Advantech PCA-6168 Manuel utilisateur
PCA-6168
Full-size socket 370 Intel
Celeron®processor-based
PCI/ISA-bus CPU card
Copyright notice
This document is copyrighted, 1999, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties which may result from its
use.
Acknowledgements
• AWARD is a trademark of AWARD Software, Inc.
• IBM and PC are trademarks of International Business Machines
Corporation.
• Intel and Celeron are trademarks of Intel Corporation.
• MS-DOS is a trademark of Microsoft Corporation.
• SMC is a trademark of Standard Microsystems Corporation.
• WinBond is a trademark of Winbond Corporation.
• SYMBIOS is a registered trademark of Symbios, Inc.
• ATI is a registered trademark of ATI Technologies, Inc.
All other product names or trademarks are the properties of their
respective owners.
Part No. 2006616800
1st Edition Printed in Taiwan May 1999
A Message to the Customer
Advantech customer services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the installation
and operation of any of our products.
PCA-6168 Series comparison table
Model PCA-6168L PCA-6168 PCA-6168E PCA-6168S PCA-6168F
CPU: Intel Celeron socket 370 üüüüü
System chipset: Intel 440 BX üüüüü
BIOS: Award P&P Flash BIOS üüüüü
L2 cache: 128 KB (on CPU) üüüüü
Max. system RAM: 768 MB
(3 x 168-pin DIMM sockets) üüüüü
ISA High Drive: Up to 64 mA üüüüü
USB port üüüüü
2 EIDE connectors üüüüü
Solid state disk: Supports M-Systems'
DOC®2000 Flash disk up to 144 MB üüüüü
2 serial, 1 parallel ports üüüüü
VGA: AGP/VGA (ATI3D Rage Pro Turbo) üü üü
LAN: 10/100Base-T Ethernet
(Intel 82558 chipset) üü
SCSI: 32-bit PCI Ultra2 SCSI
(SYMBIOS 53C895 chipset) üü
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
If an Advantech product is defective, it will be repaired or replaced at
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, type of PC, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and list
any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
material authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Initial Inspection
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCA-6168 socket 370 Intel Celeron®processor-based single board
computer
• 1 Intel Celeron®processor, and 1 cooling fan (optional)
• 1 PCA-6168 User's Manual
• 4 utility disks/CD with VGA BIOS (PCA-6168/6168E/6168S/
6168F only)
• 2 Ethernet driver disks/CD (PCA-6168E/6168F only)
• 1 SCSI driver disk/CD (PCA-6168S/6168F only)
• 1 bus master utility driver/CD
• 2 disks/CD for OBS Win95 drivers
• 1 FDD cable
• 2 EIDE HDD cables
• 1 printer (parallel port) cable
• 1 temperature sensor cable
• 1 ivory cable for keyboard and mouse
• 1 SCSI cable (PCA-6168F/6168S only)
• 1 USB cable (optional)
• 1 ATX-to-PS/2 power cable
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
We have carefully inspected the PCA-6168 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the PCA-6168, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or
your local sales representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for inspection by the
carrier. After inspection, we will make arrangements to repair or
replace the unit.
Contents
Chapter 1 Hardware Configuration.............................. 1
1.1 Introduction........................................................................2
1.2 Features...............................................................................3
1.3 Specifications ......................................................................4
1.3.1 System.........................................................................4
1.3.2 Memory.......................................................................4
1.3.3 Input/Output ................................................................4
1.3.4 VGA interface
(PCA-6168/6168E/6168S/6168F only) ......................5
1.3.5 SCSI interface (PCA-6168S/6168F only)...................5
1.3.6 Ethernet LAN (PCA-6168E/6168F only) ...................5
1.3.7 Industrial features .......................................................5
1.3.8 Mechanical and environmental specifications............6
1.4 Board Layout: Main Features ..........................................7
1.5 Jumpers and Connectors...................................................8
1.6 Board Layout: Jumper and Connector Locations ........10
1.7 Safety Precautions............................................................11
1.8 Jumper Settings................................................................12
1.8.1 How to set jumpers ...................................................12
1.8.2 CPU clock ratio setting (SW1) .................................12
1.8.3 CMOS clear (J1) .......................................................13
1.8.4 Watchdog timer output (J2) ......................................13
1.8.5 DiskOnChip®2000 Flash disk address select (J3)....14
1.9 System Memory................................................................16
1.9.1 Sample calculation: DIMM memory capacity..........16
1.9.2 Supplementary information about DIMMs ..............17
1.10 Memory Installation Procedures ....................................18
1.11 Cache Memory .................................................................18
1.12 CPU Installation ...............................................................19
Chapter 2 Connecting Peripherals ............................ 21
2.1 Primary (CN1) and Secondary (CN2) IDE Connectors22
2.2 Floppy Drive Connector (CN3).......................................23
2.3 Parallel Port Connector (CN4) .......................................23
2.4 SCSI Connector (CN5) ....................................................24
2.5 USB Connector (CN6) .....................................................25
2.6 VGA Connector (CN7) ....................................................25
2.7 Ethernet Connector (CN8) ..............................................26
2.8 Serial Ports (CN9: COM1; CN10: COM2)....................26
2.9 PS/2 Keyboard and Mouse Connector (CN11) .............27
2.10 External Keyboard Connector (CN12) ..........................27
2.11 IR Connector (CN13).......................................................28
2.12 CPU Fan Connector (CN14) ...........................................28
2.13 CPU Temperature Sensor (CN15)..................................28
2.14 Front Panel Connectors
(CN16, CN17, CN18, CN19 and CN21)..........................29
2.14.1 Keyboard lock and power on LED (CN16) ............29
2.14.2 External speaker (CN17).........................................29
2.14.3 Reset (CN18)...........................................................29
2.14.4 IDE LED (CN19) ....................................................30
2.14.5 ATX soft power switch (CN21)..............................30
2.15 ATX Power Control Connectors (CN20 and CN21).....30
2.15.1 ATX feature connector (CN20) and soft power
switch connector (CN21) ........................................30
2.15.2 Controlling the soft power switch...........................31
Chapter 3 Award BIOS Setup ..................................... 33
3.1 Introduction......................................................................34
3.2 Entering Setup..................................................................34
3.3 Standard CMOS Setup....................................................35
3.4 BIOS Features Setup .......................................................36
3.4.1 Virus Warning...........................................................36
3.4.2 Quick Power On Self Test ........................................37
3.4.3 Boot Sequence...........................................................37
3.4.4 Boot Up Floppy Seek ................................................38
3.4.5 Boot Up NumLock Status .........................................38
3.4.6 Gate A20 Option .......................................................38
3.4.7 Typematic Rate Setting.............................................38
3.4.8 Typematic Rate (Chars/Sec) .....................................38
3.4.9 Typematic Delay (msec) ...........................................39
3.4.10 Security Option .......................................................39
3.4.11 PCI/VGA Palette Snoop..........................................39
3.4.12 OS Select for DRAM > 64MB................................39
3.4.13 Video BIOS Shadow ...............................................39
3.4.14 C8000-CBFFF Shadow / DC000-DFFFF Shadow .40
3.5 CHIPSET Features Setup ...............................................40
3.5.1 SDRAM RAS to CAS Delay ....................................40
3.5.2 SDRAM RAS Precharge Time .................................41
3.5.3 SDRAM CAS Latency Time ....................................41
3.5.4 DRAM Data Integrity Mode .....................................41
3.5.5 16 Bit I/O Recovery Time / 8 Bit I/O Recovery
Time ..........................................................................41
3.5.6 Memory Hole At 15M-16M .....................................41
3.5.7 AGP Aperture Size (MB)..........................................41
3.6 Power Management Setup ..............................................42
3.6.1 Power Management ..................................................42
3.6.2 HDD Power Down ....................................................42
3.6.3 Soft-Off by PWR-BTTN...........................................43
3.7 PCI Configuration Setup.................................................43
3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................43
3.7.2 DMA-x assigned to : PCI/ISA PnP...........................44
3.7.3 Used MEM base addr : N/A......................................44
3.8 Load BIOS Defaults .........................................................44
3.9 Load Setup Defaults.........................................................44
3.10 Integrated Peripherals.....................................................45
3.10.1 IDE HDD Block Mode ...........................................45
3.10.2 IDE Primary Master/Slave PIO/UDMA Mode, IDE
Secondary Master/Slave PIO/UDMA Mode (Auto) 45
3.10.3 On-Chip PCI IDE Primary/Secondary....................45
3.10.4 Onboard FDC Controller ........................................46
Table des matières
Autres manuels Advantech Carte mère
Advantech
Advantech SOM-DB4400 Manuel utilisateur
Advantech
Advantech SIMB-U01 Manuel d'installation et d'exploitation
Advantech
Advantech UPGRD-KIT-48UXP Manuel utilisateur
Advantech
Advantech MIC-3392 Manuel utilisateur
Advantech
Advantech SMB-2501 Manuel utilisateur
Advantech
Advantech PCM-3363 Manuel utilisateur
Advantech
Advantech PCI-7031 Manuel utilisateur
Advantech
Advantech AIMB-580 Manuel utilisateur
Advantech
Advantech SIMB-A21 Manuel d'installation et d'exploitation
Advantech
Advantech SOM-7567 Manuel utilisateur
Advantech
Advantech AIMB-227 AMD Manuel utilisateur
Advantech
Advantech AIMB-787 Manuel utilisateur
Advantech
Advantech AIMB-540 Manuel utilisateur
Advantech
Advantech PCA-6009 Manuel utilisateur
Advantech
Advantech AIMB-287 Manuel utilisateur
Advantech
Advantech ASMB-586 Manuel utilisateur
Advantech
Advantech MIC-3351 Manuel d'installation et d'exploitation
Advantech
Advantech AIMB-788 Manuel utilisateur
Advantech
Advantech RS-200-RPS-D Manuel utilisateur
Advantech
Advantech AIMB-210 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
