ADT Health Fall Detection Pendant Manuel utilisateur
ADT
®
Health
Fall Detection Pendant
User Guide
Table of Contents
Introduction .....................................................................................................................................................3
Putting on the Fall Detection Pendant......................................................................................................7
Testing Your Fall Detection Pendant.............................................................................................................. 8
Testing Fall Detection........................................................................................................................................ 9
Using the Fall Detection Pendant............................................................................................................11
With the Medical Alert Plus System.............................................................................................................11
With the On-the-Go Emergency Response System ..................................................................................14
To Manually Call for Help................................................................................................................................16
Fall Detection Pendant Light Indicator ........................................................................................................17
Helpful Tips to Minimize Activation While Sleeping...........................................................................18
Important Safety Information .................................................................................................................. 19
Frequently Asked Questions .................................................................................................................... 21
FCC Statement ............................................................................................................................................ 24
Technical Specifications............................................................................................................................ 26
Contact ADT ................................................................................................................................................. 27
Legal Information ........................................................................................................................................ 28
2 ADT® Health Customer Support 800.568.1216
Introduction
Thank you for choosing the ADT®Fall Detection Pendant. We welcome you to the
ADT family. If you have any questions please call our support team at
800.568.1216 . They are available 24/7/365.
The Fall Detection Pendant enables you to send an alarm to the emergency response
center when you need it by pressing the blue Emergency Help Button. It also
provides extra protection by automatically sending an alarm if you fall and are unable
to push your button.
For assistance call:
800.568.1216
Fall Detection Pendant User Guide 3
Using the Fall Detection Pendant with the ADT Health Systems
The Fall Detection Pendant is compatible with both the Medical Alert Plus and
On-the-Go Emergency Response Systems. The Medical Alert Plus System uses a
fixed Base Station that resides within your home. The On-the-Go Emergency
Response System features a portable Mobile Device that you can use inside your
home and take with you when you leave home. You can speak with an emergency
response operator using either of these two devices. The Fall Detection Pendant
itself is not capable of two-way communication.
Base Station used with
Medical Alert Plus System
Mobile Device used with
On-the-Go Emergency Response System
4 ADT® Health Customer Support 800.568.1216
This user guide describes using the Fall Detection Pendant with both of these
systems. Please remember that when we mention the Base Station, we are referring
to the Medical Alert Plus System. When we talk about the Mobile Device, we are
referring to the On-the-Go Emergency Response System.
The Fall Detection Pendant does not detect 100% of falls. If able, you should always
push the blue Emergency Help Button when you need assistance. You will find
instructions on how to set up your system in the user guide for your Medical Alert
Plus System or On-the-Go Emergency Response System.
Fall Detection Pendant User Guide 5
Fall Detection Pendant Features
Multicolor
Indicator
Emergency Help
(Blue) Button
Technical Support
Use Only
6 ADT® Health Customer Support 800.568.1216
Putting on the Fall Detection Pendant
1.
Place the Fall Detection Pendant around your neck and adjust the lanyard so that
it rests at chest level with the Pendant facing away from your body so that it is
easier for you to press.
2.
Wear the Fall Detection Pendant outside your shirt, as wearing it inside your shirt
can reduce the percentage of falls being detected.
NOTE:
Please handle your Fall Detection Pendant with care when putting it on or
taking it off, as the device may interpret this movement as a fall and activate.
If the Fall Detection Pendant does sense a fall, it sounds a series of beeps and
the red light begins flashing.
You can cancel the Fall Detection alarm by pressing and holding the blue
Emergency Help Button on the Fall Detection Pendant for approximately 5
seconds until the light flashes green once and you hear a series of beeps.
If you are unable to cancel, please tell the operator that it was a false alarm.
If you do not respond or speak to the operator, emergency help will be
dispatched.
Fall Detection Pendant User Guide 7
Testing Your Fall Detection Pendant
Please have your complete system near you at the time of testing.
NOTE: It is important that you test your system at least once a month.
1.
Firmly press the blue button on the Fall Detection Pendant one time.
An alarm is sent to the Base Station or Mobile Device.
The Base Station states, “CALL IN PROGRESS.” After the Fall Detection alarm
is received, the Base Station states, “PLEASE STAND BY FOR OPERATOR.”
The Mobile Device sounds three (3) double beeps and the red ring around the
gray Emergency button lights up for several seconds, and then fades out.
An emergency operator will speak with you through the Base Station or
Mobile Device.
2.
Tell the operator that this is not an emergency and that you are testing the system.
If you do not respond or speak to the operator and explain that you are testing
your unit, emergency help will be dispatched.
NOTE: Neither the Base Station nor the Mobile Device will transmit an emergency
call if you have already sent one within the previous two minutes.
8 ADT® Health Customer Support 800.568.1216
Testing Fall Detection
Please have your complete system near you at the time of testing.
1.
Drop the Fall Detection Pendant from a height of approximately 18 inches. The
Pendant takes 20 to 30 seconds to interpret the movement and determine if an
actual fall has occurred. If it determines that a fall has occurred:
The Fall Detection Pendant sends a signal to the Base Station or Mobile
Device.
The Fall Detection Pendant sounds a series of beeps and the light flashes red
for 20 seconds.
The Base Station states, “FALL DETECTED, PRESS AND HOLD BUTTON TO
CANCEL.”
The Mobile Device sounds three (3) double beeps and the red ring around the
gray Emergency button lights up for several seconds, and then fades out.
2.
Do not pick up the Fall Detection Pendant before the test is completed, as it may
interpret this as normal movement and cancel the test call.
Fall Detection Pendant User Guide 9
To cancel the Fall Detection test call:
Press and hold the blue Emergency Help Button on the Fall Detection Pendant
for five seconds until it flashes green once and you hear a series of beeps. The
alarm is not sent to the emergency response center.
You can also cancel the Fall Detection alarm by pressing the blue RESET button
on the Base Station. If you cancel the Fall Detection alarm, your Base Station
states, “ALARM CANCELLED.”
You cannot cancel the Fall Detection alarm with the Mobile Device. You must
press the blue button on the Fall Detection Pendant to cancel the alarm.
NOTE:
If you do not cancel the alarm during the first 20 seconds after a fall was
detected, a call will be made to the Emergency Response Center. Please tell the
operator that you are testing your system. If you do not respond or speak to the
operator and explain that this is a test, emergency help will be dispatched.
10 ADT® Health Customer Support 800.568.1216
Autres manuels pour Health Fall Detection Pendant
1
Table des matières
Autres manuels ADT Système de sécurité
ADT
ADT SAFEWATCH EZ Manuel utilisateur
ADT
ADT Ademco Vista 20P/PSIA Manuel utilisateur
ADT
ADT ADT7AIO Series Instructions de montage
ADT
ADT Safewatch QuickConnect Plus Mode d'emploi
ADT
ADT Galaxy 8 Manuel utilisateur
ADT
ADT Entrepreneur 3000EN Mode d'emploi
ADT
ADT Safewatch QuickConnect Plus Manuel utilisateur
ADT
ADT K5309V2 Manuel utilisateur
ADT
ADT Garda Response PM30 Manuel utilisateur
ADT
ADT PowerSeries SCW9045-433 Manuel utilisateur
ADT
ADT SA10ADTEG Mode d'emploi
ADT
ADT Security System 4112 Manuel utilisateur
ADT
ADT 3G Cellular Medical Alert System Manuel utilisateur
ADT
ADT On-The-Go Emergency Response System Manuel utilisateur
ADT
ADT Smart Home PM360 Manuel utilisateur
ADT
ADT TSSC Instructions de montage
ADT
ADT DSC 9047 Manuel utilisateur
ADT
ADT Safewatch Plus Enterpreneur Security Systems Manuel utilisateur
ADT
ADT Fall Detection Pendant Manuel utilisateur
ADT
ADT L5000 Lynx Manuel d'utilisation et d'entretien
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur