ADT DSC Impassa Manuel utilisateur

For a detailed review of the entire system, please view the DSC Impassa system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY] or enter

your [security code] + [*] + [0] to Quick Arm.

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +

[security code].

Disarm:

To disarm, enter your [security code].

Battery

The DSC Impassa operates on the 3600 mAh battery.

Loss of AC power and use of backup battery power is indicated by Loss of AC Power.

Quick Guide: DSC Impassa

A low battery condition is indicated by Service Required.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally left unarmed or to

access a protected area when the system is armed.

To bypass a zone, press [*] to enter the function menu.

Press [1] or [*], then your [security code].

Enter the two digit number of the zone to be bypassed or use the [<>] keys to find the zone.

Press [*] to select a zone.

To exit bypassing mode and return to Ready state, press [#].

To unbypass a zone, simply arm and disarm your system.

Change Time and Date

Press [*] + [6] + [Master security code] to enter the programming menu.

Use [<>] to find [Time and Date Programming], then press [*].

Enter the time in 24-hour format, i.e., 16:30 for 4:30pm.

Enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime will sound three tones whenever a protected door/window is

opened.

To turn the door chime function on or off, press and hold the [Chime] key for two seconds or press [*]

+ [4].

Reset

To clear the display after an alarm event, first press [*] + [3] to view the event.

To clear the event history, arm, and then disarm your system with your [security code].

To clear the display after a fire alarm, hold the [Reset] button for several seconds to clear the fire

alarm history.

Trouble Condition alarms will clear from the display when the condition no longer exists.

Security Codes

You can program up to 16 additional user codes and attributes. Additional users will be restricted to arming

and disarming functions, while the Master user code can perform all functions.

To program a new user, press [*] + [5] + [Master security code].

Enter the two digit number to be programmed, i.e., 06 for Access Code 6 or use the [<>] to find the

desired user code and press [*] to select.

Enter the new user’s new access code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, select the code using [*] as the first digit. The system will automatically erase

the access code.

Some user codes have been pre-programmed:

User Level

Explanation

User Code

Master

Can perform all functions and assign codes.

Can only be changed by

an installer.

Supervisor

Similar to Master level, but can be changed without

requiring an installer.

[1]

Duress

Code secretly sends a duress report. Any user code

can be made a Duress code.

[2]

Zone Bypassing

Can manually bypass zones and arm/disarm the

system.

[3]

Phone Access

User can specify which user codes can be used for

remote access via SMS.

[4]

For future use

Reserved for future use.

[5], [6]

Onetime User

Code

Can disarm the system once per day. Reset daily at

midnight.

[8]

Users can also be assigned attributes, like the Bell Squawk Attribute, for example, which generates a sound

when that user arms and disarms the system.

For a complete list of User Code Attributes please see the DSC Impassa system manual.

To assign user attributes, enter [*] + [5] + [Master/Supervisor code] + [9] + [user code]/[scroll to user

code] + [*] + [attribute code] + [*].

Trouble Conditions

When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep

every 10 seconds.

To view the Trouble Condition, press [*] + [2].

To silence the Trouble Condition beeps, press [#].

For a list of possible Trouble Conditions, please see the DSC Impassa system manual.

Volume

The buzzer provides audible confirmation that a command to the panel has been executed.

The buzzer has 21 different levels of volume.

To adjust the buzzer level, press [*] + [6] + [Master code].

Use the [<>] buttons to scroll to [Buzzer Control], then press [*] to select.

Use the [<>] to scroll to the desired level, then press [#] to exit.

To disable the buzzer, choose level [00].

Table des matières

Autres manuels ADT Système de sécurité

ADT

ADT SA10ADTEG Mode d'emploi

ADT

ADT Fall Detection Pendant Manuel utilisateur

ADT

ADT PowerSeries SCW9045-433 Manuel utilisateur

ADT

ADT Security System 4112 Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

ADT

ADT PremisePro none Manuel utilisateur

ADT

ADT Safewatch Pro 3000EN Instructions de montage

ADT

ADT TSSC Instructions de montage

ADT

ADT L5000 Lynx Manuel d'utilisation et d'entretien

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT iCenter 8142ADT Manuel utilisateur

ADT

ADT Safewatch Pro 3000 Guide de l'utilisateur

ADT

ADT Galaxy 8 Manuel utilisateur

ADT

ADT Security System D7412 Manuel utilisateur

ADT

ADT Safewatch Plus Entrepreneur Manuel utilisateur

ADT

ADT Safewatch Quick Connect Plus Manuel utilisateur

ADT

ADT ADT2X16AIO Instructions de montage

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

ADT

ADT Safe-N-Go Manuel utilisateur

ADT

ADT DSC Impassa Manuel utilisateur

ADT

ADT 3G Cellular Medical Alert System Manuel utilisateur

ADT

ADT ADT7AIO Series Manuel d'instructions

ADT

ADT SA10ADTEG Manuel utilisateur

ADT

ADT ADTHYBWL Series Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur