Advantech PCM-9570/S Manuel utilisateur

PCM-9570/S

Socket 370 Celeron™/Pentium®III

SBC with LCD, Ethernet and SCSI

User's Manual

This document is copyrighted, 2000. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, or for any in-

fringements upon the rights of third parties that may result from its

use.

Part No. 2006957006 5th Edition

Printed in Taiwan Feb. 2001

Acknowledgments

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International

Business Machines Corporation.

Intel, Celeron, Pentium and Pentium II are trademarks of Intel

Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

Symbios is a trademark of Symbios Inc.

Trident is a trademark of Trident Microsystems, Inc.

UMC is a trademark of United Microelectronics Corporation.

Windbond is a trademark of Winbond Electronics Corp.

All other product names or trademarks are properties of their respec-

tive owners.

For more information on this and other Advantech products please

visit our websites at: http://www.advantech.com

http://www.advantech.com/epc

For technical support and service for please visit our support website

at: http://support.advantech.com

This manual is for the PCM-9570S Rev. B1 & Rev. B2.

Packing list

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCM-9570/S all-in-one single board computer

• 1 CD disc with utility and drivers

• 1 Startup Manual

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Please refer to Appendix E for the optional interface wiring kit.

Contents

Chapter 1 General Information ....................... 1

1.1 Introduction........................................................................2

Highly integrated Socket 370 SBC ......................................2

1.2 Features...............................................................................3

1.3 Specifications ......................................................................3

Standard SBC functions .......................................................3

PCI SVGA/flat panel interface ............................................4

PCI bus Ethernet interface ...................................................5

Ultra2 SCSI (PCM-9570S only) ..........................................5

Solid state disk .....................................................................5

PanelLink (optional) ............................................................5

Mechanical and environmental ............................................5

1.4 Board layout and dimensions............................................6

Chapter 2 Installation....................................... 7

2.1 Jumpers...............................................................................8

2.2 Connectors ..........................................................................9

2.3 Locating jumpers .............................................................10

2.4 Locating connectors .........................................................11

2.4.1 Component side ........................................................11

2.4.2 Solder side.................................................................12

2.5 Setting jumpers ................................................................13

2.6 CPU installation and upgrading .....................................14

2.6.1 Installing a CPU in the ZIF socket............................14

2.6.2 CMOS clear (J1) .......................................................15

2.6.3 Buzzer enable/disable (J9) ........................................15

2.7 Installing DRAM (SODIMMs) .......................................16

2.7.1 Introduction...............................................................16

2.7.2 Installing SODIMMs ................................................16

2.8 IDE hard drive connector (CN11) ..................................16

2.8.1 Connecting the hard drive .........................................17

2.9 Floppy drive connector (CN9) ........................................17

2.9.1 Connecting the floppy drive......................................18

2.10 Parallel port connector (CN12).......................................18

2.11 Keyboard and PS/2 mouse connector (CN5) .................19

2.12 Front panel connector (CN18) ........................................19

2.12.1 Speaker....................................................................19

2.12.2 LED interface..........................................................19

2.12.3 Watchdog output .....................................................19

2.12.4 Reset switch ............................................................20

2.13 Power connectors (FAN1, CN14, CN6) ..........................20

2.13.1 Peripheral power connector, -5 V, -12 V (CN14)...20

2.13.2 Main power connector, +5 V, +12 V (CN6)...........20

2.13.3 Fan power supply connector (FAN1) .....................20

2.14 ATX power control connector (CN2, J4) .......................21

2.14.1 ATX feature connector (CN2) and power button

(J4) .....................................................................................21

2.15 ATX power on function select (J11) ...............................22

2.16 IR connector (CN8)..........................................................22

2.17 COM-port connector (CN20)..........................................22

2.17.1 COM2 RS-232/422/485 setting (J10) .....................22

2.17.2 COM3/COM4 RI pin setting (J6) ...........................23

2.18 VGA interface connections..............................................26

2.18.1 CRT display connector (CN15) ..............................26

2.18.2 Flat panel display connector (CN16) ......................26

2.18.3 Ext. flat panel display connector (CN17) ...............26

2.18.4 Panel type select (SW1) ..........................................27

2.19 Ethernet configuration ....................................................28

2.19.1 100Base-T connector (CN1) ...................................28

2.19.2 Network boot...........................................................28

2.19.3 LAN controller power select (J12) .........................28

2.20 Watchdog timer configuration .......................................29

2.20.1 Watchdog timer action (J2).....................................29

2.21 USB connectors (CN19) ...................................................29

2.22 SCSI connectors (CN4)....................................................30

2.23 PanelLink (CN22) (optional)...........................................30

Chapter 3 Software Configuration................ 31

3.1 Introduction......................................................................32

3.2 Ethernet software configuration.....................................33

Chapter 4 Award BIOS Setup........................ 35

4.1 System test and initialization ..........................................36

4.1.1 System configuration verification.............................36

4.2 Award BIOS setup ...........................................................37

4.2.1 Entering setup ...........................................................37

4.2.2 Standard CMOS setup...............................................38

4.2.3 BIOS features setup ..................................................39

4.2.4 Chipset features setup ...............................................40

4.2.5 Power management setup .........................................41

4.2.6 PnP/PCI configuration ..............................................42

4.2.7 Integrated peripherals ...............................................43

4.2.8 Load BIOS defaults...................................................44

4.2.9 Change password ......................................................45

4.2.10 Auto detect hard disk ..............................................46

4.2.11 Save & exit setup ....................................................46

4.2.12 Exit without saving .................................................46

Chapter 5 PCI SVGA Setup ........................... 47

5.1 Introduction......................................................................48

5.1.1 Chipset ......................................................................48

5.1.2 Display memory........................................................48

5.1.3 Display types.............................................................48

5.1.4 Dual/simultaneous display ........................................49

5.2 Installation of SVGA driver............................................50

5.2.1 Installation for Windows 95/98 ................................51

5.2.2 Installation for Windows NT ....................................54

5.3 Further information.........................................................57

Chapter 6 SCSI Setup and Configurations .. 59

6.1 Introduction......................................................................60

6.2 Before you begin...............................................................61

6.3 Basic rules for SCSI host adapter and device

installation........................................................................61

6.4 Configuring the SCSI adapter ........................................62

6.5 SCSI terminators .............................................................63

6.6 SDMS drivers ...................................................................64

6.7 Utility user's guide and installation instructions ..........65

6.8 Driver and utility installation .........................................67

Chapter 7 PCI Bus Ethernet Interface .......... 69

7.1 Introduction......................................................................70

7.2 Installation of Ethernet driver........................................70

7.2.1 Installation for MS-DOS and Windows 3.1..............70

7.2.2 Installation for Windows 95/98 ................................71

7.2.3 Installation for Windows NT ....................................73

7.3 Further information.........................................................75

Appendix A Programming the Watchdog

Timer .......................................... 77

A.1 Programming the watchdog timer .................................78

Appendix B Installing PC/104 Modules........ 81

B.1 Installing PC/104 modules...............................................82

Appendix C Pin Assignments ....................... 85

C.1 Ethernet 10/100Base-T connector (CN1) .......................86

C.2 ATX power feature connector (CN2) .............................86

C.3 SCSI Connector (CN4) ....................................................87

C.4 Keyboard and PS/2 mouse connector (CN5) .................89

C.5 Main power connector (CN6) .........................................90

C.6 IR connector (CN8)..........................................................90

C.7 Floppy drive connector (CN9) ........................................91

C.8 IDE hard drive connector (CN11) ..................................92

C.9 Parallel port connector (CN12).......................................93

C.10 Backlight connector (CN13)............................................94

C.11 Peripheral power connector (CN14) ..............................94

C.12 CRT display connector (CN15).......................................95

C.13 24-bit LCD display connector (CN16)............................96

C.14 Ext. LCD display connector (CN17)...............................97

C.15 LCD signal mapping ........................................................98

C.16 Front panel connector (CN18) ........................................99

C.17 USB connectors (CN19) ...................................................99

C.18 COM port connector (CN20) ........................................100

C.19 CompactFlash card connector (CN21).........................102

C.20 PanelLink connector (CN22).........................................103

C.21 Fan power connector (FAN1)........................................104

Appendix D System Assignments.............. 105

D.1 System I/O ports.............................................................106

D.2 1st MB memory map .....................................................107

D.3 DMA channel assignments ............................................107

D.4 IRQ mapping chart........................................................108

Appendix E Optional Extras........................ 109

E.1 PCM-10586-4 cable kit for PCM-9570/S .....................110

E.2 USB cable ........................................................................111

E.3 SCSI cables .....................................................................111

E.4 24-bit LCD cable adapter ..............................................111

Appendix F Mechanical Drawings .............. 113

F.1 Component side ..............................................................114

F.2 Solder side.......................................................................115

Tables

Table 2-1: Jumpers..............................................................................8

Table 2-2: Connectors .........................................................................9

Table 2-3: CMOS clear (J1)...............................................................15

Table 2-4: Buzzer enable/disable (J9) ...............................................15

Table 2-5: ATW power on function select (J11) .................................22

Table 2-6: COM2 RS-232/422/485 setting (J10)................................23

Table 2-7: Serial port default settings ................................................23

Table 2-8: COM1 RI pin setting (J6) ..................................................24

Table 2-9: COM2 RI pin setting (J6) ..................................................24

Table 2-10: COM3 RI pin setting (J6) ................................................25

Table 2-11: COM4 RI pin setting (J6) ................................................25

Table 2-12: Panel type select (SW1) .................................................27

Table 2-13: LAN controller power select (J12)...................................28

Table 2-14: Watchdog timer action (J2).............................................29

Table B-1: PC/104 connectors (CN10) ..............................................84

Table C-1: Ethernet 10Base-T connector (CN1)................................86

Table C-2: ATX power feature connector (CN2) ................................86

Table C-3: SCSI connector (CN4) .....................................................87

Table C-3: SCSI connector (CN4) [continued] ...................................88

Table C-4: Keyboard and mouse connector (CN5)............................89

Table C-5: Main power connector (CN6) ...........................................90

Table C-6: IR connector (CN8) ..........................................................90

Table C-7: Floppy drive connector (CN9) ..........................................91

Table C-8: IDE hard drive connector (CN11) ....................................92

Table C-9: Parallel port connector (CN12).........................................93

Table C-10: Backlight connector (CN13) ...........................................94

Table C-11: Peripheral power connector (CN14)...............................94

Table C-12: CRT display connector (CN15) ......................................95

Table C-13: 24-bit LCD display connector (CN16).............................96

Table C-14: Ext. LCD display connector (CN17) ...............................97

Table C-15: LCD signal mapping.......................................................98

Table C-16: Front panel connector (CN18)........................................99

Table C-17: USB connectors (CN19).................................................99

Table C-18: COM port connector (CN20) ........................................100

Table C-19: COM2 port for RS-232, RS-422 and RS-485 (CN20)...101

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Carte mère

Advantech

Advantech AIMB-308 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-212 Manuel utilisateur

Advantech

Advantech SOM-7567 Manuel utilisateur

Advantech

Advantech RSB-4410 Manuel utilisateur

Advantech

Advantech PCM-9374 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-330F Manuel utilisateur

Advantech

Advantech AIMB-208 Manuel utilisateur

Advantech

Advantech ASR-1000K-00A1E Manuel d'installation et d'exploitation

Advantech

Advantech PCM-9588 Manuel d'installation et d'exploitation

Advantech

Advantech EAX-R680RP Manuel utilisateur

Advantech

Advantech PCM-9581 Manuel utilisateur

Advantech

Advantech PCE-5125 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-285 Manuel utilisateur

Advantech

Advantech ROM-DB5901 Manuel utilisateur

Advantech

Advantech MIO-2261 Manuel d'installation et d'exploitation

Advantech

Advantech MIOe-DB2000 Manuel utilisateur

Advantech

Advantech PCE-5129 Manuel d'installation et d'exploitation

Advantech

Advantech PPC-MB-610 Manuel d'installation et d'exploitation

Advantech

Advantech AIMB-U117 Manuel utilisateur

Advantech

Advantech PCE-5026 Manuel utilisateur

Advantech

Advantech PCA-6781 Manuel utilisateur

Advantech

Advantech EmbCore ROM-7421 Manuel utilisateur

Advantech

Advantech WISE-DB1500 Manuel utilisateur

Advantech

Advantech AIMB-213 Manuel d'installation et d'exploitation

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur