ADLINK Technology NuPRO-840 DV Manuel utilisateur

NuPRO-840 DV/LV

Full-Size PICMG, mPGA478 Pentium 4,

Intel 845 DDR with SiS305 and Gigabit LAN

Single Board Card

User’s Guide

Recycle Paper

Manual Rev. 1.00: August 1, 2002

Part Number: 50-13030-100

The information in this document is subject to change without prior notice

in order to improve reliability, design and function and does not represent

a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special,

incidental, or consequential damages arising out of the use or inability to

use the product or documentation, even if advised of the possibility of

such damages.

This document contains proprietary information protected by copyright

laws. All rights are reserved. No part of this manual may be reproduced

by any mechanical, electronic, or other means in any form without prior

written permission of the manufacturer.

Trademarks

NuPROis a registered trademark of ADLINK Technology Inc. Other

product names mentioned herein are used for identification purposes only

and may be trademarks and/or registered trademarks of their respective

companies.

Getting service from ADLINK

•Customer Satisfaction is the most important priority for ADLINK Tech

Inc. If you need any help or service, please contact us.

ADLINK Technology Inc.

Web Site http://www.adlinktech.com

Sales & Service

[email protected]

NuDAQ + USBDAQ [email protected]

Automation [email protected]

NuIPC nuipc@adlinktech.com

Technical

Support

NuPRO / EBC [email protected]

TEL +886-2-82265877 FAX +886-2-82265717

Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan.

•Please email or FAX us of your detailed information for a prompt,

satisfactory and constant service.

Detailed Company Information

Company/Organization

Contact Person

E-mail Address

Address

Country

TEL FAX

Web Site

Questions

Product Model

Environment to Use

OS:

Computer Brand:

M/B: CPU:

Chipset: BIOS:

Video Card:

Network Interface Card:

Other:

Detail Description

Suggestions to ADLINK

Table of Contents•i

Table of Contents

Tables.......................................................................................................................iv

Figures.......................................................................................................................v

Introduction..............................................................................................................1

Product Description............................................................................................1

Features .....................................................................................................2

Functional Blocks and Main Board..................................................................3

Functional Block...........................................................................................3

Main Board....................................................................................................4

Intel Pentium 4 Processor...........................................................................5

Memory..........................................................................................................5

PCI-to-ISA Bridge.........................................................................................5

Dual Ethernet Interfaces.............................................................................6

VGA Interface...............................................................................................6

IDE Hard Drive.............................................................................................6

SerialI/O........................................................................................................6

Interrupts.......................................................................................................7

DMA ...............................................................................................................7

Real-Time Clock...........................................................................................7

Watchdog Timer...........................................................................................8

IEEE-1284 Parallel Port/Printer Interface................................................8

Universal Serial Bus (USB)........................................................................8

IDE Controller and Floppy Interface Controller.......................................8

Keyboard/Mouse Controller........................................................................9

Software.........................................................................................................9

Getting Started.....................................................................................................10

Unpacking ..................................................................................................10

System Requirements ....................................................................................11

Electrical and Environmental...................................................................11

Memory Configuration..............................................................................12

I/O Configuration.......................................................................................13

BIOS Configuration Overview.................................................................14

Operating System Installation.................................................................15

ii •Table of Contents

Configuration........................................................................................................16

Switch and Jumper Pins.................................................................................16

Switch Description....................................................................................17

Reset.......................................................................................................................18

Reset Types and Sources..............................................................................18

Hard Reset Sources.................................................................................18

Soft Reset Sources...................................................................................18

System Monitoring and Alarms.......................................................................20

SMBus Address Map......................................................................................20

Chassis Intrusion.............................................................................................20

IDE Controller.......................................................................................................21

Features of the IDE Controller.......................................................................21

Disk Drive Support..........................................................................................21

IDE Channel...............................................................................................21

I/O Mapping ..................................................................................................22

Device Drivers..................................................................................................22

Watchdog Timer...................................................................................................23

Watchdog Timer Overview.............................................................................23

Watchdog Timer Architecture..................................................................23

Using the Watchdog in an Application.........................................................24

Watchdog Reset........................................................................................24

Driver Installation ................................................................................................27

Intel 845D Chipset Hardware Configuration File Installation....................27

Installing Hardware Configuration Files.................................................28

VGA Driver Installation...................................................................................29

Installing Drivers for Windows 98/ME/NT/2000...................................29

LAN Driver Installation....................................................................................31

Driver Installation on Windows 2000/XP...............................................31

Driver Installation on Windows 98/98SE/ME........................................31

Driver Installation on Windows NT.........................................................32

Table of Contents•iii

Specifications.......................................................................................................33

Electrical ..................................................................................................33

Environment ..................................................................................................35

Mechanical ..................................................................................................36

Board Dimensions.....................................................................................36

Jumpers & Connectors......................................................................................37

Clear CMOS Jumper –JP1.....................................................................39

VGA Connector –CN9.............................................................................39

Keyboard/Mouse Connector –CN17.....................................................39

LAN1 RJ-45 Connector –CN13.............................................................40

LAN1 LED status.......................................................................................40

10/100/1000 LAN2 RJ45 Connector –CN22.......................................40

LAN2 LED status.......................................................................................41

SMBus Connector –CN8........................................................................41

AC’97 Connector –CN6..........................................................................41

Dual USB Connector –CN11..................................................................42

COM1 and COM2 Pin Header –CN4 & CN2.......................................42

Floppy Connector –CN5.........................................................................44

Primary IDE Connector–CN1.................................................................45

Secondary IDE Connector–CN3...........................................................46

FAN Connector –FN1, FN2, FN3..........................................................47

IrDA Connector –CN10...........................................................................47

Thermal Connector –CN12....................................................................47

Front-Panel Header –CN16....................................................................48

External Keyboard Connector –CN18..................................................49

CASE Open Connector –JP2.................................................................49

NuPRO-840 Comparison Table ........................................................................50

Warranty Policy....................................................................................................51

iv •Tables

Tables

Table 1: Power consumption with P4-2.4GHz and 1024MB RAM...11

Table 2: Memory Address Map Example.............................................12

Table 3: I/O Address Map.......................................................................13

Table 4: Switch Cross-Reference Table..............................................16

Table 5: JP1 (Clear CMOS Content)....................................................17

Table 6: SMBus Slave Devices.............................................................20

Table 7: Cross-reference table for figure 6..........................................38

Table 8: Clear CMOS Jumper................................................................39

Table 9: VGA Connector Pin Assignment............................................39

Table 10: Pinout of PS/2 connector........................................................39

Table 11: Pinout of LAN1 RJ-45..............................................................40

Table 12: LAN LED status ........................................................................40

Table 13: Pin Definition of Gigabit LAN2 RJ-45....................................40

Table 14: LAN2 LED status......................................................................41

Table 15: Pin Assignment of SMBus Connector...................................41

Table 16: Pinout of AC’97 Connector.....................................................41

Table 17: Pin Assignment of the USB Connector.................................42

Table 18: COM Connector Pin Assignment...........................................42

Table 19: Pin Assignment of Parallel Port Connector..........................43

Table 20: Pin Assignment of FDD Connector........................................44

Table 21: Pin Assignment of Primary IDE Connector..........................45

Table 22: :Pin Assignment of Secondary IDE Connector....................46

Table 23: Pinout of the Fan Connector...................................................47

Table 24: Pinout of the Fan Connector...................................................47

Table 25: Pinout of the Thermal Connector...........................................47

Table 26: Pinout of the Front Panel Header..........................................48

Table 27: Pinout of the External Keybard Connector...........................49

Table 28: Pinout of the Fan Connector...................................................49

Table 29: NuPRO-840 Comparision table..............................................50

Figures •v

Figures

Figure 1: NuPRO-840 Functional Block Diagram...................................3

Figure 2: Main Board Diagram...................................................................4

Figure 3: BIOS Setup Screen...................................................................14

Figure 4: Location of Jumpers..................................................................16

Figure 5: Watchdog Timer Architecture..................................................23

Figure 6: Board Dimensions.....................................................................36

Figure 7: Location items on the NuPRO-840.........................................37

vi •How to Use This Guide

How to Use This Guide

This manual is attended for users of the NuPRO-840 SBC as a source of

information to setup and maintain a working system. This manual gives

the user information on specifications, connector types and how to install

the different drivers to keep the system running at its optimum level. The

manual is divided into 8 chapters with appendixes:

Chapter 1, “Introduction”, introduces the key features of the NuPRO-

840. This chapter includes a product definition, a list of

product features, and a functional block diagram with a

brief description of each block

Chapter 2, “Getting Started”, provides setup information for the

NuPRO-840. This chapter summarizes what you need to

know in order to configure your system and should be read

before attempting to use the board.

Chapter 3,“Configuration”, discusses the configurable jumpers on

the NuPRO-840. This chapter details factory default

settings and provides information about tailoring the board

to the needs of specific applications.

Chapter 4, “Reset”, discusses the reset types and reset sources on

the NuPRO-840.

Chapter 5, “System Monitoring and Alarms”, explains how to

access various system-monitoring devices and alarming

functions on the NuPRO-840.

Chapter 6, “IDE Controller”, provides an introduction to the cPCI-

NuPRO-840's IDE Controller. This chapter covers drive

configuration, IDE I/O mapping, device drivers, and the

NuPRO-840's support for internal and external disk drives.

Chapter 7, “Watchdog Timer”, explains the operation of the NuPRO-

840's watchdog timer. A sample code is provided to

illustrate how the watchdog’s functions are used in an

application.

Chapter 8,“Driver Installation”, provides step-by-step instructions

how to install the software drivers successfully.

Appendix A, “Specifications”, contains electrical, environmental, and

mechanical specifications for the NuPRO-840.

Appendix B, "Jumpers & Connectors," outlines all the jumpers and

connectors on the NuPRO-840 and it pin definition

Appendix C, “NuPRO-840 Comparison Table”, lists the differences

between the different models of the NuPRO-840.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ADLINK Technology Matériel informatique

ADLINK Technology

ADLINK Technology ETX-BT Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-KL Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3020 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology CSA-7210 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-A331 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuDAQ ACL-8454 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3620 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-KL2 Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC NXP LEC-IMX8M Manuel utilisateur

ADLINK Technology

ADLINK Technology COM Express nanoX-TC Manuel utilisateur

ADLINK Technology

ADLINK Technology MCM-216 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-A3515 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology PCI-3488 Manuel utilisateur

ADLINK Technology

ADLINK Technology PCIe-U30 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology COM Express cExpress-TL Manuel utilisateur

ADLINK Technology

ADLINK Technology AMC-7000 Manuel utilisateur

ADLINK Technology

ADLINK Technology nanoX-AL Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Manuel du propriétaire

ADLINK Technology

ADLINK Technology COM Express Type 7 Starter Kit Plus Manuel utilisateur

ADLINK Technology

ADLINK Technology Express-BD74 Manuel utilisateur

ADLINK Technology

ADLINK Technology aTCA-9710 Manuel utilisateur

ADLINK Technology

ADLINK Technology DLAP-211-JNX Series Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3-TL Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cExpress-KL Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur