Advantech AIMB-341 Manuel utilisateur
AIMB-341
Socket 775 Embedded ATX/
Micro ATX for Multimedia Appli-
cations
User Manual
AIMB-341 User Manual ii
Copyright
This document is copyrighted, © 2005. All rights are reserved. The origi-
nal manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
the original manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original manufacturer
assumes no responsibility for its use, nor for any infringements upon the
rights of third parties that may result from such use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective
owners.
For more information on this and other Advantech products, please visit
our websites at: http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our support website at:
http://www.advantech.com/support
This manual is for the AIMB-341.
Part No.2006034110 1st Edition
Aug. 2006
iii
Packing List
Before you begin installing your board, please make sure that the follow-
ing materials have been shipped:
• 1 AIMB-341 all-in one single board computer
• 1 startup manual
• 1 CD-ROM or disks for utility, drivers, and manual (in PDF format)
• 1 UDMA/66 IDE flat cable p/n:1701400452
• 1 COM2(W/485/422)cable p/n:1701140201
• 1 DMA/33 IDE 40 to 44pin IDE flat cable p/n:1701440350
• 1 I/O shield p/n:1960001955
• 4 COM port cable kit 18CM p/n:1701400181
• 1 USB cable p/n:1703100156
If any of these items are missing or damaged, contact your distributor or
sales representative immediately.
Optional Items:
• 1 USB cable (2.54mm) p/n:1700000719
• 1 DVI cable p/n:1700000410
• 1 FDD cable p/n:1701340700
• 1 SATA cable p/n:1700001054
• 1 COM3.4 cable 20pin (22CM) cable p/n:1701200220
AIMB-341 User Manual iv
Model No. List Description
AIMB-341F SKT 775 Pentium 4 SBC w/8USB/2LAN/
4COM/1PCI/1 EmbPCI
Additional Information and Assistance
Visit the Advantech web site at www.advantech.com where you can find
the latest information about the product.
Step 1. Contact your distributor, sales representative, or Advantech's
customer service center for technical support if you need addi-
tional assistance. Please have the following information ready
before you call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application
software, etc.)
• A complete description of the problem
• The exact wording of any error messages
v
FCC
This device complies with the requirements in
part 15 of the FCC rules: Operation is subject to
the following two conditions:
1.This device may not cause harmful interfer-
ence, and
2. This device must accept any interference
received, including interference that may cause
undesired operation
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio commu-
nications. Operation of this device in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his/her own expense. The
user is advised that any equipment changes or
modifications not expressly approved by the
party responsible for compliance would void the
compliance to FCC regulations and therefore,
the user's authority to operate the equipment.
Caution!
Achtung!
There is a danger of a new battery exploding if it
is incorrectly installed. Do not attempt to
recharge, force open, or heat the battery.
Replace the battery only with the same or equiv-
alent type recommended by the manufacturer.
Discard used batteries according to the manufac-
turer’s instructions.
vii Table of Contents
Contents
Chapter 1 General Information ........................................2
1.1 Introduction ....................................................................... 2
1.2 Features ............................................................................. 2
1.3 Specifications .................................................................... 3
1.3.1 Standard SBC Functions................................................. 3
1.3.2 Display Interface............................................................. 3
1.3.3 DVI ................................................................................. 4
1.3.4 Solid State Disk .............................................................. 4
1.3.5 PCI bus Ethernet interface .............................................. 4
1.3.6 Mechanical and Environmental ...................................... 4
1.4 Board Layout: dimensions ................................................ 5
1.5 Board Layout: dimensions (cont.)..................................... 6
Chapter 2 Installation ........................................................8
2.1 Jumpers.............................................................................. 8
Table 2.1:Jumpers........................................................... 8
2.2 Connectors......................................................................... 8
Table 2.2:Connectors ...................................................... 8
2.3 Locating Connectors (component side)........................... 10
2.4 Locating Connectors (solder side)................................... 11
2.5 Setting Jumpers ............................................................... 12
2.6 LVDS Panel Voltage select (JP2) .................................. 13
Table 2.3:LVDS Panel Voltage select(JP2).................. 13
2.7 COM2 (RS232/422/485)Select (JP5).............................. 13
Table 2.4:COM2 (RS232/422/485) Select (JP5) .......... 13
2.8 Clear RTC (J1) ................................................................ 14
Table 2.5:Clear RTC..................................................... 14
2.9 Installing DIMMs............................................................ 14
2.10 ATX power control connector (ATX1, ATX2) .............. 15
2.11 Printer port connector (CN5)........................................... 15
2.12 CompactFlash Card Socket ............................................. 15
2.12.1 CompactFlash(CN35) ................................................... 15
2.13 Floppy drive connector (CN33) ...................................... 16
2.13.1 Connecting the floppy drive ......................................... 16
2.14 IDE connector (CN32) .................................................... 16
2.14.1 Connecting the hard drive............................................. 17
2.15 VGA/LVDS interface connections.................................. 17
2.15.1 CRT display connector (CN4) ..................................... 17
2.15.2 LVDS panel connector(CN23) ..................................... 17
2.15.3 LCD inverter connector(CN21) .................................... 17
2.15.4 DVI connector (VCN2) ................................................ 17
AIMB-341 User Manual viii
2.16 USB connectors (CN9,CN10,CN25,CN26).................... 18
2.17 Ethernet configuration..................................................... 18
2.17.1 LAN connector (CN9, CN10)....................................... 18
2.18 Front Panel Connector (CN31) ....................................... 18
2.18.1 Reset (Pin13 & Pin14) ................................................. 18
2.18.2 HDD LED (Pin1 & Pin2).............................................. 18
2.18.3 Power LED (Pin 3 & Pin 4) .......................................... 19
2.18.4 Suspend LED (Pin 5 & Pin 6)....................................... 19
2.18.5 Power Button (Pin 11 & Pin12).................................... 19
2.18.6 LAN LED(Pin7, 8, 9, 10) ............................................. 19
2.19 COM port connector (CN1,CN16,CN28) ....................... 19
2.20 MINI PS/2, KB/Mouse connector (CN8)........................ 19
2.21 Audio Connector (CN6) .................................................. 19
2.22 DI/O connector (CN30).................................................. 20
2.23 SATA Connector (SA1, SA2, SA3, SA4)...................... 20
2.24 CD-In Connector (CN11)................................................ 20
2.25 SIR Connector (CN29).................................................... 20
2.26 SM Bus Connector (CN27) ............................................. 20
2.27 System and CPU Fan Conn. (FAN1 and FAN2) ............ 21
2.28 PCI,MINI PCI,and PCI-E X1 Conn
(PCI1,PCI2,CN34,PCIEX1)21
Chapter 3 Award BIOS Setup.........................................24
3.1 System test and initialization........................................... 24
3.1.1 System configuration verification................................. 24
3.2 Award BIOS setup .......................................................... 25
3.2.1 Entering setup .............................................................. 25
Figure 3.1:BIOS setup program initial screen .............. 25
3.2.2 Standard CMOS Features setup.................................... 26
Figure 3.2:Standard CMOS Features setup .................. 26
3.2.3 Advanced BIOS Features setup .................................... 27
Figure 3.3:Advanced BIOS Features setup................... 27
3.2.4 Advanced Chipset Features setup ................................. 28
Figure 3.4:Advanced Chipset Features setup ............... 28
3.2.5 Integrated Peripherals ................................................... 29
Figure 3.5:Integrated Peripherals.................................. 29
3.2.6 Power Management Setup ............................................ 30
Figure 3.6:Power Management Setup........................... 30
3.2.7 PnP/PCI Configurations................................................ 31
Figure 3.7:PnP/PCI Configurations .............................. 31
3.2.8 PC Health Status ........................................................... 32
Figure 3.8:PC Health Status.......................................... 32
3.2.9 Frequency/Voltage Control........................................... 33
Figure 3.9:Frequency/Voltage Control......................... 33
3.2.10 Load Optimized Defaults.............................................. 34
ix Table of Contents
Figure 3.10:Load BIOS defaults screen........................ 34
3.2.11 Set Password ................................................................. 34
Figure 3.11:Set password.............................................. 35
3.2.12 Save & Exit Setup......................................................... 36
Figure 3.12:Save to CMOS and EXIT.......................... 36
3.2.13 Exit Without Saving...................................................... 37
Figure 3.13:Quit without saving ................................... 37
Appendix A Programming GPIO & Watchdog Timer ....40
A.1 Supported GPIO Register................................................ 40
A.1.1 GPIO Registers ............................................................. 40
A.1.2 GPIO Example program-1 ........................................... 41
Appendix B Pin Assignments ............................................46
B.1 CRT Connector (CN4) .................................................... 46
Table B.1:CRT Connector (CN4)................................. 46
B.2 COM1 Connector (CN1)................................................. 46
Table B.2:COM1 Connector (CN1).............................. 46
B.3 LPT1 Connector(CN5) .................................................... 47
Table B.3:Primary IDE connector (CN5) ..................... 47
B.4 Audio Connector (CN6) .................................................. 48
Table B.4:Audio Connector (CN6)............................... 48
B.5 Keyboard + PS/2 Mouse Connector (CN8) .................... 48
Table B.5:Keyboard + PS/2 Mouse Connector (CN8) . 48
B.6 LAN2 USB3/4 Connector (CN9).................................... 49
Table B.6:LAN2 USB3/4 Connector (CN9)................. 49
B.7 LAN1 USB1/2 Connector(CN10)................................... 50
Table B.7:LAN1 USB1/ 2 Connector (CN10).............. 50
B.8 LVDS INVERTER Connector(CN21)............................ 50
Table B.8:LVDS INVERTER Connector (CN21) ....... 50
B.9 CD-IN Connector (CN11) ............................................... 51
Table B.9:CD-IN Connector (CN11)............................ 51
B.10 LVDS Connector (CN23)................................................ 52
Table B.10:LVDS Connector (CN23) .......................... 52
B.11 DVI Connector (VCN2) .................................................. 53
Table B.11:DVI Connector (VCN2)............................. 53
B.12 USB5/6/USB7/8 Connector (CN25, CN26).................... 54
Table B.12:USN5/6/USB7/8 Connector (CN25,CN26)54
B.13 SIR Connector (CN29).................................................... 54
Table B.13:SIR Connector (CN29) .............................. 54
B.14 Compact Flash Connector (CN35).................................. 55
Table B.14:Compact Flash Connector (CN35)............. 55
B.15 Primary IDE Connector(CN32) ...................................... 56
Table B.15:Primary IDE Connector (CN32) ................ 56
B.16 SM BUS Connector (CN27) ........................................... 57
AIMB-341 User Manual x
Table B.16:SM BUS Connector (CN27) ...................... 57
B.17 FDD Connector (CN33).................................................. 58
Table B.17:FDD Connector (CN33)............................. 58
B.18 COM2 Connector (CN28)............................................... 59
Table B.18:COM2 Connector (CN28).......................... 59
B.19 COM3~6 Connector (CN16)........................................... 60
Table B.19:COM3~6 Connector (CN16) ..................... 60
B.20 Digital IO Connector (CN30).......................................... 61
Table B.20:Digital IO Connector (CN30) .................... 61
B.21 Front Panel Connector(CN31) ........................................ 61
Table B.21:Front Panel Connector(CN31) ................... 61
B.22 MINI PCI Connector(CN34)........................................... 62
Table B.22:MINI PCI Connector(CN34) ..................... 62
B.23 SATA Connector (SATA1, 2, 3, 4)................................. 63
Table B.23:SATA Connector (SATA1, 2, 3, 4) ........... 63
B.24 ATX Power Connector (ATX2)...................................... 63
Table B.24:ATX Power Connector (ATX2)................. 63
B.25 LVDS Connector (CN23)................................................ 65
Table B.25:LVDS Connector (CN23) .......................... 65
B.26 CPU/SYSTEM FAN Connector (FAN1/FAN2)............. 66
Table B.26:CPU/SYSTEM FAN Control Connector
(FAN1/FAN2)66
B.27 PCI Slot Connectors (PCI1 and PCI2) ............................ 67
Table B.27:PCI Slot Connectors (PCI1 and PCI2)....... 67
B.28 PCI-E X1 SLOT Connector (PCIE1X1) ........................ 69
Table B.28:PCI-E X1 SLOT Connector (PCIE1X1).... 69
Appendix C System Assignments ......................................72
C.1 System I/O Ports.............................................................. 72
Table C.1:System I/O ports .......................................... 72
C.2 1st MB memory map....................................................... 73
Table C.2:1st MB memory map ................................... 73
C.3 DMA channel assignments.............................................. 73
Table C.3:DMA channel assignments .......................... 73
C.4 Interrupt assignments ...................................................... 74
Table C.4:Interrupt assignments ................................... 74
Table des matières
Autres manuels Advantech Carte mère
Advantech
Advantech PCM-7130 Manuel utilisateur
Advantech
Advantech AIMB-287 Manuel utilisateur
Advantech
Advantech AIMB-231 Manuel utilisateur
Advantech
Advantech GMB-945GC Manuel utilisateur
Advantech
Advantech MIO-2262 Manuel utilisateur
Advantech
Advantech i915GV-INA Series Manuel utilisateur
Advantech
Advantech PCE-5125 Manuel d'installation et d'exploitation
Advantech
Advantech AIMB-203 Manuel utilisateur
Advantech
Advantech AIMB-763 Manuel utilisateur
Advantech
Advantech AIMB-785 Manuel d'installation et d'exploitation
Advantech
Advantech ASMB-925 Series Manuel utilisateur
Advantech
Advantech PCM-4153-A2 Manuel d'installation et d'exploitation
Advantech
Advantech AIMB-205 Manuel utilisateur
Advantech
Advantech MIO-5270 Manuel d'installation et d'exploitation
Advantech
Advantech B+B SmartWorx Airborne WLNN-EK-DP551 Manuel utilisateur
Advantech
Advantech PCM-9576F Manuel utilisateur
Advantech
Advantech PPC-MB-610 Manuel d'installation et d'exploitation
Advantech
Advantech PPC-MB-620 Manuel d'installation et d'exploitation
Advantech
Advantech AIMB-567 Manuel utilisateur
Advantech
Advantech SMB-2501 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
