Advantech PCE-5124 Manuel utilisateur

PCE-5124

LGA775 Intel® Core™ 2 Quad / Core™ 2

Duo Processor-based 800/1066/1333

MHz FSB PICMG 1.3 Single Host Board

with PCIe / DDR2 / Dual GbE LAN

User Manual

PCE-5124 User Manual ii

This document is copyrighted, 2008, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to make improve-

ments to the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit-

ted in any form or by any means without the prior written permission of

Advantech Co., Ltd. Information provided in this manual is intended to

be accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, nor for any infringements upon the rights of

third parties which may result from its use.

Acknowledgements

• AMIBIOS is a trademark of American Megatrends Inc.

• IBM and PC are trademarks of International Business Machines Cor-

poration.

•Intel,Core

TM 2 Quad, CoreTM 2 Duo are trademarks of Intel Corpora-

tion.

• WinBond is a trademark of Winbond Corporation.

• All other product names or trademarks are the properties of their

respective owners.

Part No. 2002512400 1st Edition

April 2008

iii

A Message to the Customer

Advantech Customer Services

Each and every Advantech product is built to the most exacting specifica-

tions to ensure reliable performance in the harsh and demanding condi-

tions typical of industrial environments. Whether your new Advantech

equipment is destined for the laboratory or the factory floor, you can be

assured that your product will provide the reliability and ease of operation

for which the name Advantech has come to be known.

Your satisfaction is our primary concern. Here is a guide to Advantech’s

customer services. To ensure you get the full benefit of our services,

please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if

you run into technical difficulties, we are here to help. For the most fre-

quently asked questions, you can easily find answers in your product doc-

umentation. These answers are normally a lot more detailed than the ones

we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most from

your Advantech products. In fact, most problems reported are minor and

are able to be easily solved over the phone.

In addition, free technical support is available from Advantech engineers

every business day. We are always ready to give advice on application

requirements or specific information on the installation and operation of

any of our products.

PCE-5124 User Manual iv

Certifications

This device complies with the requirements in part 15 of the FCC rules:

Operation is subject to the following two conditions:

• This device may not cause harmful interference

• This device must accept any interference received, including interfer-

ence that may cause undesired operation

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

device in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his/her

own expense. The user is advised that any equipment changes or modifi-

cations not expressly approved by the party responsible for compliance

would void the compliance to FCC regulations and therefore, the user's

authority to operate the equipment.

Caution! There is a danger of a new battery exploding if

it is incorrectly installed. Do not attempt to

recharge, force open, or heat the battery.

Replace the battery only with the same or

equivalent type recommended by the manufac-

turer. Discard used batteries according to the

manufacturer’s instructions.

Memory Compatibility

Network Feature Comparison

Table 1.1: PCE-5124 Memory Tested for Compatibility

Brand Size Speed Type ECC Vendor

PN Advantech

PN Memory

Transcend

512

MB DDR

2 667 DDR2 N 78.91G

92.420 N/A ELPIDA E5108AG-6E-E

(64x8)

GB DDR

2 667 DDR2 N 78.01G

92.420 N/A ELPIDA E5108AGBG-

6E-E (64x8)

512

MB DDR

2 667 DDR2 N TS64M

LQ64V

96D2-

512M667N

N-TR

SEC K4T51083QC

ZCE6 (64x8)

512

MB DDR

2 667 DDR2 N TS64M

LQ64V

96D2-

512M667N

N-TR

Micron 5XB32D9DCL

(64x8)

GB DDR

2 667 DDR2 N TS2QN

J23450

-6S

96D2-

1G667NN-

SEC K4T51083QE

ZCE6 (64x8)

GB DDR

2 667 DDR2 N TS256

MLQ64

V6U N/A Micron 7HE12 D9HNL

(128x8)

GB DDR

2 800 DDR2 N TS128

MLQ64

V8J N/A ProMOS

V59C1512804QBF25

(64x8)

GB DDR

2 667 DDR2 N TS256

MLQ64

V6U N/A SAMSUNG

K4T1G084QA-ZCE6

(128x8)

DSL

GB DDR

2 667 DDR2 N N/A N/A ELPIDA E5108AGBG-

6E-E (64x8)

GB DDR

2 800 DDR2 N N/A N/A ELPIDA E5108AHSE-

8E-E (64x8)

Kingston

GB DDR

2 667 DDR2 N KVR66

7D2N5/

2G N/A Micron 7KE12 D9HNL

(128x8)

GB DDR

2 800 DDR2 N KVR80

0D2N5/

1G N/A ELPIDA E5108AHSE-

8E-E (64x8)

Table 1.2: PCE-5124 comparison table

LAN/Model PCE-5124G2 PCE-5124VG

LAN1: Intel 82566DM Yes Yes

LAN2: Intel 82573V Yes No

PCE-5124 User Manual vi

Product Warranty

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

vii

Initial Inspection

Before you begin installing your motherboard, please make sure that the

following materials have been shipped:

If any of these items are missing or damaged, contact your distributor or

sales representative immediately. We have carefully inspected the PCE-

5124 mechanically and electrically before shipment. It should be free of

marks and scratches and in perfect working order upon receipt. As you

unpack the PCE-5124, check it for signs of shipping damage. (For exam-

ple, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet

the specifications, notify our service department or your local sales repre-

sentative immediately. Also notify the carrier. Retain the shipping carton

and packing material for inspection by the carrier. After inspection, we

will make arrangements to repair or replace the unit.

• 1 PCE-5124 PICMG 1.3 Single Host Board

• 1 PCE-5124 startup manual P/N: 2002512410

• 1 CD with utility P/N: 2062512400

• 1 FDD cable P/N: 1700340640

• 1 User note for full-sized CPU card P/N: 2002721020

• 2 Serial ATA HDD data cable P/N: 1700003194

• 2 Serial ATA HDD power cable P/N: 1703150102

• 1 COM + printer ports cable kit P/N: 1701260305

• 1 4-port USB cable kit P/N: 1700008461

• Keyboard and mouse Y cable P/N: 1700060202

• 1 jumper package P/N: 9689000068

• 1 warranty card P/N: 2190000902

PCE-5124 User Manual viii

ix Table of Contents

Contents

Chapter 1 Hardware Configuration.................................2

1.1 Introduction....................................................................... 2

1.2 Features & Benifits ........................................................... 3

1.3 Specifications.................................................................... 4

1.3.1 System.............................................................................4

1.3.2 Memory........................................................................... 4

1.3.3 Input/Output.................................................................... 5

1.3.4 Graphics..........................................................................5

1.3.5 Ethernet LAN.................................................................. 5

1.3.6 Industrial features ...........................................................5

1.3.7 Mechanical and environmental specifications................ 6

1.4 Jumpers and Connectors.................................................... 6

Table 1.1:Jumper list....................................................... 6

Table 1.2:Connector list.................................................. 7

1.5 Board Layout: Jumper and Connector Locations.............. 9

Figure 1.1:Jumper and connector locations....................9

1.6 PCE-5124 Block Diagram............................................... 10

Figure 1.2:PCE-5124 block diagram............................10

1.7 Safety Precautions.......................................................... 11

1.8 Jumper Settings............................................................... 12

1.8.1 How to set jumpers ....................................................... 12

1.8.2 CMOS clear (CMOS1) ................................................. 12

Table 1.3:CMOS (CMOS1).......................................... 12

1.8.3 Watchdog timer output (JWDT1)................................. 14

Table 1.4:Watchdog timer output (JWDT1)................. 14

1.8.4 COM2 RS-232/422/485 mode selector (JESTCOM2). 16

Figure 1.3: COM2 RS-232/422/485 jumper setting..... 16

Table 1.6:COM2 RS-232/422/485 mode selector ........16

Table 1.5: H/W monitor alarm (JOBS1)....................... 16

1.9 System Memory .............................................................. 18

1.10 Memory Installation Procedures ..................................... 19

1.11 Cache Memory................................................................ 19

1.12 Processor Installation .......................... 19

Chapter 2 Connecting Peripherals .................................22

2.1 Introduction..................................................................... 22

2.2 Floppy Drive Connector (FDD1).................................... 23

2.3 Parallel Port (LPT1)........................................................ 24

2.4 USB Ports (USB12, USB34, USB56, USB78)............... 25

2.5 VGA Connector (VGA1) ................................................ 26

2.6 Serial Ports (COM1, COM2, COM3-4 & COM5-6) ...... 27

PCE-5124 User Manual x

2.7 PS/2 Keyboard and Mouse Connector (KBMS1)........... 29

2.8 CPU Fan Connector (CPUFAN1)................................... 30

2.9 Front Panel Connectors (JFP1, JFP2 & JFP3) ................ 31

2.9.1 Power LED and keyboard lock (JFP3)......................... 31

Table 2.1:PS/2 or ATX power supply LED status........ 32

2.9.2 External speaker (JFP2)................................................ 32

2.9.3 Reset connector (JFP1)................................................. 32

2.9.4 HDD LED connector (JFP2)......................................... 32

2.9.5 ATX soft power switch (JFP1)..................................... 32

2.10 H/W Monitor Alarm (JOBS1)......................................... 33

2.11 LAN Ports (LAN1 & LAN2).......................................... 34

Table 2.2:LAN LED indicator...................................... 34

2.12 High Definition Audio Module Interface........................ 35

2.13 GPIO Header (GPIO1).................................................... 36

2.14 Case Open Connector (JCASE1) .................................... 37

2.15 Front Panel LAN Indicator Connector (LANLED1) ...... 38

Table 2.3:Front Panel LAN Indicator Connector .........38

2.16 Serial ATA Interface (SATA1~SATA6) ........................ 39

Chapter 3 AMI BIOS Setup............................................42

Figure 3.1:Setup program initial screen........................ 42

3.1 Entering Setup................................................................. 43

Figure 3.2:Press Del to run Setup................................. 43

3.2 Main Setup ...................................................................... 44

Figure 3.3:Main setup screen........................................ 44

3.2.1 System time / System date............................................44

3.3 Advanced BIOS Features Setup...................................... 45

Figure 3.4:Advanced BIOS features setup screen ........ 45

3.3.1 CPU configuration........................................................ 46

Figure 3.5:CPU configuration setting........................... 46

3.3.2 IDE configuration......................................................... 48

Figure 3.6:IDE configuration........................................ 48

3.3.3 Super I/O configuration ................................................49

Figure 3.7:Super I/O configuration...............................49

3.3.4 Hardware health function..............................................51

Figure 3.8:Hardware health configuration.................... 51

3.3.5 APM configuration ....................................................... 52

Figure 3.9:APM configuration...................................... 52

Figure 3.10:Configure remote access type and parameters

................................................................... 53

3.4 PCI/PNP Setup................................................................ 54

Figure 3.11:PCI/PNP setup........................................... 54

3.4.1 Clear NVRAM.............................................................. 54

3.4.2 Plug and play O/S.........................................................54

3.4.3 PCI latency timer.......................................................... 55

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech AIMB-707 Manuel d'installation et d'exploitation

Advantech

Advantech UbiQ-SM30 Manuel utilisateur

Advantech

Advantech PCA-6004V-00A1 Manuel utilisateur

Advantech

Advantech PCL-746+ Manuel utilisateur

Advantech

Advantech UNO-3300G Series Manuel utilisateur

Advantech

Advantech PCA-6190 Manuel utilisateur

Advantech

Advantech PCA-6011 Manuel d'installation et d'exploitation

Advantech

Advantech SKY-MXM-A1000 Manuel utilisateur

Advantech

Advantech ECU-P1628D Manuel d'installation et d'exploitation

Advantech

Advantech MIC-715 Manuel utilisateur

Advantech

Advantech PCE-7131 Manuel d'installation et d'exploitation

Advantech

Advantech HPC-7420 Manuel utilisateur

Advantech

Advantech SNMP-1000-E2B1E Guide de sécurité

Advantech

Advantech ASMB-610V3 Manuel d'installation et d'exploitation

Advantech

Advantech SOM-5991 Manuel utilisateur

Advantech

Advantech LGA 1700 Manuel utilisateur

Advantech

Advantech MIO-2263 Manuel d'installation et d'exploitation

Advantech

Advantech MIO-4370 Manuel utilisateur

Advantech

Advantech PCA-6276 Manuel utilisateur

Advantech

Advantech PCE-5B12-07 Manuel d'installation et d'exploitation

Advantech

Advantech UNO-2172 Manuel utilisateur

Advantech

Advantech PPC-615W Manuel utilisateur

Advantech

Advantech PCIE-1816 Manuel utilisateur

Advantech

Advantech MIC-710AIL Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur