Advantech INTRAC 204 Manuel utilisateur
www.advantechwireless.com
INTRAC 204 Antenna Control Unit
For Antennas up to: 9.6 meters in C-Band or 4.5 meters in Ku-Band
Features
Low cost, high performance and high reliability
for antennas up to 9.6 metres in diameter C-
Band and 4.5 metres in diameter Ku-Band
INTRAC™ orbit modelling algorithm offers the
highest tracking Integrity
Accurately tracks satellites with orbital
inclinations up to and beyond 10°
Built in 36VDC, 8A drive unit to directly drive
DC actuators with sequential Dual Axis drive
Average tracking signal degradation less than
0.1dB
Accepts high resolution resolver transducers
down to 20 arc seconds (16 bits)
Compatible with INTELSAT and EUTELSAT
SCPC tracking specifications
Tolerates signal fluctuations that defeat step
track and memory track controllers
Resilient to tracking signal loss, maintaining
integrity for up to 72 hours
Non-volatile memory ensures tracking is
resumed after power failure
Full M&C control via RS232 / RS422 interface
Can Incorporate IBRL-7 integral L-band
beacon receiver
Option to drive a third polarization axis
Overview
The INTRAC™ 204 Antenna Control Unit
enables satellite earth station antennas to
accurately track geosynchronous satellites with
orbital inclinations up to and beyond 10°. The
unit offers superior tracking integrity with any C-
Band antenna up to 9.6 meters and any Ku-
Band antenna up to 4.5 meters. The control unit
uses the INTRAC (INtelligent TRacking Antenna
Control) algorithm which has been developed
and refined over a 20 year period. It offers
exceptional immunity to propagation
disturbances and fades, maintaining reliable
pointing accuracy even at low angles of
elevation in regions of high scintillation.
The INTRAC 205 is compatible with INTELSAT
and EUTELSAT SCPC tracking specifications.
It is able to tolerate signal fluctuations that
defeat step track and memory track controllers
and is resilient to loss of tracking signal, the unit
will maintain tracking integrity for blackout
periods up to 72 hours. The non-volatile
memory ensures that accurate tracking is
resumed after power failure.
The unit incorporates 36VDC motor drive
circuits providing a single box solution that is
simple to install, reducing set up costs. It
features full remote monitoring and control via
an RS232 / RS423 serial interface. Average
tracking signal degradation is less than 0.2dB.
The INTRAC 204 features a two-line LCD
display and can be supplied with an integral L-
Band beacon receiver.
INTRAC 204 Antenna Control Unit
SOUTH AMERICA
BRAZIL
Tel: +55 11 3054 5701
Fax: +55 11 5041 4026
info.brazil@advantechwireless.com
EUROPE
UNITED KINGDOM
Tel: +44 1480 357 600
Fax: +44 1480 357 601
info.uk@advantechwireless.com
RUSSIA & CIS
Tel: +7 495 967 1859
Fax: +7 495 967 30 24
info.russia@advantechwireless.com
NORTH AMERICA
USA
Tel: + 1 703 788-6882
Fax: +1 703 788-6511
info.usa@advantechwireless.com
CANADA
Tel: +1 514 420-0045
Fax: +1 514 420-0073
info.canada@advantechwireless.com
An ISO 9001 : 2008 Company
Ref.: PB-INTRAC204-004-11036
Specifications are subject to change without notice
www.advantechwireless.com
SPECIFICATIONS
SPECIFICATIONS
Operational modes
Standby Manual (Jog) Search Remote Control
Auto (INTRAC) Go To (Position Designate)
Tracking Accuracy
Typically better than 0.1dB RMS signal degradation after tracking for 24 hours (with tracking signal), for orbit
inclinations up to 10°
Prediction Accuracy
Typically better than 0.1dB RMS signal degradation over 72 hours (after loss of tracking signal), for orbit
inclinations up to 10°
Backup
Model data is stored in EEPROM and the real time clock supported by battery backup against power failure
Configuration Memory
Configuration data is stored in EEPROM
Tracking Signal
May be derived from an external tracking receiver or optionally from the integral IBR-L beacon receiver
External Tracking Signal
Voltage varying directly with received signal strength (in dB).
Sensitivity 0.1V / dB to 1.0V / dB
Offset + / - 10 volts max
Lost Lock input, contact closure when tracking signal is lost.
Display
2 line LCD display giving the areas of information:
Azimuth angle Signal strength Elevation angle
Diagnostics Polarization angle
Mode of operation Operational menus
Drive Outputs
36VDC, up to 8A for direct drive of DC actuator motors
Limit Switches
Limit switch inputs for elevation, azimuth and polarization. Contacts normally closed
Position Transducers
Inputs for standard resolver position transducers
OPTIONS
Internal IBR-L Beacon Receiver
This option accepts an L-Band signal, with an input level of -80 to -45dBm.
The signal voltage and lock lost indicators are generated internally. The need for an external beacon
receiver is eliminated.
Remote Control Terminal
IBM PC compatible software is available to provide a remote control terminal function. The terminal
monitors and controls the INTRAC via the standard serial remote control port and provides facilities for
managing and storing multiple orbit models. Alarm information is still available at the front panel.
Polarisation Option
Option to accept a polarization position transducer and to drive a 36VDC polarization motor.
PHYSICAL
Temperature
Range
0 to 50oC - Operating
-25oC to 85oC - Non Operating (storage)
Humidity
5% to 95% RH non condensing - Operating
0% to 99% RH non condensing - Non Operating (storage)
Altitude
10,000 feet max
Input Power
110 or 230V, single phase, 50/60Hz, 50W
Dimensions
483mm (W) x 133mm (H) x 443mm (D).
Mounting
19" rack mounting unit, 2U high.
Weight
8 kg
EN55022 and EN50082-1
USA
FCC Part 15, Subpart B Class A
Autres manuels Advantech Contrôleurs
Advantech
Advantech Celeron M Universal Network Controller with PC/104 Extension... Manuel utilisateur
Advantech
Advantech PCI-1241 Manuel utilisateur
Advantech
Advantech ADAM-5510 Series Manuel d'installation et d'exploitation
Advantech
Advantech ADAMView Manuel utilisateur
Advantech
Advantech LNC-5800D Manuel du propriétaire
Advantech
Advantech Celeron M Universal Network Controller with PC/104 Extension... Manuel utilisateur
Advantech
Advantech GX2-400 Manuel utilisateur
Advantech
Advantech UNO-2182 Manuel utilisateur
Advantech
Advantech UNO-2160 Manuel utilisateur
Advantech
Advantech UNO-2050E Manuel utilisateur
Advantech
Advantech ADAM-5630 Series Manuel utilisateur
Advantech
Advantech MIC-1816R Manuel d'installation et d'exploitation
Advantech
Advantech AMAX-5580 Manuel utilisateur
Advantech
Advantech ADAM-5511 Manuel utilisateur
Advantech
Advantech UNO-2053E Manuel utilisateur
Advantech
Advantech MIC-3321 Manuel d'installation et d'exploitation
Advantech
Advantech UNO-348 Manuel utilisateur
Advantech
Advantech ADAM-4500 Manuel utilisateur
Advantech
Advantech UNO-2050 Manuel utilisateur
Advantech
Advantech WISE-2210 Manuel d'installation et d'exploitation
