Advantech PCA-6004V-00A1 Manuel utilisateur

PCA-6004

Full-sized PCI/ISA-bus

CPU card with VIA C3

CPU

This document is copyrighted, 2000, by Advantech Co., Ltd. All rights

are reserved. Advantech Co., Ltd. reserves the right to make improve-

ments to the products described in this manual at any time without

notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of Advantech Co., Ltd. Information provided in this manual

is intended to be accurate and reliable. However, Advantech Co., Ltd.

assumes no responsibility for its use, nor for any infringements upon

the rights of third parties which may result from its use.

Acknowledgements

• AWARD is a trademark of AWARD Software, Inc.

• VIA is a registered trademark of VIA Technologies Inc.

All other product names or trademarks are the properties of their

respective owners.

Part No. 2002600400

1st Edition Printed in Taiwan Jan. 2002

A Message to the Customer

Advantech customer services

Each and every Advantech product is built to the most exacting

specifications to ensure reliable performance in the harsh and

demanding conditions typical of industrial environments. Whether

your new Advantech equipment is destined for the laboratory or the

factory floor, you can be assured that your product will provide the

reliability and ease of operation for which the name Advantech has

come to be known.

Your satisfaction is our primary concern. Here is a guide to

Advantech’s customer services. To ensure you get the full benefit of

our services, please follow the instructions below carefully.

Technical support

We want you to get the maximum performance from your products. So

if you run into technical difficulties, we are here to help. For the most

frequently asked questions, you can easily find answers in your

product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone.

So please consult this manual first. If you still cannot find the answer,

gather all the information or questions that apply to your problem, and

with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most

from your Advantech products. In fact, most problems reported are

minor and are able to be easily solved over the phone.

In addition, free technical support is available from Advantech

engineers every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

elbatnosirapmocseireS4006-ACP

ledoM1A00-V4006-ACP1A00-EV4006-ACP1A00-H4006-ACP

zHM0083CAIV:UPC

✓✓ ✓

:tespihcmetsyS T331ELPollopAAIV

✓✓ ✓

:SOIB SOIBhsalFP&PdrawA

✓✓ ✓

:eziSehcaC BK462L,BK8211L

✓✓ ✓

:MARmetsyS.xaM

)stekcosnip-861X2(BG1

✓✓ ✓

troPBSU

22 2

srotcennocEDIE2

✓✓ ✓

stroplellarap1,laires2

✓✓ ✓

:AGV AGV/PGA

)ni-tliubtespihC(

✓✓ ✓

:NAL tenrehtET-esaB001/01

)C9318ketlaeR:tespihc(

✕✓✓

)evirdhgihASI(ASiH

✕✕✓

troppuSDCL

✕✕✓

Product warranty

Advantech warrants to you, the original purchaser, that each of its

products will be free from defects in materials and workmanship for two

years from the date of purchase.

This warranty does not apply to any products which have been

repaired or altered by persons other than repair personnel authorized

by Advantech, or which have been subject to misuse, abuse, accident

or improper installation. Advantech assumes no liability under the

terms of this warranty as a consequence of such events.

If an Advantech product is defective, it will be repaired or replaced at

no charge during the warranty period. For out-of-warranty repairs, you

will be billed according to the cost of replacement materials, service

time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, type of PC, CPU speed, Advantech products used, other

hardware and software used, etc.) Note anything abnormal and list

any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your

manual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

material authorization) number from your dealer. This allows us to

process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

Initial Inspection

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PCA-6004 PCI/ISA single board computer

• 1 PCA-6004 startup Manual

• 1 CD driver utility and manual (in PDF format)

• 1 FDD cable, P/N: 1701340703

• 2 UDMA 66/100 HDD cables, P/N: 1701400452

• 1 printer (parallel port) cable & COM port cable kit, P/N: 1700060305

• 1 ivory cable for PS/2 keyboard and PS/2 mouse, P/N: 1700060202

• 1 USB cable (optional), P/N 1700100170

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

We have carefully inspected the PCA-6004 mechanically and

electrically before shipment. It should be free of marks and scratches

and in perfect working order upon receipt.

As you unpack the PCA-6004, check it for signs of shipping damage.

(For example, damaged box, scratches, dents, etc.) If it is damaged or it

fails to meet the specifications, notify our service department or your

local sales representative immediately. Also notify the carrier. Retain

the shipping carton and packing material for inspection by the carrier.

After inspection, we will make arrangements to repair or replace the

unit.

Table

Chapter 1 Hardware Configuration ............................... 1

1.1 Introduction .......................................................................... 2

1.2 Features................................................................................. 3

1.3 Specifications ........................................................................ 4

1.3.1 System .........................................................................4

1.3.2 Memory .......................................................................4

1.3.3 Input/Output ................................................................4

1.3.4 VGA interface ............................................................. 5

1.3.5 Ethernet LAN ............................................................. 5

1.3.6 AC-97 Audio Interface ...............................................5

1.3.7 Industrial features ........................................................ 5

1.3.8 Mechanical and environmental specifications .............6

1.4 Jumpers and Connectors .................................................... 6

1.5 Board Layout: Jumper and Connector ................................

Locations ..................................................................................... 8

1.6 Safety Precautions ................................................................ 8

1.7 Jumper Settings ................................................................... 9

1.7.1 How to set jumpers ..................................................... 9

1.7.2 CMOS clear (J1) ....................................................... 10

1.7.3 Watchdog timer output (J2) ...................................... 10

1.8 System Memory ................................................................. 11

1.8.1 Sample calculation: DIMM memory capacity ........... 11

1.8.2 Supplementary information about DIMMs ................ 11

1.9 Memory Installation Procedures..................................... 12

Chapter 2 Connecting Peripherals ............................. 13

2.1 Primary (CN1) and Secondary (CN2) IDE Connectors 14

2.2 Floppy Drive Connector (CN3) ....................................... 15

2.3 Parallel Port (CN4) ............................................................ 15

2.4 USB Port (CN6) ................................................................. 16

2.5 VGA Connector (CN7) ...................................................... 16

2.6 10/100Base-T Ethernet Connector (CN8) .................... 17

2.7 Serial Ports (CN9: COM1; CN10: COM2) ................... 17

2.8 PS/2 Keyboard and Mouse Connector (CN11) ............. 18

2.9 External Keyboard Connector (CN12) .......................... 18

2.10 Infrared (IR) Connector (CN13) ................................... 19

2.11 CPU Fan Connector (CN14) .......................................... 19

2.12 Front Panel Connectors (CN16, CN17, CN18, CN19,

CN21 and CN29) ...................................................................... 20

2.12.1 Keyboard lock and power LED (CN16) ................. 20

2.12.2 External speaker (CN17) ........................................ 20

2.12.3 Reset (CN18) .......................................................... 21

2.12.4 HDD LED (CN19) ................................................. 21

2.12.5 SM Bus Connector (CN29)..................................... 21

2.12.6 Connecting to SNMP-1000 remote manager .......... 21

2.13 ATX Power Control Connectors (CN20 and CN21) .. 22

2.13.1 ATX feature connector (CN20) and soft power

switch connector (CN21) ................................................... 22

2.13.2 Controlling the soft power switch ............................ 23

2.14 LCD Connector (CN41) ................................................. 2 3

2.15 LCD Inverter Power Connector (CN42) ..................... 23

2.16 AC-97 Audio Interface (CN43) ..................................... 23

Chapter 3 Award BIOS Setup ...................................... 25

3.1 Introduction ........................................................................ 26

3.2 Entering Setup .................................................................... 26

3.3 Standard CMOS Setup ...................................................... 27

3.3.1 CMOS RAM backup ................................................ 27

3.4 Advanced BIOS Features................................................. 28

3.4.1 Virus Warning ............................................................ 28

3.4.2 CPU Internal Cache / External Cache...................... 28

3.4.3 CPU L2 Cache ECC Checking ................................ 29

3.4.4 First/Second/Third/Other Boot Device...................... 29

3.4.5 Swap Floppy Drive .................................................... 29

3.4.6 Boot UP Floppy Seek ................................................ 29

3.4.7 Boot Up NumLock Status ......................................... 29

3.4.8 Gate A20 Option ....................................................... 29

3.4.9 Typematic Rate Setting ............................................. 29

3.4.10 Typematic Rate (Chars/Sec) ................................... 30

3.4.11 Typematic Delay (msec) ......................................... 30

3.4.12 Security Option ........................................................ 30

3.4.13 OS Select for DRAM > 64MB ............................... 30

3.4.14 Video BIOS Shadow ............................................... 31

3.4.15 VIA C3 Clock Ratio ................................................ 32

3.5 Advanced Chipset Features ............................................. 32

3.5.1 DRAM Clock ............................................................ 33

3.5.2 SDRAM Cycle Length.............................................. 33

3.5.3 Bank Interleave ......................................................... 33

3.5.4 Memory Hole ............................................................ 33

3.5.5 P2C/P2P Concurrency .............................................. 33

3.5.6 System BIOS Cacheable........................................... 33

3.5.7 AGP Aperture Size ................................................... 33

3.5.8 Onchip USB .............................................................. 34

3.5.9 USB Keyboard Support ............................................ 34

3.5.10 USB Mouse Support ............................................... 34

3.5.11 CPU to PCI Write Buffer........................................ 34

3.5.12 PCI Dynamic Bursting ............................................ 34

3.5.13 PCI Master 0 WS Write .......................................... 34

3.5.14 PCI Delay Transaction ........................................... 35

3.5.15 PCI#2 Access #1 Retry ......................................... 35

3.5.16 AGP Master 1 WS Write ........................................ 35

3.5.17 Memory Parity/ ECC Check ................................... 35

3.6 Integrated Peripherals ...................................................... 35

3.6.1 On-Chip Primary/Secondary PCI IDE...................... 36

3.6.2 IDE Primary Master/Slave PIO/UDMA Mode, IDE

Secondary Master/Slave PIO/UDMA Mode (Auto) ......... 36

3.6.3 Init Display First ........................................................ 36

3.6.4 IDE HDD Block Mode ............................................. 36

3.6.5 Onboard FDD Controller........................................... 36

3.6.6 Onboard Serial Port 1 (3F8H/IRQ4) ......................... 36

3.6.7 Onboard Serial Port 2 (2F8H/IRQ3) ......................... 36

3.6.8 UART 2 Mode Select ............................................... 37

3.6.9 Onboard Parallel Port (378H/IRQ7) ......................... 37

3.6.10 Onboard Parallel Port Mode (ECP + EPP) ............ 37

3.6.11 ECP Mode Use DMA ............................................. 37

3.6.12 EPP Mode Select .................................................... 37

3.7 Power Management Setup ............................................... 38

3.7.1 ACPI function ........................................................... 38

3.7.2 Power Management .................................................. 38

3.7.3 PM Control by APM ................................................. 39

3.7.4 Video Off Option ....................................................... 39

3.7.5 Video Off Method ..................................................... 39

3.7.6 MODEM Use IRQ ................................................... 40

3.7.7 Soft-Off by PWRBTN .............................................. 40

3.7.8 State After Power Failure ......................................... 40

3.8 Wake Up Event .................................................................. 41

3.8.1 VGA .......................................................................... 41

3.8.2 LPT & COM............................................................. 41

3.8.3 HDD & FDD ............................................................ 41

3.8.4 Power On by LAN.................................................... 41

3.8.5 Power On by Modem ................................................ 42

3.8.6 Power On by Alarm .................................................. 42

3.9 PnP/PCI Configurations .................................................... 42

3.9.1 PnP OS Installed ....................................................... 42

3.9.2 Reset Configuration Data .......................................... 42

3.9.3 Resources controlled by: ........................................... 43

3.10 PC Health Status .............................................................. 43

3.10.1 Current CPU Temperature ...................................... 43

3.10.2 Current CPUFAN Speed ........................................ 43

3.10.3 VCORE ................................................................... 43

3.10.4 +2.5/ +3.3V/ + 5V/ +12V ........................................ 43

3.11 Load Setup Defaults ........................................................ 44

3.12 Password Setting .............................................................. 44

3.13 Save & Exit Setup ........................................................... 45

3.14 Exit Without Saving ......................................................... 45

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Advantech Matériel informatique

Advantech

Advantech ITA-460 Series Manuel utilisateur

Advantech

Advantech PCA-6275 Manuel utilisateur

Advantech

Advantech ASMB-785 Manuel d'installation et d'exploitation

Advantech

Advantech PCM-3864 Manuel d'installation et d'exploitation

Advantech

Advantech PCE-7214 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6143P Manuel utilisateur

Advantech

Advantech MIO-2375 Manuel utilisateur

Advantech

Advantech PCA-6186VE Manuel utilisateur

Advantech

Advantech PCE-5133 Manuel d'installation et d'exploitation

Advantech

Advantech PCA-6180 Series Manuel utilisateur

Advantech

Advantech PCA-6742 Series Manuel utilisateur

Advantech

Advantech POC-824 Manuel utilisateur

Advantech

Advantech ASMB-815 Series Manuel utilisateur

Advantech

Advantech PCIE-1756 Manuel utilisateur

Advantech

Advantech IPC-610B Manuel utilisateur

Advantech

Advantech PCA-6190 Manuel utilisateur

Advantech

Advantech ASMB-831 Series Manuel utilisateur

Advantech

Advantech UNO-1251G Manuel utilisateur

Advantech

Advantech PCA-6145B Manuel utilisateur

Advantech

Advantech MIC-730AI Manuel utilisateur

Advantech

Advantech ROM-8720 Manuel utilisateur

Advantech

Advantech PCL-818 Series Manuel utilisateur

Advantech

Advantech PCM-9366 Manuel d'installation et d'exploitation

Advantech

Advantech FWA-1211 Manuel d'installation et d'exploitation

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur