Advantech WISE-1510 Manuel utilisateur

User Manual

WISE-1510

M2.COM LoRa IoT Node

WISE-1510 User Manual 1

The documentation and the software included with this product are copyrighted 2016

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties, which may result from its use.

Acknowledgements

ARM is trademarks of ARM Corporation.

Freescale is trademarks of Freescale Corporation.

Microsoft Windows are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced at no charge during the warranty period. For out-of-

warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU speed,

Advantech products used, other hardware and software used, etc.) Note anything

abnormal and list any onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any

helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return more

quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement Order

Card and a photocopy proof of purchase date (such as your sales receipt) in a

WISE-1510 User Manual 2

shippable container. A product returned without proof of the purchase date is not

eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

Declaration of Conformity

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipmt.t.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

This module is intended for OEM integrator. The OEM integrator is responsible for the compliance

to all the rules that apply to the product into which this certified RF module is integrated.

Additional testing and certification may be necessary when multiple modules are used.

WISE-1510 User Manual 3

USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at least 20cm

separation with the antenna while this end product is installed and operated. The end user has to be

informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be

satisfied.

The end user has to also be informed that any changes or modifications not expressly approved by

the manufacturer could void the user's authority to operate this equipment.

If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is

required to be available in the users manual: This device complies with Part 15 of FCC rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful

interference and (2) this device must accept any interference received, including interference that

may cause undesired operation.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains TX FCC ID:

M82-WISE1510 ".

If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement

has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference and (2)

this device must accept any interference received, including interference that may cause undesired

operation.

This radio transmitter has been approved by Industry Canada to operate with the antenna types

listed below with the maximum permissible gain indicated. Antenna types not included in this list,

having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use

with this device.

Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne

énumérés ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antenne non inclus dans

cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour

l'exploitation de l'émetteur.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to

the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de

WISE-1510 User Manual 4

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

This radio transmitter (9404A-WISE1510) has been approved by Industry Canada to operate with

the antenna types listed below with the maximum permissible gain indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that type, are strictly

prohibited for use with this device.

Le présent émetteur radio (9404A-WISE1510) a été approuvé par Industrie Canada pour fonctionner avec

les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal d'antenne. Les types

d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont

strictement interdits pour l'exploitation de l'émetteur.

Antenna list:

Part No.

MPN

Description

1750008625-01

TH-915i

Dipole Ant. SUB-1G 1.8dBi SMA/M BLK 902-928 IPX6

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement

non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la

source de rayonnement et votre corps.

This module is intended for OEM integrator. The OEM integrator is responsible for the compliance

to all the rules that apply to the product into which this certified RF module is integrated.

Additional testing and certification may be necessary when multiple modules are used.

Any changes or modifications not expressly approved by the manufacturer could void the user's

authority to operate this equipment.

USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at least 20cm

separation with the antenna while this end product is installed and operated. The end user has to be

informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be

satisfied.

The end user has to also be informed that any changes or modifications not expressly approved by

WISE-1510 User Manual 5

the manufacturer could void the user's authority to operate this equipment. Operation is subject to

the following two conditions: (1) this device may not cause harmful interference and (2) this device

must accept any interference received, including interference that may cause undesired operation.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains IC:

9404A-WISE1510 ".

The Host Model Number (HMN) must be indicated at any location on the exterior of the end product

or product packaging or product literature which shall be available with the end product or online.

低功率電波輻射性電機管理辦法

茲「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變

更頻率、加大功率或變更原設計之特性及功能」。

(1) 「低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無

線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備

之干擾」。

(2) 「本模組於取得認證後將依規定於模組本體標示審驗合格標籤, 並要求平台廠商於平

台上標示「本產品內含射頻模組 CC XX xx LP yyy Z z」。

WISE-1510 User Manual 6

Packing List

Before setting up the system, check that the items listed below are included and in good condition. If

any item does not accord with the table, please contact your dealer immediately.

1 WISE-1510

1 Screw for WISE-1510

1 China RoHs Notice

Optional Accessories

Part No.

Description

1750008598-01

Sub G antenna Dipole L=195mm, 1dBi 902~928 MHz

1750008599-01

Sub G antenna Dipole L=195mm, 1dBi 863~870 MHz

1750008569-01

Antenna Cable SMA to MHF4 L=300mm

1700015038

FPC Cable 10P-0.5mm 7.9cm for DCU2.0

9696WED200E

ASS'Y WISE-ED20 A101-1 M2.COM Daughter

1931000590

Screw M2.5x5L F/S D=5.3 H=0.8 (1+) ST Ni

1700023619-01

A cable USB-A 4P(M)/micro USB 5P(M) 1m ADAM-T212

1700025876-01

M cable USB-A 4P(M)/Plug-in 2P-5.0 90CM

XRISC-ADP-10HW-AG

ADPA/D 100-240V 10W 5V WM

193A231540

POST F=M3*6L M=M3*6L D=5 d=2.88 B=5 H=15 Cu

Development Board

Part No.

Description

9696150000E

ASS'Y WISE-DB1500 A101-1 M2.COM CARRIER

Ordering Information

Part No.

WISE-1510WMB-SDA1N

Frequency Band

902-928MHz for North America (LoRaWAN)

Part No.

WISE-1510WMB-SDA1E

Frequency Band

863-870MHz for Europe (LoRaWAN)

WISE-1510 User Manual 7

WISE-1510 User Manual 8

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do

not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equipment

and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall

may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment

to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be opened only

by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the

user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

WISE-1510 User Manual 9

Change Log:

Date

Version

Description / Major change

2017/01/05

V0.1

Draft version

2017/02/03

V0.2

Modify chapter 3.2 & 3.3 and add Figure. 10

2017/02/13

V0.3

Update optional accessory with Sub G antenna

Chapter 5 is added for the instruction to enable LoRaWAN

2017/03/14

V0.4

Modify chapter 3.5~3.7 and 4.

2017/04/10

V0.5

Add chapter 3.5 Memory Layout and update 3.6~3.7

2017/04/12

V0.6

Remove Chapter 1.3, update page 2~3 Declaration of

Conformity, Chapter 3.6 and add appendix I and II

2017/04/19

V0.7

Update page 2~5 Declaration of Conformity

2017/04/20

V0.8

Update line numbers in appendix I

2017/10/26

V0.8

Update NCC statement in page 5

2018/02/23

V0.9

Update 1.2 Spec., 3.2 Installation and Appendix I

Autres manuels pour WISE-1510

Table des matières

Autres manuels Advantech Unité de contrôle

Advantech

Advantech AMAX-3285IO Manuel d'installation et d'exploitation

Advantech

Advantech WISE-4671 Manuel d'installation et d'exploitation

Advantech

Advantech ADAM-5000 Series Manuel utilisateur

Advantech

Advantech B+B SmartWorx iMcV-LIM Manuel utilisateur

Advantech

Advantech AIW-357 DK-G2U Manuel utilisateur

Advantech

Advantech MIC-75M11 Manuel utilisateur

Advantech

Advantech Network Device USB-4761 Manuel d'installation et d'exploitation

Advantech

Advantech MIC-75G30 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3347 Series Manuel utilisateur

Advantech

Advantech AMAX-175 Series Manuel utilisateur

Advantech

Advantech iDAQ-817 Manuel utilisateur

Advantech

Advantech PCM-3345 Manuel utilisateur

Advantech

Advantech PCM-233A Manuel d'installation et d'exploitation

Advantech

Advantech SOM-4466 Manuel utilisateur

Advantech

Advantech PCL-812PG Manuel utilisateur

Advantech

Advantech SOM-5892 Manuel utilisateur

Advantech

Advantech MIO-6255 Manuel d'installation et d'exploitation

Advantech

Advantech WISE-1510 Manuel utilisateur

Advantech

Advantech MIC-3376 Manuel utilisateur

Advantech

Advantech PCM-24BXWF Manuel d'installation et d'exploitation

Advantech

Advantech iDAQ-815 Manuel utilisateur

Advantech

Advantech B+B SmartWorx 232PTC9 Manuel utilisateur

Advantech

Advantech ADAM-6051 Manuel utilisateur

Advantech

Advantech PCM-23C1CF Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur