Addonics Technologies UDFUDD7 Manuel utilisateur

CONTACT US

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 5:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

www.addonics.com

Phone: 408-573-8580

Email: http://www.addonics.com/sales/query/

1:7 ATA Flash Duplicator

Model: UDFUDD7

www.addonics.com

Technical Support (M-F 8:30am - 5:00pm PST) Phone: 408-453-6212 Email. www. Addonics.com/support/query/

Default settings on the duplicator:

Copy – set to WHOLE MEDIA. This setting copies everything in the source drive to the target

drive sector by sector. This setting ensures a good copy of any drives: boot drive, blank

drive, encrypted drive or drive with any file system.

To speed up the copying, you may change the setting to SYSTEM and FILES. This setting skips

copying sectors with no recognizable data. This is only for drives that have the following file

system: NTFS, FAT/16/32, eXFAT, HFS, EXT3/4 or XFS. This setting is not recommended for

copying boot drive as certain boot sectors may not be copied correctly.

Performance – set to SPEED for best performance. May encounter compatibility issue with

certain old model HDD. Should that occur, try to change the setting to BALANCE or

COMPATIBILITY.

Please review the Compact USB duplicator Controller user manual for all the detail settings.

Making duplicates

Front view

REAR view

Making duplicates

Check to make sure the power switch on the back of the unit is set to the ON position.

Power up the unit by pressing on the ON/OFF button at the front lower right- hand

corner. Once the unit is ready, the LCD should display

HDD Duplicator

1. Copy

The unit is now ready. Simply loads a source drive to the source slot (the first slot on the

top) and the target drives to the seven target slots (the seven slots below the source slot).

After a few seconds, the LCD should display the number of target media detected. Press

the OK button on the LCM control panel to start the copying.

Note: some media may not be detected correctly. In that case, please leave the media

inside the unit and re-start the duplicator.

WARNING

Be sure to set the 110/240V

switch to the correct setting

to your local outlet before

powering on the unit. Wrong

setting may cause damage

to the power supply

Autres manuels Addonics Technologies duplicateur de disques

Addonics Technologies

Addonics Technologies ST55HPMXA Manuel utilisateur

Addonics Technologies

Addonics Technologies Jasper II 3M Manuel utilisateur

Addonics Technologies

Addonics Technologies ZHDUESA Manuel utilisateur

Addonics Technologies

Addonics Technologies Jasper II SID Manuel utilisateur

Addonics Technologies

Addonics Technologies HDMU3 Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBRC3 Manuel utilisateur

Addonics Technologies

Addonics Technologies HD9SITDRHS Manuel utilisateur

Addonics Technologies

Addonics Technologies CFASTD5 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUSI325-A Manuel utilisateur

Addonics Technologies

Addonics Technologies DGC3 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS11NB Manuel utilisateur

Addonics Technologies

Addonics Technologies DigiCopier III DGC3 Manuel utilisateur

Addonics Technologies

Addonics Technologies Jasper II JD2P3 Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFH7 Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBRC7 Manuel utilisateur

Addonics Technologies

Addonics Technologies ST5DVRE Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFH15-C Manuel utilisateur

Addonics Technologies

Addonics Technologies JD2-3SN25 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUSAS Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS11SNDX Manuel utilisateur

Addonics Technologies

Addonics Technologies AEDVDCOPPM4U Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFHNVM7 Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBR4DR11 Manuel utilisateur

Addonics Technologies

Addonics Technologies MSHDU11T Manuel utilisateur

Manuels duplicateur de disques populaires d'autres marques

Riso

Riso CV Series Manuel

MicroBoards Technology

MicroBoards Technology GX-2 Manuel utilisateur

Carry

Carry Pro118 Manuel utilisateur

CopyPro

CopyPro PowerPro II Manuel utilisateur

Primera

Primera Max Manuel utilisateur

Logicube

Logicube EchoPlus-NG Manuel utilisateur

Silca

Silca Delta 2000 SA Manuel utilisateur

Reflex7

Reflex7 Daisy Chain Series Manuel utilisateur

Vinpower Digital

Vinpower Digital SharkCopier DC Manuel utilisateur

Codonics

Codonics Virtua E Manuel utilisateur

Octave

Octave Copy Master II Manuel utilisateur

Kanguru

Kanguru U2-DVDDUPE-S Manuel utilisateur

StarTech.com

StarTech.com 8STSATDUP11 Manuel utilisateur

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuel utilisateur

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuel utilisateur

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manuel utilisateur

Telex

Telex SpinWise Manuel utilisateur

Aleratec

Aleratec 260206 Manuel utilisateur