Advantech PCA-6176 Series Manuel utilisateur
PCA-6176 Series
Full-size Pentium®II/III
processor-based
PCI/ISA-bus CPU card
Copyright notice
This document is copyrighted, 1999, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties which may result from its
use.
Acknowledgements
• Adaptec and EZ-SCSI are trademarks of Adaptec Inc.
• AMI is a trademark of AMZ Technologies Corp.
• AWARD is a trademark of AWARD Software, Inc.
• AMD is a trademark of Advanced Micro Devices, Inc.
• IBM and PC are trademarks of International Business Machines
Corporation.
• Intel is a trademark of Intel Corporation.
• MS-DOS is a trademark of Microsoft Corporation.
• SMC is a trademark of Standard Microsystems Corporation.
• NCR is a trademark of NCR Corporation.
All other product names or trademarks are the properties of their
respective owners.
Part No. 2006617610
2nd Edition Printed in Taiwan May 1999
A Message to the Customer
Advantech customer services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the
installation and operation of any of our products.
Other PCA-6176 Series features appear elsewhere in this manual
PCA-6176 series comparison table
Model PCA-6176L PCA-6176 PCA-6176F PCA-6176S PCA-6176E
CPU Intel: Pentium®II/III
350 ~ 500 MHz Intel: Pentium®II/III
350 ~ 500 MHz Intel: Pentium®II/III
350 ~ 500 MHz Intel: Pentium®II/III
350 ~ 500 MHz Intel: Pentium®II/III
350 ~ 500 MHz
System
chipset Intel 440 BX Intel 440 BX Intel 440 BX Intel 440 BX Intel 440 BX
BIOS Award, P&P Award, P&P Award, P&P Award, P&P Award, P&P
L2 cache 512 KB 512 KB 512 KB 512 KB 512 KB
Max. system
RAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM 1 GB SDRAM
VGA (AGP) x ATI 3D Rage Pro
Turbo ATI 3D Rage Pro
Turbo ATI 3D Rage Pro
Turbo ATI 3D Rage Pro
Turbo
LAN x x 10/100Base-T,
Intel 82558 x10/100Base-T,
Intel 82558
SCSI x x Adaptec 7890
Ultra2 SCSI
32-bit
Adaptec 7890
Ultra2 SCSI
32-bit x
HISA üüüüü
USB 22222
EIDE 44444
2S/1P üüüüü
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous
testing, most of our customers never need to use our repair service. If
an Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you
will be billed according to the cost of replacement materials, service
time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, type of PC, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and list
any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
material authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Initial Inspection
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCA-6176 Pentium®II/III single board computer
• 1 Pentium II/III CPU, and 1 cooling fan (optional)
• 1 PCA-6176 User's Manual
• Utility disks/CD with VGA BIOS
• 2 Ethernet driver disks/CD (PCA-6176E/F only)
• SCSI driver disks/CD (PCA-6176S/F only)
• 1 bus master driver disk/CD
• 2 disks/CD for OBS Win95 drivers
• 1 FDD cable
• 2 EIDE HDD cables
• 1 printer cable and 1 serial port cable
• 1 temperature sensor cable
• 1 ivory cable for keyboard and mouse
• 1 SCSI cable (Ultra/Ultra Wide) (PCA-6176S/F only)
• 1 USB cable (optional)
• 1 ATX-to-PS/2 power cable
• 1 Pentium®II/III CPU retention module (factory installed)
If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
We have carefully inspected the PCA-6176 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the PCA-6176, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or
your local sales representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for inspection by the
carrier. After inspection, we will make arrangements to repair or
replace the unit.
Contents
Chapter 1 Hardware Configuration.............................. 1
1.1 Introduction........................................................................2
1.2 Features...............................................................................3
1.3 Specifications ......................................................................4
System..................................................................................4
Memory................................................................................4
Input/Output .........................................................................4
VGA interface ......................................................................5
SCSI interface ......................................................................5
LAN .....................................................................................5
Industrial features ................................................................5
Mechanical and environmental specifications.....................6
1.4 Board Layout: Main Features ..........................................7
1.5 Jumpers and Connectors...................................................8
1.6 Board Layout: Jumper and Connector Locations ........10
1.7 Safety Precautions............................................................11
1.8 Jumper Settings................................................................12
1.8.1 How to set jumpers ...................................................12
1.8.2 CPU clock ratio setting (SW1) .................................12
1.8.3 CMOS clear (J1) .......................................................13
1.8.4 Watchdog timer output (J2) ......................................13
1.9 System Memory................................................................14
1.9.1 Sample calculation: DIMM memory capacity..........14
1.9.2 Supplementary information about DIMMs ..............15
1.10 Memory Installation Procedures ....................................16
1.11 Cache Memory .................................................................17
1.12 Mounting the CPU and Cooling Modules......................18
Chapter 2 Connecting Peripherals ............................ 21
2.1 Primary (CN1) and Secondary (CN2) IDE
Connectors ........................................................................22
2.2 Floppy Drive Connector (CN3).......................................23
2.3 Parallel Port Connector (CN4) .......................................23
2.4 SCSI Connector (CN5) ....................................................24
2.5 USB Connector (CN6) .....................................................24
2.6 VGA Connector (CN7) ....................................................25
2.7 Ethernet Connector (CN8) ..............................................25
2.8 Serial Ports (CN9: COM1; CN10: COM2)....................25
2.9 PS/2 Keyboard and Mouse Connector (CN11) .............26
2.10 External Keyboard Connector (CN12) ..........................27
2.11 IR Connector (CN13).......................................................27
2.12 CPU Fan Connector (CN14) ...........................................27
2.13 CPU Temperature Sensor (CN15)..................................28
2.14 Front Panel Connectors
(CN16, CN17, CN18, CN19 and CN21)..........................28
2.14.1 Keyboard lock and power on LED (CN16) ............28
2.14.2 External speaker (CN17).........................................29
2.14.3 Reset (CN18)...........................................................29
2.14.4 IDE LED (CN19) ....................................................29
2.14.5 ATX soft power switch (CN21)..............................29
2.15 ATX Power Control Connectors (CN20 and CN21).....29
2.15.1 ATX feature connector (CN20) and soft power
switch connector (CN21) .......................................29
2.15.2 Controlling the soft power switch...........................30
Chapter 3 Award BIOS Setup ..................................... 31
3.1 Introduction......................................................................32
3.2 Entering Setup..................................................................32
3.3 Standard CMOS Setup....................................................33
3.4 BIOS Features Setup .......................................................34
3.4.1 Virus Warning...........................................................34
3.4.2 Quick Power On Self Test ........................................35
3.4.3 Boot Sequence...........................................................35
3.4.4 Boot Up Floppy Seek ................................................35
3.4.5 Boot Up NumLock Status .........................................36
3.4.6 Gate A20 Option .......................................................36
3.4.7 Typematic Rate Setting.............................................36
3.4.8 Typematic Rate (Chars/Sec) .....................................36
3.4.9 Typematic Delay (msec) ...........................................36
3.4.10 Security Option .......................................................36
3.4.11 PCI/VGA Palette Snoop..........................................37
3.4.12 OS Select for DRAM > 64 MB...............................37
3.4.13 Video BIOS Shadow ...............................................37
3.4.14 C8000-CBFFF Shadow / DC000-DFFFF Shadow .37
3.5 Chipset Features Setup....................................................38
3.6 Power Management Setup ..............................................39
3.6.1 Power Management ..................................................39
3.6.2 HDD Power Management.........................................39
3.6.3 Soft-Off by PWR-BTTN...........................................40
3.7 PCI Configuration Setup.................................................40
3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................41
3.7.2 DMA-x assigned to : PCI/ISA PnP...........................41
3.7.3 Used MEM base addr : N/A......................................41
3.8 Load BIOS Defaults .........................................................42
3.9 Load Setup Defaults.........................................................42
3.10 Integrated Peripherals.....................................................42
3.11 Password Setting ..............................................................43
3.12 IDE HDD Auto Detection ................................................43
3.13 Save & Exit Setup ............................................................44
3.14 Exit Without Saving.........................................................44
Chapter 4 AGP VGA Setup ......................................... 45
4.1 Before you begin...............................................................46
4.2 Features.............................................................................46
4.3 Installation ........................................................................47
4.4 Driver installation ............................................................48
4.5 Windows 95/98 Drivers Setup Procedure ......................49
4.6 Windows NT Drivers Setup Procedure..........................55
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Advantech Matériel informatique
Advantech
Advantech SOM-E780 Manuel utilisateur
Advantech
Advantech PCM-4380 Manuel d'installation et d'exploitation
Advantech
Advantech AMAX-5070 Manuel utilisateur
Advantech
Advantech PCA-6136 Manuel utilisateur
Advantech
Advantech PCIE-1203 Manuel utilisateur
Advantech
Advantech MIO-5375 Manuel utilisateur
Advantech
Advantech ASMB-588 Manuel d'installation et d'exploitation
Advantech
Advantech Watchdog Timer UNO-2171 Manuel utilisateur
Advantech
Advantech HPC-6240 Manuel utilisateur
Advantech
Advantech IDK-2119 Series Manuel utilisateur
Advantech
Advantech PCA-6743 Manuel d'installation et d'exploitation
Advantech
Advantech AiMC-2000 Manuel utilisateur
Advantech
Advantech ASMB-785 Manuel d'installation et d'exploitation
Advantech
Advantech PCIE-1158 Manuel d'installation et d'exploitation
Advantech
Advantech EPC-R6410 Manuel utilisateur
Advantech
Advantech PCA-6179 Manuel utilisateur
Advantech
Advantech HPC-8000 Manuel utilisateur
Advantech
Advantech PCA-6276 Manuel utilisateur
Advantech
Advantech PCE-3029 Manuel d'installation et d'exploitation
Advantech
Advantech MIC-3393 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
