Advantech PCIE-1752 Manuel utilisateur

PCIE-1752

64-ch Isolated Digital Output PCI

Express Card

User Manual

PCIE-1752 User Manual ii

The documentation and the software included with this product are copy-

righted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003E75210 1st Edition

Printed in Taiwan March 2012

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

PCIE-1752 User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

FCC Class A

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Packing List

Before setting up the system, check that the items listed below are

included and in good condition. If any item does not accord with the

table, please contact your dealer immediately.

• PCIE-1752 DA&C Card

• StartUp or User Manual

• Companion DVD-ROM with DAQNavi drivers included

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

PCIE-1752 User Manual vi

vii

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Features ............................................................................. 2

1.2 Applications ..................................................................... 4

1.3 Installation Guide ............................................................. 4

Figure 1.1:Installation Flow Chart ................................. 5

1.4 Software Overview ........................................................... 6

1.5 DAQNavi Device Driver Programming Roadmap .......... 7

1.6 Accessories........................................................................ 8

Chapter 2 Installation ..................................................... 10

2.1 Unpacking ....................................................................... 10

2.2 Driver Installation ........................................................... 11

Figure 2.1:Setup Screen of Advantech Automation Soft-

ware 11

Figure 2.2:DAQNavi Installation Setup Screen .......... 12

2.3 Hardware Installation ...................................................... 13

2.4 Device Setup & Configuration ....................................... 14

Figure 2.3:The Device Setting of PCIE-1752 .............. 14

Figure 2.4:The Digital I/O Setting Page ...................... 15

Figure 2.5:The Device Testing of PCIE-1752 ............. 16

Chapter 3 Signal Connections ........................................ 18

3.1 Overview ......................................................................... 18

3.2 Switch and Jumper Settings ........................................... 18

Figure 3.1:Connector and Switch Locations ................ 18

3.2.1 Board ID (SW1) ........................................................... 19

Table 3.1:Board ID Setting (SW1) .............................. 19

3.2.2 Power On Configuration(JP1) ..................................... 20

Table 3.2:Power on configuration after hot reset (JP1) 20

3.2.3 Channel-Freeze Function (JP2) ................................... 20

Table 3.3:Channel-Freeze Function Input Mode (JP2) 20

3.3 Signal Connections.......................................................... 21

Figure 3.2: I/O Connector Pin Assignments ................ 21

3.3.1 I/O Connector Pin Definition ....................................... 22

Table 3.4:I/O Connector Signal Descriptions .............. 22

3.3.2 Isolated Digital Output ................................................. 23

Figure 3.3:Isolated Digital Output Connection ............ 23

3.3.3 Channel-Freeze Function ............................................. 23

Figure 3.4:Wiring in wet contact input mode .............. 23

Figure 3.5:Wiring in dry contact input mode .............. 24

3.4 Field Wiring Considerations .......................................... 24

Appendix A Specifications ................................................. 26

A.1 Isolated Digital Output .................................................... 26

A.2 General ............................................................................ 26

PCIE-1752 User Manual viii

Appendix B Block Diagrams ............................................. 28

Appendix C ADAM-3951 Pin Assignment ....................... 30

Figure C.1:Connect to PCL-10250 CON1 ................... 30

Figure C.2:Connect to PCL-10250 CON2 ................... 31

CHAPTER

Introduction

This chapter introduces the PCIE-1752

cards and their typical applications.

Sections include:

• Features

• Applications

• Installation Guide

• Software Overview

• Device Driver Roadmap

• Accessories

PCIE-1752 User Manual 2

Chapter 1 Introduction

Thank you for buying the Advantech PCIE-1752 which is a 64-ch

isolated digital output card. It is an advanced-performance data

acquisition card based on 32-bit PCI Express bus architecture. It features

a unique circuit design and complete functions for data acquisition and

control. The following sections of this chapter will provide further

information about features of PCIE-1752, a Quick Start for installation,

together with some brief information on software and accessories.

1.1 Features

• 64 isolated digital output channels

• High-voltage isolation on output channels (2,500 VDC)

• Wide output range (5 ~ 40 VDC)

• High-sink current for isolated output channels (500 mA max./ch)

• Output status read-back

• Keeps the output settings and values after system hot reset

• Channel-Freeze function

• Board ID

PCIE-1752 offers the following main features:

Robust Protection

The PCIE-1752 features a robust isolation protection for applications in

industrial, lab and machinery automation. The PCIE-1752 can durably

withstand a voltage up to 2,500 VDC, preventing your host system from

any incidental harms.

Wide Output Range

The PCIE-1752 also features a wide output voltage range from 5 to 40

VDC, suitable for most industrial applications with 12 VDC/24 VDC out-

put voltage. In the mean time, we are also ready to serve your special

needs for specific output voltage range. Do not hesitate to ask us about

tailoring our standard products to meet your specifications. All these mer-

its make PCIE-1752 the best choice for industrial applications.

Table des matières

Autres manuels Advantech Carte PCI

Advantech

Advantech MIC-3612/3-BE Manuel utilisateur

Advantech

Advantech PCA-6008VG Manuel utilisateur

Advantech

Advantech PCIE-1824 Manuel utilisateur

Advantech

Advantech PCI-1680U Manuel utilisateur

Advantech

Advantech RIO-3302 Manuel utilisateur

Advantech

Advantech PCA-6194 Manuel utilisateur

Advantech

Advantech B+B SmartWorx McPC/Giga-MediaLinX Manuel utilisateur

Advantech

Advantech PCIE-1884 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1220U Manuel utilisateur

Advantech

Advantech PCIE-1744 Manuel utilisateur

Advantech

Advantech MIC-3756 Manuel utilisateur

Advantech

Advantech DVP-7635HE Manuel utilisateur

Advantech

Advantech PCI-1730U Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1737U Manuel utilisateur

Advantech

Advantech PCI-1755 Manuel utilisateur

Advantech

Advantech PCA-6005-B Manuel utilisateur

Advantech

Advantech PCIE-1763AH Manuel utilisateur

Advantech

Advantech PCI-1737U Manuel d'installation et d'exploitation

Advantech

Advantech PCN-6351 Series Manuel utilisateur

Advantech

Advantech PCM-2604C-AE Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1805 Manuel utilisateur

Advantech

Advantech PCI-1730 Manuel utilisateur

Advantech

Advantech PCI-1753 Manuel utilisateur

Advantech

Advantech EKI-6340 Series Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur