ADT Safe-N-Go Manuel utilisateur

Quick Start Guide

ADT Safe-N-Go

Getting to know your device

SOS button

Silent mode button

LED light

Speaker

Microphone

Manual test button

Lanyard hole

Charging contacts

LED light

Screw holes

Charging your device

The charging base light will glow when charging and turn solid when

fully charged.

Charging base

• Place the device on the charging base.

• Connect the USB cable from charging base to the AC adaptor.

For the first time use, please fully charge the battery for around 2-3

hours.

When the battery level falls below 20%, the device will give a voice

prompt of “low battery alarm”.

Tip

Switching the device ON/OFF

• To turn on the device: press the CALL button for 1 second, all

the LEDs will flash rapidly. The device can also be turned on

automatically by charging via magnetic USB cable or put it into

the docking station.

• To turn off the device: press and hold the side button and SOS

button together for 3 seconds until the LEDs turn off.

What do the lights mean?

Cellular signal indicator - Green

Positioning indicator - Blue

Power indicator - Red

Green Light shows a single ash

rapidly every 3 seconds

Light shows a double ash

rapidly every 3 seconds

Means The device has a stable

Cellular signal

The device is registered to

the Cellular network

Blue

Light shows

a single ash

rapidly every 3

seconds

Light shows a

double ash rapidly

every 3 seconds

Light Off

Means

The device

has no latest

location x

The device has

latest location x

The device is

not xing the

latest location

Red Red Blinking Quickly Red Off or blinking slowly

Means Battery power is lower than

20% The device is charging

Red Red ON (solid) Red shows a double ash

rapidly every 3 seconds

State Device has been fully

charged Bluetooth Low Energy

Activating an SOS alarm

Activate SOS on docking station

Press twice

Voice prompt or

Vibration indicating

SOS alert activation

When you need help, press the SOS button twice, you will hear a voice

prompt of activating an SOS alarm. Voice prompt will say “SOS alert

has been activated, click SOS to Stop”. This will prompt the Alarm

Response process. Only click SOS again in case of false alarm.

Note: Only works if ADT Safe-N-Go device is connected to the docking

station via Bluetooth and is in the proximity of 10-15 metres.

Charging contacts

LED light

SOS button

Silent Mode Button

• Double-click this button to turn off voice warnings, double-click the

button again to turn on voice warnings.

• Put device on charging base more than 30 seconds, and they will

be paired automatically via Bluetooth.

De-Activating an SOS alarm

In the case of a false alarm, press SOS button once after, you hear

a voice prompt of activating an SOS alarm. Voice prompt will say

“SOS alert has been activated, click SOS to Stop”. Only click SOS

again in case of false alarm. Voice prompt will say “Alarm has been

cancelled” to confirm.

Specifications

Cautions

• Dimension: 62mm*47mm*17mm

• Weight: 53g

• Battery: Rechargeable, 3.7V, l000mAh

• Charging voltage: 5V DC

• Waterproof: IP67

• 4 locating technologies: GPS, BLE, WIFI, LBS

Please comply with the instructions to extend the unit life:

• Don’t use & store the unit in dusty places.

• Don’t put the unit in overheated or over cooled places.

• Clean the unit with a piece of dry cloth. Don’t clean with chemicals

or detergent.

• Don’t disassemble or refit the unit.

• Using other batteries will cause an unwanted situation.

Warning: Keep the IMEI and SIM in confidential, or your privacy

may expose.

Notes

Table des matières

Autres manuels ADT Système de sécurité

ADT

ADT Safewatch Pro 3000 Mode d'emploi

ADT

ADT 6160VPADT Instructions de montage

ADT

ADT SAFEWATCH PRO Manuel utilisateur

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT Ademco Vista 20 Manuel utilisateur

ADT

ADT Safewatch Quick Connect Plus Manuel utilisateur

ADT

ADT Safewatch Plus Entrepreneur Manuel utilisateur

ADT

ADT DSC Impassa Manuel utilisateur

ADT

ADT TSSC Instructions de montage

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

ADT

ADT SASW3000EN Manuel utilisateur

ADT

ADT Security System 4112 Manuel utilisateur

ADT

ADT SA10ADTEG Manuel utilisateur

ADT

ADT 3G Cellular Medical Alert System Manuel utilisateur

ADT

ADT On-The-Go Manuel utilisateur

ADT

ADT On-The-Go Emergency Response System Manuel utilisateur

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT SA10ADTEG Mode d'emploi

ADT

ADT Safewatch Pro 3000 Manuel utilisateur

ADT

ADT Ademco Vista 20P/PSIA Manuel utilisateur

ADT

ADT BHS-4000A Manuel utilisateur

ADT

ADT IGB-02 Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Instructions de montage

ADT

ADT Fall Detection Pendant Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur