Advantech PCI-1737U Manuel utilisateur

PCI-1737U/1739U

24/48 Channel Digital

I/O Output Card

User Manual

PCI-1737U/PCI-1739U User Manual ii

The documentation and the software included with this product are copy-

righted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

Part No. 2003173700 1st Edition

Printed in Taiwan April 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

PCI-1737U/PCI-1739U User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

This product has passed the CE test for environmental specifications. Test

conditions for passing included the equipment being operated within an

industrial enclosure. In order to protect the product from being damaged

by ESD (Electrostatic Discharge) and EMI leakage, we strongly recom-

mend the use of CE-compliant industrial enclosure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

FCC Class B

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The PCI-1737U/PCI-1739U has passed the FM certification. According

to the National Fire Protection Association, work sites are classified into

different classes, divisions and groups, based on hazard considerations.

PCI-1737U/PCI-1739U is compliant with the specifications of Class I,

Division 2, Groups A, B, C and D indoor hazards.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

PCI-1737U/PCI-1739U User Manual vi

Packing List

Before setting up the system, check that the items listed below are

included and in good condition. If any item does not accord with the

table, please contact your dealer immediately.

• PCI-1737U/PCI-1739U card

• Companion CD-ROM (Device Drivers included)

• This User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning.

Use a damp cloth. Do not use liquid or spray detergents for clean-

ing.

4. For plug-in equipment, the power outlet socket must be located

near the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Drop-

ping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before con-

necting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or elec-

trical shock.

13. Never open the equipment. For safety reasons, the equipment

should be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

vii

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

The sound pressure level at the operator's position according to IEC 704-

1:1982 is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the

products from damage.

1. To avoid electrical shock, always disconnect the power from your

PC chassis before you work on it. Don't touch any components on

the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card may

damage sensitive electronic components.

NOTE: Do not leave this equipment in an environment

where the storage temperature may go below

-20° C (-4° F) or above 60° C (140° F). This could

damage the equipment. The equipment should be

in a controlled environment.

CAUTION: Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equiva-

lent type recommended by the manufacturer, dis-

card used batteries according to the

manufacturer’s instructions.

PCI-1737U/PCI-1739U User Manual viii

ix Table of Contents

Contents

Chapter 1 General Information ...................................... 2

1.1 Features ............................................................................ 2

1.2 Applications ..................................................................... 3

1.3 Installation Guide .............................................................. 3

Figure 1.1:Installation Flow Chart ................................. 4

1.4 Software Overview............................................................ 5

1.5 Device Driver Programming Roadmap............................. 6

1.5.1 Programming Tools ....................................................... 6

1.5.2 Programming with Device Drivers Function Library .... 7

1.5.3 Troubleshooting Device Drivers Error .......................... 7

1.6 Accessories........................................................................ 7

Chapter 2 Installation ..................................................... 10

2.1 Unpacking ....................................................................... 10

2.2 Driver Installation ........................................................... 11

Figure 2.1: Advantech Automation Software Setup .... 12

Figure 2.2:Different Options for Driver Setup ............ 12

2.3 Hardware Installation ...................................................... 13

2.4 Device Configuration ...................................................... 14

Figure 2.3:The Device Manager Dialog Box ............... 14

Figure 2.4:The Device Setting Dialog Box ................. 15

Figure 2.5:Digital Input Test Utility ............................ 15

Chapter 3 Signal Connections ........................................ 18

Figure 3.1:PCI-1737U Board Layout .......................... 18

Figure 3.2:PCI-1739U Board Layout .......................... 19

3.1 Switch and Jumper Settings ............................................ 19

3.1.1 Port Status Setting ........................................................ 20

Table 3.1:Port Status Setting ....................................... 20

3.1.2 Output Status Setting ................................................... 20

Table 3.2:Output Status Setting ................................... 20

3.1.3 BoardID Setting ........................................................... 21

Table 3.3:BoardID Setting ........................................... 21

3.2 Signal Connections.......................................................... 21

3.2.1 Pin Assignment For PCI-1737U .................................. 21

Figure 3.3:Connector 1 ................................................ 22

Figure 3.4:Connector 2 & 3 (Optional) ....................... 23

3.2.2 I/O Connector Signal Description For PCI-1737U ...... 23

Table 3.4:I/O Connection signal Description .............. 23

3.2.3 Pin Assignment For PCI-1739U .................................. 24

Figure 3.5:PCI-1739U Pin Assignments ..................... 24

3.2.4 I/O Connector Signal Description For PCI-1737U ...... 24

Table 3.5:I/O Connection signal Description .............. 24

Chapter 4 Operation ....................................................... 26

MIC-3780 User Manual x

4.1 Configuration ................................................................. 26

4.2 8255 Mode 0 Function Definitions ................................ 26

4.2.1 Interrupt Function of the DIO Signals ......................... 27

4.2.2 Input/Output Control .................................................... 27

Table 4.1:Bit map of port configuration register ......... 27

4.2.3 Initial Configuration .................................................... 28

4.3 Interrupt Handling .......................................................... 28

4.3.1 IRQ Level .................................................................... 28

4.3.2 Interrupt Control Register (Base + 8) .......................... 28

Table 4.2:Interrupt control register bit map ................. 28

4.3.3 Interrupt Source Control .............................................. 29

Table 4.3:Interrupt mode bit values ............................. 29

4.3.4 Interrupt Triggering Edge Control ............................... 29

Table 4.4:Triggering edge control bit values ............... 29

4.3.5 Interrupt Flag Bit ......................................................... 30

Table 4.5: Interrupt flag bit values ............................... 30

Appendix A Specifications ................................................. 32

A.1 PCI-1737U ...................................................................... 32

A.2 PCI-1739U ...................................................................... 33

Appendix B Function Block............................................... 36

Figure B.1:PCI-1737U ................................................. 36

Figure B.2:PCI-1739U ................................................. 36

Autres manuels pour PCI-1737U

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Carte PCI

Advantech

Advantech PCI-1712 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1752USO Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1752USO Manuel utilisateur

Advantech

Advantech PCI-1723 Manuel utilisateur

Advantech

Advantech PCI-COMM Series Manuel utilisateur

Advantech

Advantech PCI-1671UP Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1710U-DE Manuel utilisateur

Advantech

Advantech PCIE-1753 Manuel utilisateur

Advantech

Advantech MIC-5602 Manuel utilisateur

Advantech

Advantech DVP-7635HE Manuel utilisateur

Advantech

Advantech PCIE-1758 Series Manuel utilisateur

Advantech

Advantech DVP-7014HE Manuel utilisateur

Advantech

Advantech PCIE-1762H Manuel utilisateur

Advantech

Advantech PCI-1758 Series Manuel utilisateur

Advantech

Advantech PCI-1602UP Manuel utilisateur

Advantech

Advantech PCA-5650 Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1710U Manuel d'installation et d'exploitation

Advantech

Advantech PCM-28P1AD Manuel d'installation et d'exploitation

Advantech

Advantech PCI-1761 Manuel utilisateur

Advantech

Advantech AIMB-228 Manuel utilisateur

Advantech

Advantech PCA-6008VG Manuel utilisateur

Advantech

Advantech PCL-730 Manuel utilisateur

Advantech

Advantech PCI-1751 Manuel utilisateur

Advantech

Advantech PCIE-1750U Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur