Advantech ADAM-6520 Series Manuel utilisateur
Preface and Table of Contents
ADAM-6520
5-port Industrial 10/100 Mbps Ethernet
Switch
ADAM-6520 manual
Copyright Notice
This document is copyrighted, 2001, by Advantech Co., Ltd. All rights
are reserved. Advantech Co., Ltd., reserves the right to make improve-
ments to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this manual
is intended to be accurate and reliable. However, Advantech Co., Ltd.
assumes no responsibility for its use, nor for any infringements upon
the rights of third parties which may result from its use.
CE Notification
The ADAM-6520 has passed the CE test for environmental specifica-
tions. Test conditions for passing included the equipment being
operated within an industrial enclosure. In order to protect the
ADAM-6520 system from being damaged by ESD (Electrostatic
Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
Part No. 2003651000 1stEdition
PrintedTaiwan Oct 2001
Preface and Table of Contents
Advantech Customer Services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the unusual and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our number one concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So
if you run into technical difficulties, we are here to help. For most
frequently asked questions you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
Please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem and,
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.
ADAM-6520 manual
Product Warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two years from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by other than repair personnel authorized by
Advantech, or which have been subject to misuse, abuse, accident or
improper installation. Advantech assumes no liability as a conse-
quence of such events under the terms of this Warranty.
Because of Advantech’s high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product ever does prove defective, it will be repaired or
replaced at no charge during the warranty period. For out-of-warranty
repairs, you will be billed according to the cost of replacement materi-
als, service time and freight. Please consult your dealer for more
details.
If you think you have a defective product, follow these steps:
1.Collect all the information about the problem encountered (e.g. type
of PC, CPU speed, Advantech products used, other hardware and
software used etc.). Note anything abnormal and list any on-screen
messages you get when the problem occurs.
2.Call your dealer and describe the problem. Please have your manual,
product, and any helpful information readily available.
3.If your product is diagnosed as defective, you have to request an
RMA number. When requesting an RMA (Return Material Authori-
zation) number, please access ADVANTECH’s RMA website: http://
www.advantech.com.tw/rma. If the web sever is shut down, please
contact our office directly. You should fill in the “Problem Repair
Form”,describing in detail the application environment, configura-
tion, and problems encountered. Note that error descriptions such as
“does not work” and “failure” are so general that we are then
required to apply our internal standard repair process.
4. Carefully pack the defective product, a completely filled-out Repair
and Replacement Order Card and a photocopy of dated proof of
purchase (such as your sales receipt) in a shippable container. A
Preface and Table of Contents
product returned without dated proof of purchase is not eligible for
warranty service.
5.Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
ADAM-6520 manual
Contents
Chapter 1: Overview ........................................ 1
1.1 Introduction ....................................................................... 2
1.2 Features ............................................................................. 3
1.3 Specification ...................................................................... 4
1.4 Package Checklist ............................................................ 4
Chapter 2: Installation ..................................... 5
2.1 Top / Front / Rear View ..................................................... 6
2.2 Connecting the Hardware ................................................ 8
2.2.1 Choosing a Location ........................................................... 8
2.3 Network Connection ........................................................ 11
2.3.1 Connection to the devices ................................................ 11
2.3.2 Connection to other Hubs or Switch ................................. 11
2.3.3 Power Connection ............................................................ 12
Preface and Table of Contents
Figure
Figure 2-1 ADAM-6520Top Panel ............................................................... 7
Figure 2-2 ADAM-6520Front Panel ............................................................. 7
Figure 2-3 ADAM-6520Rear Panel ............................................................. 7
Figure 2-4 Panel Mounting ............................................................................. 8
Figure 2-5 Din Rail Mounting .......................................................................... 9
Figure 2-6 Piggyback Stack ......................................................................... 10
ADAM-6520 manual
Tables
Table2-1: ADAM-6520 LED Definition ............................................................ 6
1
Chapter
Overview
2ADAM-6520 manual
1.1Introduction
TheADAM-6520isa five ports industrial-grade 10/
100 Mbps Ethernet Switch. It allows you to expand
yourindustrialnetworkfastandcost-effectively.The
ADAM-6520is a 5-port 10/100 Mbps switch, which
connects to 5 workstations and auto-sense either
10Mbps or 100Mbps.Moreover,ADAM-6520 sup-
portsautocrossovertomakeitflexiblenetworkingen-
vironment,connectingtonetwork byanyport.
TheADAM-6520 provides three ways to befixed in
anyindustrialenvironments:DINRail,panel,piggyback
mounting. The ADAM-6520 also supplied +10~30
VDCoperatingvoltageover theterminalblock.Inad-
dition, the operating temperature of ADAM-6520 is
from -10 ~ 70°C. The above functions makes the
ADAM-6520 more stable and reliable. Thus, the
ADAM-6520isespeciallysuitableforindustrialenvi-
ronmentwithEthernetnetworking:semi-conductorfac-
tory,inventory,conveyerandmore.
Flexiblenetworkconnecting
ADAM-6520supportsautocrossovertomakeitflex-
iblenetworkingenvironment.
Withthefunction,ADAM-6520anyportcanuplinkto
switchor hubdevicesby eitherstraightthrough cable
orcrossover cable.Unlike other switches , itprovides
userswitheasyandflexiblenetworkconnecting.
Flexiblemounting
Duetoitsversatilityandinnovativedesign,theADAM-
6520 can be fixed in three ways: DIN rail, panel and
piggybackmounting.
Autres manuels pour ADAM-6520 Series
2
Table des matières
Autres manuels Advantech Routeur réseau
Advantech
Advantech SL305 Manuel utilisateur
Advantech
Advantech SmartMotion ST355 Manuel utilisateur
Advantech
Advantech UR5i v2 Libratum Manuel utilisateur
Advantech
Advantech UR5i v2 Libratum Instructions d'installation et d'utilisation
Advantech
Advantech ICR-2441 Manuel utilisateur
Advantech
Advantech B+B SmartWorx SE416 Manuel utilisateur
Advantech
Advantech ICR-2432 Manuel utilisateur
Advantech
Advantech SmartFlex SR300 Manuel utilisateur
Advantech
Advantech ICR-4401 Manuel utilisateur
Advantech
Advantech EKI-2726FHPI Series Manuel d'installation et d'exploitation
Advantech
Advantech ICR-2041 Manuel utilisateur
Advantech
Advantech ICR-2701 Manuel utilisateur
Advantech
Advantech SmartFlex SR306 Manuel utilisateur
Advantech
Advantech ICR-3232 Manuel utilisateur
Advantech
Advantech XR5i v2 Manuel utilisateur
Advantech
Advantech ICR-1601 Manuel utilisateur
Advantech
Advantech ICR-3201 Series Manuel utilisateur
Advantech
Advantech ICR-3831 Mode d’emploi
Advantech
Advantech ICR-3241 Manuel utilisateur
Advantech
Advantech SmartFlex SR305 Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité