Advantech PCIE-1824 Manuel utilisateur

User Manual

PCIE-1824/1824L

16-bit, 32/16-ch Analog Output

PCI Express Card

PCIE-1824 User Manual ii

This documentation and the software included with this product are copyrighted 2019

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or transmitted in any

form or by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties which may result from its use.

Acknowledgments

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Have your manual, product, and any

helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2001182400 Edition 1

Printed in China December 2019

iii PCIE-1824 User Manual

This product has passed the CE test for environmental specifications when shielded

cables are used for external wiring. We recommend the use of shielded cables. This

kind of cable is available from Advantech. Please contact your local supplier for

ordering information.

Technical Support and Assistance

1. Visit the Advantech web site at http://support.advantech.com.tw/ where you

can find the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Have the follow-

ing information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are included and in

good condition. If any item does not accord with the table, Contact your dealer imme-

diately.

PCIE-1824 card

Startup or User Manual

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from

damage.

1. To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other

cards while the PC is on.

2. Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec-

tronic components.

PCIE-1824 User Manual iv

v PCIE-1824 User Manual

Contents

Chapter 1 Introduction..........................................1

1.1 Features .................................................................................................... 2

1.2 Applications............................................................................................... 2

1.3 Installation Guide ...................................................................................... 2

Figure 1.1 Installation Flow Chart ................................................ 4

1.4 Software Overview .................................................................................... 5

1.5 DAQNavi Device Driver Programming Roadmap ..................................... 5

1.6 Accessories............................................................................................... 6

Chapter 2 Installation............................................7

2.1 Unpacking ................................................................................................. 8

2.2 Driver Installation ...................................................................................... 9

2.3 Hardware Installation ............................................................................... 9

2.4 Device Setup & Configuration ................................................................. 10

Figure 2.1 PCIE-1824 Device Settings ...................................... 10

Figure 2.2 The Device Setting Page.......................................... 11

Figure 2.3 PCIE-1824 Device Testing ....................................... 11

Chapter 3 Signal Connections ...........................13

3.1 Overview ................................................................................................. 14

3.2 Switch and Jumper Settings.................................................................... 14

Figure 3.1 Connector and Switch Locations .............................. 14

3.2.1 Board ID (SW1)........................................................................... 15

Table 3.1: Board ID configuration.............................................. 15

3.2.2 Power On Configuration(JP2) ..................................................... 15

Table 3.2: Keep last status jumper configuration. ..................... 15

3.3 Signal Connections ................................................................................. 16

Figure 3.2 62-pin I/O Connector Pin Assignments .................... 16

3.3.1 I/O Connector Signal Description................................................ 17

3.3.2 Analog Output Connections ........................................................ 18

Figure 3.3 Voltage output signal connections............................ 18

Figure 3.4 Current output signal connection............................. 18

3.4 Field Wiring Considerations .................................................................... 19

Appendix A Specifications ....................................21

A.1 Function Block......................................................................................... 22

A.2 Analog Output ......................................................................................... 22

A.3 Voltage Output Accuracy ........................................................................ 22

A.4 Current Output Accuracy......................................................................... 23

A.5 Dynamic Performance............................................................................. 23

A.6 Power Output .......................................................................................... 23

A.7 General ................................................................................................... 23

PCIE-1824 User Manual vi

Chapter 1

1Introduction

This chapter introduces PCIE-

1824 and its typical applications.

Sections include:

Features

Applications

Installation Guide

Software Overview

Roadmap

Accessories

PCIE-1824 User Manual 2

PCIE-1824 is a high-density multiple channel analog card for the PCIE bus, where

each analog output channel is equipped with a 16-bit DAC. It features optional volt-

ages, current output and a Board ID switch. PCIE-1824 is an ideal solution for indus-

trial applications where multiple analog output channels are required.

1.1 Features

32 high-density analog output channels

Flexible Output Range: ±10 V, 0 ~ 20 mA and 4 ~ 20 mA

Synchronized output function

Keep output values when hot system reset

High ESD protection (2,000 VDC)

Board ID switch

PCIE-1824 offers the following main features:

Keeps Output Values After System Reset

Users can independently set the 32 outputs to different ranges: ±10 V, 0 ~ 20 mA or 4

~ 20 mA, and all ranges are software selectable. When the system is hot reset

(power not shut down), the PCIE-1824 can either retain the last analog output values,

or return to its default configuration, depending on the jumper setting. This practical

function eliminates dangers caused by improper operation during unexpected system

resets.

BoardID Switch

The PCIE-1824 has a built-in DIP switch that helps define each card’s ID when multi-

ple PCIE-1824 cards have been installed on the same PC chassis. The BoardID set-

ting function is very useful when building a system with multiple PCIE-1824 cards.

With the correct BoardID settings, you can easily identify and access each card dur-

ing hardware configuration and software programming.

1.2 Applications

Process control

Programmable voltage source

Programmable current sink

Servo control

Multiple loop PID control

1.3 Installation Guide

Before you install your PCIE-1824 card, please make sure you have the following

necessary components:

PCIE-1824 card

PCIE-1824 User Manual

Driver software Advantech DAQNavi software (available for download from the

Advantech website

Note! For detailed specifications and operations of PCIE-1824, please refer to

Appendices A.

3 PCIE-1824 User Manual

Chapter 1 Introduction

Personal computer or workstation with a PCI Express interface (running

Windows 10, 8 and 7)

Shielded Cable PCL-10162 (optional)

Wiring Board ADAM-3962 (optional)

Other optional components are also available for enhanced operation:

DAQ Navi, LabView or other 3rd-party software

After you get the necessary components and maybe some of the accessories for

enhanced operation of your multifunction card, you can then begin the installation

procedure. Figure 1.1 on the next page provides a concise flow chart to give you a

broad picture of the software and hardware installation procedures:

PCIE-1824 User Manual 4

Figure 1.1 Installation Flow Chart

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Carte PCI

Advantech

Advantech MIC-3620 Manuel utilisateur

Advantech

Advantech MIC-5602 Manuel utilisateur

Advantech

Advantech MIC-3302 Manuel utilisateur

Advantech

Advantech PCI-1742U Manuel utilisateur

Advantech

Advantech PCA-6008G2 Manuel utilisateur

Advantech

Advantech PCI-1710U Manuel d'installation et d'exploitation

Advantech

Advantech MIC-3401 Manuel utilisateur

Advantech

Advantech DVP-7020A Manuel utilisateur

Advantech

Advantech VEGA-340 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1723 Manuel utilisateur

Advantech

Advantech PCI-1752 Manuel utilisateur

Advantech

Advantech PCIE-1758 Series Manuel utilisateur

Advantech

Advantech PCI-1733 Manuel d'installation et d'exploitation

Advantech

Advantech EKI-6340 Series Manuel utilisateur

Advantech

Advantech PCI-1737U Manuel utilisateur

Advantech

Advantech PCI-1761 Manuel utilisateur

Advantech

Advantech PCM-3614I Manuel d'installation et d'exploitation

Advantech

Advantech ECU-P1706 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1601 Manuel utilisateur

Advantech

Advantech PCLD-8811 Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1174 Manuel utilisateur

Advantech

Advantech SOM-2353 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1710U-DE Manuel utilisateur

Advantech

Advantech PCI-1710U Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur