Advantech UNO-2050 Manuel utilisateur

UNO-2050

GX1-300UniversalNetworkController

with 2 x LAN, 2 x RS-232, 2 x isolated

RS-232/422/485,16 xisolated DI/O

User’s Manual

This document is copyrighted, 2002, by Advantech Co., Ltd. All rights

are reserved. The original manufacturer reserves the right to make

improvements to the products described in this manual at any time

without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

such use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel®and Pentium®are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

C&T is a trademark of Chips and Technologies, Inc.

All other product names or trademarks are properties of their respec-

tive owners.

PartNo.2003205000

1st Edition Printed in Taiwan Sep. 2002

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for

one year from the date of purchase.

This warranty does not apply to any products that have been repaired

or altered by persons other than repair personnel authorized by

Advantech, or which have been subject to misuse, abuse, accident or

improper installation. Advantech assumes no liability under the terms

of this warranty as a consequence of such events.

Because of Advantech high quality-control standards and rigorous

testing, most of our customers never need to use our repair service. If

an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details. If you

think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware and

software used, etc.) Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual,

product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows us

to process your return more quickly.

4. Carefully pack the defective product, a fully completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Technical support and sales assistance

If you have any technical questions about the UNO-2050 or any other

Advantech products, please visit our support website at:

http://www.advantech.com/support

For more information about Advantech’s products and sales informa-

tion, please visit:

http://www.advantech.com

Contents

Chaper 1 Overview ..................................................... 1

1.1 Introduction....................................................................... 2

1.2 Hardware Specifications.................................................. 3

1.3 Safety Precautions ............................................................ 6

1.4 UNO-2050 Series............................................................. 7

1.5 Chassis Dimensions......................................................... 8

Chaper 2 Hardware Functionality ............................. 9

2.1 UNO-2050 Peripherals.................................................. 10

2.2 COM1 ~ COM2: RS-232 Interfaces........................... 10

2.3 COM3 ~ COM4:

Isolated 5-wire RS-232/422/485 Interfaces ............... 11

2.4 On-board Isolated Digital Input................................... 12

2.5 On-board Isolated Digital Output................................ 16

2.6 On-board Isolated Counter/Timer .............................. 18

2.7 LAN: Ethernet Connector............................................ 24

2.8 Power Connector............................................................ 24

2.9 LED Indicators ............................................................... 24

2.10 PS/2 Keyboard and Mouse Connector ....................... 24

2.11 VGA: VGA Display Connector..................................... 25

2.12 Programmable LED and Buzzer for

System Diagnosis ........................................................... 25

2.13 RESET: Reset Button ................................................... 26

Chaper 3 Initial Setup ............................................... 27

3.1 Insert CompactFlash Card ........................................... 28

3.2 Chassis Grounding......................................................... 28

3.3 Connect the Power......................................................... 29

3.4 Plug-in Screw Terminal Block Field

Wiring Considerations................................................... 29

3.5 BIOS Setup and System Assignments........................ 30

3.6 HDD Extension Flexibility .......................................... 30

Appendix A Pin Assignments ................................... 31

A.1 Board Connector and Jumpers.................................... 32

A.2 Standard RS-232 Serial Port (COM1 ~ C0M2)......... 34

A.3 Isolated 5-wire RS-232/422/485 Serial Port

(COM3 ~ COM4) .......................................................... 35

A.4 Ethernet RJ-45 Connector (LAN1~LAN2) ............... 38

A.5 Phoenix Power Connector (CN3) ................................ 39

A.6 PS/2 Keyboard and Mouse Connector (KM1).......... 39

A.7 VGA Display Connector (VGA1) ................................. 40

A.8 CompactFlashTM Master/Slave Jumper Setting

(JP2) ................................................................................. 41

A.9 Enhanced IDE connctor (CN2) .................................... 42

A.10 LCD connector (CN7, Reserved) ............................... 43

A.11 UNO-2050 Control Register........................................ 45

Figures

Figure 1-1: Chassis dimensions................................................................8

Figure 2-1: UNO-2050 front panel ............................................................10

Figure 2-2: UNO-2050 rear panel .............................................................10

Figure 2-3: Digital input connector pin assignments ...............................12

Figure 2-4: Isolated digital input connection.............................................13

Figure 2-5: Digital output connector pin assignments .............................16

Figure 2-6: Isolated digital output connection ..........................................17

Figure 2-7: Counter 0 function block.........................................................19

Figure 2-8: Counter 1 function block.........................................................20

Figure 2-9: 32-bit Counter function block..................................................20

Figure 3-1: Chassis Grounding connection .............................................28

Figure A-1: UNO-2050 connector and jumper locations (Top View) ........32

Figure A-2: UNO-2050 connector and jumper locations (Bottom View) ..32

Figure A-3: RS-485 Wiring topology..........................................................38

Tables

Table 2-1: Serial ports default setting...................................................... 11

Table 2-2: Digital input connector signal description..............................12

Table 2-3: Interrupt control register bit map ............................................14

Table 2-4: Interrupt disable/enable control bit values .............................15

Table 2-5: Interrupt triggering edge control bit values.............................15

Table 2-6: Interrupt flag bit values............................................................15

Table 2-7: Digital output connector signal description ...........................16

Table 2-8: JP12 Digital output power on configuration ...........................17

Table 2-9: Counter/Timer control register bit map ..................................18

Table 2-10 Counter clock source control bit.............................................21

Table 2-11 Counter internal clock control bit ............................................21

Table 2-12 Counter gate source control bit ..............................................22

Table 2-13 Counter output destination .....................................................22

Table 2-14: Counter interrupt flag control bit .............................................23

Table 2-15: 32-bit counter control bit .........................................................23

Table 2-16: LED and Buzzer control register bit map................................25

Table 2-17: Programmable LED control bit...............................................26

Table 2-18: Programmable Buzzer control bit ...........................................26

Table A-1: UNO-2050 connectors and jumpers......................................33

Table A-2: RS-232 serial port pin assignments......................................34

Table A-3 Isolated 5-wire RS-232/422/485 serial port

pin assignments.....................................................................35

Table A-4: Jumpers to select 5-wire RS-232/422/485 ............................35

Table A-5: RS-485 auto flow control mode and RS-422 master/slave

mode selection .......................................................................36

Table A-6: JP7 RS-422/485 terminal resistor setting..............................37

Table A-7: Ethernet RJ-45 connector pin assignments ..........................38

Table A-8: Phoenix power connector pin assignments ..........................39

Table A-9: Keyboard and Mouse connector pin assignments................39

Table A-10: VGA adaptor cable pin assignments .....................................40

Table A-11: IDE hard drive connector ........................................................42

Table A-12: LCD connector ........................................................................43

Table A-13: UNO-2050 control register .....................................................45

UNO-2050

Overview

This chapter gives background informa-

tion on the UNO-2050. It shows you the

UNO-2050overview and specifications.

Sections include:

•Introduction

•Hardware Specifications

•Safety Precautions

•UNO-2050Series

•Chassis Dimension

CHAPTER

2UNO-2050 User's Manual

1.1 Introduction

Are you looking forward to a suitable embedded Application Ready

Platform (ARP) that could shorten your development time and offer

rich networking interfaces to fulfill your extensive needs in different

kind of projects? Advantech Universal Network Controller (UNO-2000

series) is your ANSWER concentrating the services on Network-

enabled Application Ready Platform total solution.

Leveraging field-approved and worldwide-awareness real-time OS

technology, Advantech UNO-2000 series provides Windows CE .NET

ready solution and support several standard networking interfaces,

such as Ethernet, Wireless LAN, RS-232/422/485 and so on. Because

of its openness, great expansion capability and reliable design –

fanless and diskless, Advantech UNO-2000 series becomes an ideal

embedded platform to implement custom applications in diversified

applications.

Table des matières

Autres manuels Advantech Contrôleurs

Advantech

Advantech UNO-2182-D13BE Manuel utilisateur

Advantech

Advantech LNC-5800D Manuel du propriétaire

Advantech

Advantech ADAM-4500 Manuel utilisateur

Advantech

Advantech UNO-2050E Manuel utilisateur

Advantech

Advantech AIIS-1882 Manuel utilisateur

Advantech

Advantech Celeron M Universal Network Controller with PC/104 Extension... Manuel utilisateur

Advantech

Advantech WISE-5580 Manuel utilisateur

Advantech

Advantech UNO-2053E Manuel utilisateur

Advantech

Advantech SKY-4120B Manuel utilisateur

Advantech

Advantech PCI-1760U Manuel d'installation et d'exploitation

Advantech

Advantech INTRAC 204 Manuel utilisateur

Advantech

Advantech UNO-2182 Manuel utilisateur

Advantech

Advantech PCM-26D2CA Manuel d'installation et d'exploitation

Advantech

Advantech UNO-2160 Manuel utilisateur

Advantech

Advantech PCI-1241 Manuel utilisateur

Advantech

Advantech MIC-1816R Manuel d'installation et d'exploitation

Advantech

Advantech ADAM 5510EKW/TP Manuel d'installation et d'exploitation

Advantech

Advantech AMAX-1220 Series Manuel utilisateur

Advantech

Advantech WISE-2210 Manuel d'installation et d'exploitation

Advantech

Advantech ADAM-5511 Manuel utilisateur

Advantech

Advantech GX2-400 Manuel utilisateur

Advantech

Advantech PCL-839+ Manuel utilisateur

Advantech

Advantech APAX-5580 Manuel utilisateur

Advantech

Advantech ADAM-5630 Series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur