Advantech PCI-1601 Manuel utilisateur

2nd Edition

Printed in Taiwan July 2001

This documentation and the software included with this product are

copyrighted 2001 by Advantech Co., Ltd. All rights are reserved.

Advantech Co., Ltd. reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual or software may be reproduced, copied,

translated or transmitted, in any form or by any means without the

prior written permission of Advantech Co., Ltd. Information provided

in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of rights of third parties which may result from its use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM, PC and

PC/XT/AT are trademarks of International Business Machines

Corporation. MS-DOS, MASM, QuickBASIC, Microsoft C and MS-

PASCAL are trademarks of Microsoft Corporation. Intel is a trademark

of Intel Corporation. Turbo C and Turbo PASCAL are trademarks of

Borland International.

Contents

Chapter 1: Introduction ................................................ 1

Description ............................................................................. 2

Features .................................................................................. 2

Specifications ......................................................................... 3

Ordering Information .......................................................... 5

Chapter 2: Hardware Configuration ............................. 7

Initial Inspection.................................................................... 8

Jumper and Switch Locations ............................................. 9

Jumper settings ................................................................... 14

How to set jumpers............................................................ 14

Default Settings ................................................................. 14

Card installation.................................................................. 15

RS-422/485 selection (for PCI-1601/1602/1612) .......... 16

Enable mode selection ...................................................... 16

Terminator resistor setup (for PCI-1601/1602/1612)..... 16

Chapter 3: Driver Setup & Installation ....................... 17

Overview .............................................................................. 18

For Windows 95/98 Driver Setup..................................... 18

For Windows NT Driver Setup ......................................... 18

Windows 95/98 Driver Setup............................................. 19

Steps for Windows 95/98 Driver Setup ........................... 19

Reboot your system after Win95/98 driver Setup .......... 22

PCI UARTs Device Driver Installation ...................................................... 22

PCI Bridge Device Driver Installation........................................................ 26

Verify your Win95/98 Driver Setup................................. 27

Configure PCI ICOM serial devices on Windows 95/9831

Configuring PCI UARTs Device ................................................................. 33

Configuring PCI Bridge Device ................................................................... 34

Configuring ports ........................................................................................ 34

Remove PCI ICOM series device..................................... 38

Steps for Complete Win98/98 Driver Uninstall.............. 42

Windows NT Driver Setup................................................. 43

Steps for Windows NT Driver Setup................................ 43

Start the Device Function in Windows NT...................... 47

Verify your NT driver Setup............................................. 48

Verify your NT Driver Function ...................................... 49

Stop the Device Function in Windows NT...................... 50

Chapter 4: ICOM Tools ................................................. 51

Introduction ......................................................................... 52

Installation ........................................................................... 52

User Interface of ICOM Tools.......................................... 52

Using the ICOM Tools utility ............................................ 56

Port Selection ..................................................................... 56

4.3.2 Configure the Port .................................................. 58

Run the test................................................................................................. 59

Stop the test................................................................................................ 60

Close Port ........................................................................... 61

Exit the ICOM Tools utility............................................... 61

Messages on the Status Bar and Message Logo area ... 61

Status Bar messages .......................................................... 61

Message Logo messages .................................................. 61

Chapter 5: Pin Assignment & Wiring .......................... 63

Pin assignments ................................................................... 64

PCI-1601/1602 .................................................................. 64

RS-422 signal wiring ........................................................ 64

RS-485................................................................................ 64

PCI-1610/1612 .................................................................. 65

PCI-1620 ............................................................................ 66

Wiring ................................................................................... 68

RS-232 signal wiring ........................................................ 68

Terminal or PC (DTE) connections........................................................... 68

Modem connections ................................................................................... 69

Terminal without handshake....................................................................... 69

RS-422 signal wiring ........................................................ 70

Terminator Resistors setup ............................................... 70

RS-485 signal wiring ........................................................ 71

Termination resistor setup................................................. 72

Chapter 1 Introduction 1

Introduction

CHAPTER

2PCI Comm Card Series User's Manual

Description

The PCI Local Bus is a high-performance bus that provides a proces-

sor-independent data path between the CPU and high-speed peripher-

als. PCI is a robust interconnect mechanism designed specifically to

accommodate multiple high performance peripherals for series

communication, SCSI, LAN, etc.

Advantech serial communication cards leverages the " Plug and Play

" capability defined in the PCI 2.1 bus specification. The board

requires only one PCI slot within the personal computer and provides

independent serial channels. All channels are addressed in a continu-

ous 32 byte I/O block for simplified software access. And, all channels

may also share one PCI interrupt. An interrupt status register is

available for determining the interrupt source.

The Advantech PCI communication card comes standard with

16PCI954 UARTs containing 128 byte FIFOs which are available as

an option. These upgraded FIFOs greatly reduce CPU overhead and

are an ideal choice for heavy multitasking environments.

16PCI954

The 16PCI954 is a high performance Quad UART with an on-chip PCI

interface. Targeted at PCI-based serial and parallel expansion cards,

PCI-architecture computer systems and embedded applications, the

16PCI954 integrates a PCI bus interface together with four of 16C950

high performance UARTs, a bi-directional parallel port and a local

bus bridge function. This single-chip solution replaces five or more

integrated circuits used in today products, giving performance, cost

and size advantages for new designs.

Features

•PCI Specification 2.1 compliant

•Speeds up to 921.6 Kbps

•16C954/950 UARTs with 128-byte standard

•Standard Industrial Board size

•I/O address automatically assigned by PCI Plug-and-Play

Chapter 1 Introduction 3

•OS supported: Windows NT, Windows 95, Windows 98

•Optional surge protection

•Optionalisolationprotection for RS-422/485

•Interrupt status register for increased performance

•Space reserved for termination resistors

•AutomaticRS-485data flow control

Specifications

•BusInterface: PCI bus specification 2.1 compliant

•IRQ: all ports use the same IRQ assigned by PCI Plug-and-Play

•Databits:5,6,7,8

•Stopbits:1,1.5,2

•Parity: none, even, odd

•Communicationcontroller:

16PCI954+16C954forPCI-1620A/B

16PCI954 for PCI-1610A/B, PCI-1612A/B

16PCI954 for PCI-1601A/B, 1602A/B

•Speed (bps) : 50 ~ 921.6 K

•Data signals:

TxD, RxD,RTS, CTS,DTR, DSR,DCD, GND(for RS-232)

RI(forPCI-1610)

TxD,RxD, RTS,CTS(for RS-422)

4PCI Comm Card Series User's Manual

Typical Max

PCI-1620 120 mA (+12 V) 150 mA (+12 V)

180 mA (+5 V) 220 mA (+5 V)

PCI-1610 60 mA (+12 V) 80 mA (+12 V)

150 mA (+5 V) 180 mA (+5 V)

PCI-1601 220 mA 270 mA

PCI-1602 250 mA 300 mA

PCI-1612 60 mA (+12 V) 80 mA (+12 V)

270 mA (+5 V) 340 mA (+5 V)

•Powerrequirement:

• Dimensions: 185 mm x 100 mm (for PCI-1612/1620)

123 mm x 92 mm (for PCI-1601/1602/1610)

•Operating temperature: 0o~ 65oC (referring to IEC

68-2-1, 2)

•Operating Humidity: 5 ~ 95% Relative Humidity, non-condensing

(referring to IEC 68-2-1, 2)

•Operating Humidity: 5 ~ 95% Relative Humidity, non-condensing

(referring to IEC 68-2-3)

•Storage Temperature: -25 ~ 85oC

Chapter 1 Introduction 5

Ordering Information

PCI-1601A: 2-port RS-422/485 PCI Comm Card

PCI-1601B: 2-port RS-422/485 PCI Comm Card, w/surge protection

PCI-1602A: 2-port RS-422/485 PCI Comm Card. w/ isolation protection

PCI-1602B: 2-port RS-422/485 PCI Comm Card, w/isolation and

surge protection

PCI-1620A: 8-port RS-232 PCI Comm Card

PCI-1620B: 8-port RS-232 PCI Comm Card, w/surge protection

PCI-1610A: 4-port RS-232 PCI Comm Card

PCI-1610B: 4-port RS-232 PCI Comm Card, w/surge protection

PCI-1612A: 4-port RS-232/422/485 PCI Comm Card

PCI-1612B: 4-port RS-232/422/485 PCI Comm Card, w/surge protection

Series PCI-1601 PCI-1602 PCI-1610 PCI-1612 PCI-1620

A B A B A B A B A B

No. of Port 2 2 2 2 4 4 4 4 8 8

Interface RS-422/485 RS-422/485 RS-232 RS-232/422/

485 RS-232

Surge

Protection -2500

VDC -2500

VDC -3000

VDC N/A 2500

VDC -3000

VDC

Isolation

Protection - - 3000

VDC

3000

VDC ------

6PCI Comm Card Series User's Manual

Ce manuel convient aux modèles suivants

Autres manuels Advantech Carte PCI

Advantech

Advantech PCI-1710U Manuel utilisateur

Advantech

Advantech PCI-1625U Manuel utilisateur

Advantech

Advantech PCI-1762 Manuel utilisateur

Advantech

Advantech PCI-1713U Manuel utilisateur

Advantech

Advantech PCI-1737U Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1752USO Manuel d'installation et d'exploitation

Advantech

Advantech MIC-3716 Manuel utilisateur

Advantech

Advantech PCA-6008G2 Manuel utilisateur

Advantech

Advantech PCIE-1758 Series Manuel utilisateur

Advantech

Advantech UNO-P166 Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1824 Manuel utilisateur

Advantech

Advantech MIC-3640 Manuel utilisateur

Advantech

Advantech EKI-6340 Series Manuel utilisateur

Advantech

Advantech DVP-7636HE Manuel utilisateur

Advantech

Advantech PCIE-1765 Manuel utilisateur

Advantech

Advantech PCIE-1750U Manuel utilisateur

Advantech

Advantech PCI-1723 Manuel utilisateur

Advantech

Advantech PCI-1723 Manuel d'installation et d'exploitation

Advantech

Advantech PCIE-1174 Manuel utilisateur

Advantech

Advantech PCI-1243U Manuel utilisateur

Advantech

Advantech PCI-1780 Manuel utilisateur

Advantech

Advantech PCIE-1805 Manuel utilisateur

Advantech

Advantech PCI-1734 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1602UP Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur