Advantech PCA-6154 Manuel utilisateur

PCA-6154/6154L

Half-size all-in-one Pentium®CPU

card with VGA and fast Ethernet

interface

PCA-6154/6154L User's Manual

This document is copyrighted, 1998. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

AMD is a trademark of Advanced Micro Devices, Inc.

Award is a trademark of Award Software International, Inc.

Cyrix is a trademark of Cyrix Corporation.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

SiS is a trademark of Silicon Integration Systems Corporation.

UMC is a trademark of United Microelectronics Corporation.

ITE is a trademark of Integrated Technology Express, Inc.

All other product names or trademarks are properties of their

respective owners.

For more information on this and other Advantech products please

visitourwebsiteat:http://www.advantech.com

http://www.advantech.com/epc

For technical support and service for please visit our support website

at:http://support.advantech.com

Thismanual isfor thePCA-6154/PCA-6154L Rev.A3

PartNo.2006615404 4thEdition

Printed in Taiwan July 1999

Preface and Table of Contents

Packing List

Before installing your board, ensure that the following materials have

been received:

• 1 PCA-6154/6154L all-in-one single board computer

• 2 utility disks with Ethernet utility programs (PCA-6154 only)

• 1 utility disk with IDE utility programs

• 6 utility disks with SVGA utility programs and drivers for

Windows 3.1/95/NT and OS/2

• 1hard disk drive (IDE) interface cable (40-pin)

• 1 floppy disk drive interface cable (34-pin)

• 1 parallel port adapter (26-pin) and COM2 adapter (9-pin) kit

• 1 USB cable

• 1 CPU fan with heat sink

• 1 CPU cooling fan for PGA socket Pentium®MMX use

• 1 6-pin mini-DIN keyboard & PS/2 mouse adapter

• 1 warranty certificate

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Optional Devices

• IrdAadapter (part#:968900042)

PCA-6154/6154L User's Manual

Contents

Chapter 1 Hardware Configuration.........................1

1.1 Introduction....................................................................2

1.2 Specifications..................................................................3

1.3 Board Layout: Dimensions..........................................5

1.4 Jumpers and Connectors.............................................6

1.6 Board Layout: Connector Locations..........................8

1.5 Board Layout: Jumper Locations...............................9

1.7 Safety Precautions.......................................................10

1.8 Jumper Settings...........................................................10

1.8.1 CPU clock ratio select (JP2)....................................11

1.8.2 CPU core voltage select (JP3).................................12

1.8.3 Watchdog timer configuration (JP4)........................12

1.8.4 COM2 settings for RS-232/422/485 (JP8)..............13

1.8.5 DOC2000 address setting (JP7)..............................14

1.8.6 CMOS backup select (JP5)....................................14

1.8.7 DLL circuit for CPU clock optimization (JP10)......14

1.8.8 Buzzer enable/disable (CN16).................................15

1.9Installing DRAM (SIMMs)...................................15

1.9.1 Installing SIMMs.....................................................15

Chapter 2 Connecting Peripherals........................17

2.1Enhanced IDE Connector (CN1).............................19

2.2VGA Display Connector (CN7)................................20

2.3Floppy Drive Connector (CN2)................................20

2.4Parallel Port Connector (CN3).................................20

2.5Keyboard & PS/2 Mouse Connector (CN15)........21

2.6Front Panel Connector (CN16)................................21

2.7Hard Disk Drive LED (CN17).................................22

Preface and Table of Contents

2.8 Serial Ports (CN11: COM1; CN10: COM2) ......... 22

2.8.1 RS-232 connection (COM1-CN11) ..........................22

2.8.2 RS-232/422/485 connection (COM2-CN10) ............23

2.9 Power Connectors...................................................... 23

2.9.1 Main power connector +5 V, +12 V, -12 V (CN6)...23

2.9.2 CPU fan power supply connector (CN4).................23

2.10 Ethernet Configuration (PCA-6154 Only).............. 24

RJ-45A connector (CN8) ............................................................ 24

Network boot .............................................................................. 24

2.11 USB Connector (CN9)............................................... 24

2.12 IR Connector (CN5) .................................................. 24

Chapter 3 VGA Display & Ethernet Software

Configuration....................................... 25

3.1 Introduction................................................................. 26

3.2 Utility Disk .................................................................. 26

3.3 VGA Display Software Configuration ...................... 27

3.4 Ethernet Software Configuration ............................. 27

Chapter 4 Award BIOS Setup ................................ 29

4.1 AWARD BIOS Setup.................................................. 30

4.1.1 Entering setup ...........................................................30

4.1.2 Standard CMOS setup .............................................31

4.1.3 BIOS features setup.................................................32

4.1.4 CHIPSET features setup .........................................36

4.1.5 Power management setup ........................................37

4.1.6 PCI configuration setup ............................................38

4.1.7 Load BIOS defaults..................................................38

4.1.8 Load setup defaults ..................................................38

4.1.9 Integrated Peripherals ..............................................39

4.1.10 Password setting.....................................................39

4.1.11 IDE HDD auto detection........................................39

4.1.12 Save & exit setup ...................................................40

4.1.13 Exit without saving..................................................40

PCA-6154/6154L User's Manual

Chapter 5 PCI SVGA Setup .................................... 41

5.1 Before You Begin ....................................................... 42

5.2 Installation................................................................... 42

5.3 Driver Installation ...................................................... 43

5.3.1 Windows setup .........................................................43

5.3.2 DOS setup ................................................................44

5.4 Windows 95 Drivers Setup Procedure.................... 46

5.5 Windows NT Drivers Setup Procedure .................. 46

5.6 OS/2 Drivers Setup Procedure ................................ 47

Preliminary steps......................................................................... 47

Installing from diskette ................................................................ 47

Selecting monitor type................................................................. 49

Selecting screen resolution/refresh rate ........................................ 49

Installation notes ......................................................................... 50

Appendix A Programming the Watchdog Timer... 51

A.1 Programming the watchdog timer ........................... 52

Appendix B Installing PC/104 Modules................. 55

B.1 Installing PC/104 modules........................................ 56

Appendix C Pin Assignments................................ 59

C.1 CRT Display Connector (CN7) ................................ 60

C.2 COM1 RS-232 Serial Port (CN11) .......................... 60

C.3 COM2 RS-232/422/485 Serial Port (CN10)........... 61

C.4 Keyboard and Mouse Connnector (CN15) ............ 61

C.5 External Keyboard Connnector (CN14)................. 62

C.6 Main Power Connector (CN6) ................................. 62

C.7 IDE Hard Drive Connector (CN1) .......................... 63

C.8 USB Connector (CN9)............................................... 64

C.9 CPU Fan Power Connector (CN4) .......................... 64

C.10Front Panel Connector (CN16)................................ 65

C.11Ethernet RJ-45 Connector (CN8)........................... 65

C.12Floppy Drive Connector (CN2)................................ 66

Preface and Table of Contents

C.13Parallel Port Connector (CN3)................................. 67

C.14IR Connector (CN5) .................................................. 68

C.15HDD LED Connector (CN17).................................. 68

C.16System I/O Ports ........................................................ 69

C.17DMA Channel Assignments .................................... 70

C.18Interrupt Assignments .............................................. 71

C.191st MB Memory Map ............................................... 71

Appendix D DOC®2000 Installation Guide............ 73

D.1 DiskOnChip®2000 Quick Installation Guide........ 74

DiskOnChip®2000 installation instructions ............................... 74

Additional information and assistance......................................... 75

PCA-6154/6154L User's Manual

Tables

Table 1-1: PCA-6154/6154L jumpers....................................... 6

Table 1-2: PCA-6154/6154L connectors.................................. 7

Table 1-3: CPU clock ratio select (JP2) ................................ 11

Table 1-4: CPU speed reference table....................................11

Table 1-5: System/PCI clock setting (JP9) .............................12

Table 1-6: CPU voltage select (JP3)......................................12

Table 1-7: Watchdog timer system reset select (JP4).............13

Table 1-8: COM2 settings for RS-232/422/485 (JP8) .............13

Table 1-9: DOC2000 address setting (JP7)............................14

Table 1-10: RTC power and CMOS clear (JP5)....................14

Table 1-11: DLL circiut for CPU clock optimization (JP10) ...14

Table 1-12: Buzzer enable/disable (CN16).............................15

Table 2-1: Connectors .............................................................18

Table 2-2: Serial port connections (COM1, COM2) ...............22

Table 2-3: PCA-6154/L serial port default settings.................23

Table C-1: PCA-6154/L CRT display connector ....................60

Table C-2: PCA-6154/L COM1 RS-232 serial port................60

Table C-3: PCA-6154/L COM2 RS-232/422/485 series port .61

Table C-4: PCA-6154/L keyboard and mouse connector .......61

Table C-5: PCA-6154/L external keyboard connector ...........62

Table C-6: PCA-6154/L main power connector .....................62

Table C-7: PCA-6154/L IDE hard drive connector ................63

Table C-8: USB1/USB2 connector .........................................64

Table C-9: PCA-6154/L CPU fan power connector ..............64

Table C-10: PCA-6154/L front panel connector .....................65

Table C-11: PCA-6154/L Ethernet RJ-45 connector ..............65

Table C-12: PCA-6154/L floppy drive connector ...................66

Table C-13: PCA-6154/L parallel port connector ...................67

Table C-14: PCA-6154/L IR connector ..................................68

Table C-15: PCA-6154/L HDD LED connector ....................68

Table C-16: System I/O ports..................................................69

Table C-17: DMA channel assignments..................................70

Table C-18: Interrupt assignments...........................................71

Table C-19: 1st MB memory map...........................................71

Preface and Table of Contents

Figures

Figure 1-1: PCA-6154/6154L board layout: Dimensions.......... 5

Figure 1-2: PCA-6154/6154L board layout: Jumper locations.. 9

Figure 1-3: PCA-6154/6154L board layout: Connector locations8

Figure 4-1: Setup program initial screen ..................................30

Figure 4-2: CMOS setup screen..............................................31

Figure 4-3: BIOS features setup screen..................................32

Figure 4-4: CHIPSET features setup screen ..........................36

Figure 4-5: Power management setup screen.........................37

Figure 4-6: PCI configuration screen ......................................38

Figure 4-7: Integrated peripherals ...........................................39

Figure B-1: PC/104 module mounting diagram .......................57

Figure B-2: PC/104 module dimensions (inches) (±5 %) ........57

PCA-6154/6154L User's Manual

Autres manuels pour PCA-6154

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech FWA-1211 Manuel d'installation et d'exploitation

Advantech

Advantech SOM-6883 Manuel utilisateur

Advantech

Advantech MIC-3820 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6743 Manuel d'installation et d'exploitation

Advantech

Advantech RSB-3720 Manuel utilisateur

Advantech

Advantech SOM-C350 Manuel utilisateur

Advantech

Advantech PCE-5B05V-30B1E Manuel d'installation et d'exploitation

Advantech

Advantech PPC-3151 Manuel utilisateur

Advantech

Advantech SNMP-1000-E2B1E Guide de sécurité

Advantech

Advantech PCE-5124 Manuel utilisateur

Advantech

Advantech MIC-715 Manuel utilisateur

Advantech

Advantech ASMB-831 Series Manuel d'installation et d'exploitation

Advantech

Advantech ECU-479 Series Manuel utilisateur

Advantech

Advantech POC-824 Manuel utilisateur

Advantech

Advantech IPC-619 Manuel utilisateur

Advantech

Advantech PCIE-1730H Manuel d'installation et d'exploitation

Advantech

Advantech PCM-26R1EC Manuel utilisateur

Advantech

Advantech COASTIPC PPC-412 Manuel utilisateur

Advantech

Advantech MIC-7 Series Manuel d'installation et d'exploitation

Advantech

Advantech ECU-P1522LPE Manuel d'installation et d'exploitation

Advantech

Advantech AIMC-3421 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6010 Manuel utilisateur

Advantech

Advantech ROM-5420 Manuel utilisateur

Advantech

Advantech TREK-550-A00E Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur