ADT DSC 9047 Manuel utilisateur

For a detailed review of the entire system, please view the DSC 9047 system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key

for two seconds, or enter your [security code] and exit before the exit delay expires.

To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for

two seconds, or enter your [security code] and do not leave the premises.

Disarm:

To disarm, enter your [security code] before the entry delay expires.

Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Quick Guide:

DSC 9047

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, the function menu by pressing [*] again to reach [Zone Bypass].

Press either [1] or [*], then your [security code].

Enter the zone number to be bypassed or use the [<] [>] keys to locate the zone number + [*]

When a zone is correctly bypassed, a [B] will appear next to the zone number on the display.

Press [#] to exit.

To unbypass, repeat the bypass procedure on arm and disarm your system.

Change Date and Time

To change date and time:

Press [*] + [6] + [Master security code] + [1].

Use the [<] [>] to find the [Time and Date] menu option, then press [*] to select.

Enter the minutes and hours in 24-hour format, i.e., 16:34 for 4:45 pm.

Enter the date, months, and year in MM:DD:YY format, i.e., 082317 for August 13, 2017.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, hold [CHIME] for several seconds or press [*] + [4].

Reset

To clear the display after an alarm event, arm and disarm your system.

Security Codes

Your system allows for up to 16 additional users, however only the Master user can program user codes and

attributes.

To program a new user, press [*] + [5] + [Master security code].

Enter the two-digit number to be programmed, i.e., 06 for Access Code 6.

Enter the new user’s new code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, press [*] + [5] [Master code] + [user access code] + [*].

Press [#] to exit.

Trouble Conditions

When a Trouble Condition is detected, the word ‘FAULT’will be displayed on the panel.

To view the Trouble Condition, press [*] + [2] and use the [<] [>] to scroll.

To silence the Trouble Condition beeps, press [#].

Volume

To adjust the buzzer volume level, press [*] + [6] + [Master code].

Use the [<] [>] keys to scroll to [Buzzer Control] and then press [*].

Once the desired volume has been selected, press [#] to save the selection.

Table des matières

Autres manuels ADT Système de sécurité

ADT

ADT Ademco Vista 20P/PSIA Manuel utilisateur

ADT

ADT iCenter 8142ADT Manuel utilisateur

ADT

ADT 3G Cellular Medical Alert System Manuel utilisateur

ADT

ADT Safewatch Pro 3000EN Instructions de montage

ADT

ADT SECURITY MANAGER 2000 Manuel utilisateur

ADT

ADT Garda Response PM30 Manuel utilisateur

ADT

ADT PremisePro none Manuel utilisateur

ADT

ADT Safewatch QuickConnect Plus Mode d'emploi

ADT

ADT IGB-02 Manuel utilisateur

ADT

ADT SA10ADTEG Mode d'emploi

ADT

ADT SASW3000EN Manuel utilisateur

ADT

ADT 6160VPADT Instructions de montage

ADT

ADT ADTHYBWL Series Manuel utilisateur

ADT

ADT Health Fall Detection Pendant Manuel utilisateur

ADT

ADT Safewatch Pro 3000 Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Instructions de montage

ADT

ADT On-The-Go Emergency Response System Manuel utilisateur

ADT

ADT FOCUS CADET Manuel utilisateur

ADT

ADT BHS-3000C Manuel utilisateur

ADT

ADT L5000 Lynx Manuel d'utilisation et d'entretien

ADT

ADT PowerSeries SCW9045-433 Manuel utilisateur

ADT

ADT Smart Home PM360 Manuel utilisateur

ADT

ADT Safe-N-Go Manuel utilisateur

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur