Installation procedures. Figure 1-1 on the next page

provides a concise flow chart to give users a broad picture of the

software and hardware installation procedures:

Start to write your own application

Read examples & driver manual

Use test utility to test hardware

Use driver utility to configure hardware

Install Hardware and power-on PC

Install Driver from CD-ROM, then power-off PC

Fig. 1-1 Installation Flow Chart

1.4 Software Overview

Advantech offers a rich set of DLL drivers, third-party driver support

and application software to help fully utilize the functions of your

PCI-1780 card:

Device Drivers (on the companion CD-ROM)

❏

LabVIEW driver*

Advantech ActiveDAQ

Advantech GeniDAQ

Programming choices for DA&C cards: You may use Advantech

application software such as Advantech Device Drivers. On the other

hand, advanced users can use another option for register-level

programming, although it is not recommended due to its laborious and

time-consuming nature.

Device Drivers

The Advantech Device Drivers software is included on the companion

CD-ROM at no extra charge. It also comes with all Advantech DA&C

cards. Advantech’s device drivers feature a complete I/O function

library to help boost your application performance. The Advantech

Device Drivers for Windows 2000/95/98/ ME/NT/XP works

seamlessly with development tools such as Visual C++, Visual Basic,

Inprise C++ Builder and Inprise Delphi.

who find it necessary to write code directly at the level of device

registers. Since register-level programming requires much effort and

time, we recommend that you use the Advantech Device Drivers

instead. However, if register-level programming is necessary, you

should refer to the relevant information in Appendix C, Register

Structure and Format, or to the example codes included on the

companion CD-ROM.

1.5 Device Drivers Programming Roadmap

This section will provide you a roadmap to demonstrate how to build

an application from scratch using Advantech Device Drivers with your

favorite development tools such as Visual C++, Visual Basic, Delphi

and C++ Builder. The step-by-step instructions on how to build your

own applications using each development tool will be given in the

Device Drivers Manual. Moreover, a rich set of example source code is

also given for your reference.

Programming Tools

Programmers can develop application programs with their favorite

development tools:

❏Visual C++

❏Visual Basic

❏Delphi

❏C++ Builder

For instructions on how to begin programming works in each

development tool, Advantech offers a Tutorial Chapter in the Device

Drivers Manual for your reference. Please refer to the corresponding

sections in this chapter of the Device Drivers Manual to begin your

programming efforts. You can also look at the example source code

provided for each programming tool, since they can get you very well

oriented.

The Device Drivers Manual can be found on the companion CD-ROM.

Or if you have already installed the Device Drivers on your system,

The Device Drivers Manual can be readily accessed through the Start

button:

Start/Programs/Advantech Driver V2.0a/Device Driver Manual

The example source codes could be found under the corresponding

installation folder such as the default installation path:

\Program Files\Advantech\ADSAPI\Examples

Table des matières

Autres manuels Advantech Carte PCI

Advantech

Advantech PCIE-1760 Manuel utilisateur

Advantech

Advantech PCI-1761 Manuel utilisateur

Advantech

Advantech PCI-1240 Manuel utilisateur

Advantech

Advantech PCI-1718 Series Manuel utilisateur

Advantech

Advantech PCI-1724U Manuel utilisateur

Advantech

Advantech PCI-1710U-DE Manuel utilisateur

Advantech

Advantech PCA-684 Manuel utilisateur

Advantech

Advantech PCI-1680U Manuel utilisateur

Advantech

Advantech AIMB-228 Manuel utilisateur

Advantech

Advantech PCI-1714UL Manuel d'installation et d'exploitation

Advantech

Advantech PCA-5650 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1750 Manuel utilisateur

Advantech

Advantech PCI-1752 Manuel utilisateur

Advantech

Advantech MIC-3640 Manuel utilisateur

Advantech

Advantech PCM-3614I Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1755 Manuel utilisateur

Advantech

Advantech B+B SmartWorx McPC/Giga-MediaLinX Manuel utilisateur

Advantech

Advantech PCA-5630 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1723 Manuel utilisateur

Advantech

Advantech PCM-2312 Manuel utilisateur

Advantech

Advantech PCI-1737U Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1757UP Manuel utilisateur

Advantech

Advantech PCI-1713U Manuel utilisateur

Advantech

Advantech PCI-1730U Manuel d'installation et d'exploitation

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur