Addonics Technologies JD2-3SN25 Manuel utilisateur

CONTACT US

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Jasper II 3S2 – 1:3 2.5” HDD/SSD

High Speed duplicator

Model: JD2-3SN25

Default settings on the duplicator:

Copy – set to copy system and file. This is for drives that have the following

file system: NTFS, FAT/16/32, eXFAT, HFS, EXT3/4 or XFS. For other file

systems and boot drives, you may need to change the setting to WHOLE

MEDIA

Performance – set to SPEED for best performance. May encountered

compatibility issue with certain SSD. Should that occur, try to change the

setting to BALANCE or COMPATIBILITY.

HPA – set to SKIP.

Please review the Jasper II Duplicator user guide for all the detail settings.

Making duplicates

Power up the unit by pressing on the ON/OFF button at the front lower right-

hand corner. Once the unit is ready, the LCD should display

HDD Duplicator

1. Copy

The unit is now ready. Simply load a source drive to the source slot (the first

bay on the top) and up to three target drives to the target slots (the three lower

bays). After a few seconds, the LCD should display the number of target drives

detected. Press the OK button on the LCM control panel to start the copying.

Note: some drives may not be detected correctly. In that case, please leave the

drive inside the unit and re-starting the duplicator.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email. www. Addonics.com/support/query/

Overview

WARNING

Be sure to set the 110/240V

switch to the correct setting

to your local outlet before

powering on the unit. Wrong

setting may cause damage

to the power supply

Package content:

•Jasper II 1:3 duplicator main unit

•One power cord

•One 12-in eSATA cable (use for

daisy chaining to another Jasper

II duplicator)

•This quick start user guide

•Jasper II duplicator user guide

Rear view

Ce manuel convient aux modèles suivants

1

Autres manuels Addonics Technologies duplicateur de disques

Addonics Technologies

Addonics Technologies HDUS11325DX Manuel utilisateur

Addonics Technologies

Addonics Technologies ST55HPMXA Manuel utilisateur

Addonics Technologies

Addonics Technologies ST5DVRE Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBRC7 Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFH15-C Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFUDD7 Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBR4DR11 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS325DX Manuel utilisateur

Addonics Technologies

Addonics Technologies CFASTD5 Manuel utilisateur

Addonics Technologies

Addonics Technologies HD9SITDRHS Manuel utilisateur

Addonics Technologies

Addonics Technologies DGC3 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUS11SNDX Manuel utilisateur

Addonics Technologies

Addonics Technologies DDU3SAS Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUSI325 Manuel utilisateur

Addonics Technologies

Addonics Technologies Jasper II JD2P3 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUSAS Manuel utilisateur

Addonics Technologies

Addonics Technologies ST5BDVES Manuel utilisateur

Addonics Technologies

Addonics Technologies UDFHNVM7 Manuel utilisateur

Addonics Technologies

Addonics Technologies MSDU5 Manuel utilisateur

Addonics Technologies

Addonics Technologies M2MSHD9H-2S Manuel utilisateur

Addonics Technologies

Addonics Technologies DigiCopier III DGC3 Manuel utilisateur

Addonics Technologies

Addonics Technologies HDUSI325-A Manuel utilisateur

Addonics Technologies

Addonics Technologies Jasper II 3M Manuel utilisateur

Addonics Technologies

Addonics Technologies DGBRC1 Manuel utilisateur

Manuels duplicateur de disques populaires d'autres marques

Riso

Riso CV Series Manuel

MicroBoards Technology

MicroBoards Technology GX-2 Manuel utilisateur

Carry

Carry Pro118 Manuel utilisateur

CopyPro

CopyPro PowerPro II Manuel utilisateur

Primera

Primera Max Manuel utilisateur

Logicube

Logicube EchoPlus-NG Manuel utilisateur

Silca

Silca Delta 2000 SA Manuel utilisateur

Reflex7

Reflex7 Daisy Chain Series Manuel utilisateur

Vinpower Digital

Vinpower Digital SharkCopier DC Manuel utilisateur

Codonics

Codonics Virtua E Manuel utilisateur

Octave

Octave Copy Master II Manuel utilisateur

Kanguru

Kanguru U2-DVDDUPE-S Manuel utilisateur

StarTech.com

StarTech.com 8STSATDUP11 Manuel utilisateur

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manuel utilisateur

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manuel utilisateur

MicroBoards Technology

MicroBoards Technology Quic Disc QD-2 Manuel utilisateur

Telex

Telex SpinWise Manuel utilisateur

Aleratec

Aleratec 260206 Manuel utilisateur