ADC Double Pair/Line Power HDSL Manuel utilisateur

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Spec Sheet

WorldDSL™HDSL

Economical, Reliable, and Manageable E1 and Serial Data Deployment

ADC's WorldDSL™HDSL Solutions are designed for the copper cable-based E1 (G.703) and Serial

data (V.35, V.36,RS-530, and X.21) access needs of Global markets and are ideal for both telco

and enterprise networks. WorldDSL HDSL Line and Universal Terminating Units can be used

in a managed central office (CO) or enterprise data-center based type chassis or in single slot

enclosures. WorldDSL HDSL Element Doubler Units are used outdoors between the central office

and the customer to extend the range and reach of HDSL when needed.

WorldDSL HDSL is part of a fully manageable system. Using a VT100 compatible terminal or a PC,

the units can be managed via their local craft ports. When used in a WorldDSL Element Managed

Shelf (EMS) and an Element Management Unit (EMU), the entire system can be managed locally or

remotely through a dial-up modem or Ethernet network.

The HDSL line cards come in span powering Line Terminating Unit (LTU) and Universal Terminating

Unit (UTU) versions. The LTU central office unit is locally powered and can span power a remote

UTU version. The UTU card can be used universally as a locally powered CO/LTU or as a local or

span powered remote/Network Terminating Unit (NTU). LTUs and UTUs can be mounted in a

16-slot EMS or a single slot Element Remote Enclosure (ERE).

The WorldDSL HDSL Element Doubler Unit (EDU) can be used to greatly increase the service area

range. The EDU is line powered by a WorldDSL LTU. Up to two EDUs can be installed in a circuit,

each of which will extend the reach of the circuit. For example, if, based on the current circuit

noise and wire gauge, the reach is 3.2 Km, adding one EDU can extend reach to 6.9 Km and a

second can extend reach to 7.5 Km. The EDU is suitable for outdoor use and is mounted in one of

ADC's weatherproof enclosures such as the single HRE-602 (holds one EDU) or Radiator (holds 6

to 8 EDUs). The EDU features a front panel LED for easy verification of operation during installation

and troubleshooting that is externally visible when used with the HRE-602 enclosure. ADC's

doubler enclosures also feature integrated gas tubes for lightning and power cross protection.

Element Doubler UnitLine and Universal Terminating Units

11/08 • 106805AE WorldDSL™HDSL

WorldDSL™HDSL

Economical, Reliable, and Manageable E1 and Serial Data Deployment

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Features

Fiber optic quality (BER 10• -10)

LTUs can provide line powering for up to two•

doublers for very long reach loops

LTUs can provide wetting current to reduce•

corrosion of connections

Point-to-multipoint conﬁgurations where a single•

central ofﬁce card can operate two 1 Mbps

remote NTUs each via a single twisted pair to

reduce system costs

User software selectable dataport interface•

Single pair mode where the unit uses only one pair•

at a maximum rate of 1Mbps

Timeslot priority mode where, if one of the two•

HDSL pairs fails, the FAS, signaling and ﬁrst 15 voice

channels are switched to the operating pair

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 1

Single Span Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 3

3 Span Two Doublers Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 2

2 Span Single Doubler Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 1

Single Span Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 3

3 Span Two Doublers Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 2

2 Span Single Doubler Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 1

Single Span Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 3

3 Span Two Doublers Reach

0.91 mm0.40 mm 0.51 mm 0.64 mm

RANGE (KILOMETERS)

MAXIMUM

TYPICAL

MINIMUM

Wire Gauge (mm)

Figure 2

2 Span Single Doubler Reach

G.703

120/75Ω

Serial

V.35/V.36/RS-530/X.21

G.703

120/75Ω

Serial

V.35/V.36/RS-530/X.21

LTU or

UTU UTU*

UTU**LTU

7.5 Km on 0.4 mm

12.5 Km on 0.64 mm

3.2 Km on 0.4 mm

5.3 Km on 0.64 mm

E1 (G.703)

120/75Ω

Serial

V.35/V.36/RS-530/X.21

E1 (G.703)

120/75Ω

Serial

V.35/V.36/RS-530/X.21

Typical Single Span Applications

Typical 3-Span Extended Reach with doublers line powered and remote UTU locally powered

EDU EDU

* Can be line powered from LTU or AC or DC local powered

** AC or DC local power required

11/08 • 106805AE WorldDSL™HDSL

WorldDSL™HDSL

Economical, Reliable, and Manageable E1 and Serial Data Deployment

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Specifications

HDSL Interface

Line Code: 2B1Q

Line Rate: 1168 kbps on each pair

Output: 13.5 dBm ± 0.5 dB

Maximum Provisioning Loss: 35 dB at 292 kHz

Range: See Figures 1, 2 and 3

HDSL Connector: See specific enclosure for external DSL interface connection type

Secondary Protection: Provided on LTU, UTU, and EDU

LTU/UTU Protection Compliance: ITU-T K.20 and K.21 compliant when used in

ADC Chassis and Enclosures

EDU Protection Compliance: ITU-T K.17

EDU Primary Protection: Integrated gas discharge tubes when used in EDU enclosures

EDU Protection Compliance: ITU-T K.17 when used in ADC enclosures

Other Compliances: ETSI TS101135 and ITU-T G.991.1

E1 Interface

Line Code: HDB3

Data Rate: 2048 kbps

Operation: Full or fractional

Blocking: Per 64 kbps channel

Idle Code Insertion: User selectable word

Impedance: 120 Ωbalanced or 75 Ωunbalanced

Framing: Structured with or without CRC-4 or unstructured

Connectors: Both D15F (balanced) and BNC (unbalanced)

Timing: G.703 or external

Compliance: ITU-T G.703, G.704, G.706, G.821, G.823, CTR12

Data Interface

User software selectable as: V.35, V.36, RS-530, X.21

Connector: D25F (adapters available)

Timing: Internal, external, Nx64k, HDSL

Compliance: Net 2

Performance Monitoring

HDSL: Noise margin, pulse attenuation, ES, UAS

E1: ITU-T G.821

Alarms: Form C relay contacts

HDSL Loopbacks: LTU or UTU local or remote towards Network or Customer EDU

towards Network

E1 and Serial Data Loopbacks: Local or remote towards Network or Customer

Test Pattern: PRBS generator and BER meter

Power

Input Power: - 36 to -72VDC for LTU and UTU when locally powered

75VDC to 120VDC Tip to Ring for UTU or EDU when

span powered from LTU

Power Consumption: 5W for line or locally powered UTU

5W for LTU with line powering off

15W for LTU with line powering on

2.5W for line powered EDU

Physical

LTU and UTU Dimensions (HxWxD): 6.89" x 0.925" x 8.45" (175 mm x 24 mm x 215 mm)

Weight

LTU: 0.81 lbs. (0.37 Kg)

UTU: 0.61 lbs. (0.28 Kg)

EDU Dimensions (HxWxD): 2.6" x 1.46" x 6.5" (66 mm x 37 mm x 165 mm)

EDU Weight: 1.8 lbs. (0.82 kg)

Spec Sheet

Website: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080

Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously

improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may

verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.

views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features

contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

LTU Chassis and Enclosures: EMS-830 L2 or EMS-832 L2 Central Office 16 slot shelf

ERE-811 L5 single slot desktop enclosure

EDU Outdoor Enclosures: HRE-602 L1 above ground, hold one EDU

RAD-AG30-8 above ground, vented, holds 4-6 EDUs

RAD-BA30-8 below ground, pressurized, holds 4-6 EDUs

RAD-AG30-16 above ground, vented, holds 8 EDUs

RAD-BA30-16 below ground, pressurized, holds 8 EDUs

Note: All Have Integrated Gas Discharge Tube protection

Environmental

Operating Temperature: -5º C to +50º C (LTU and UTU), -40º C to +65º C (EDU)

Storage Temperature: -40º C to +85º C

Humidity: Up to 95% RH non-condensing

Regulatory

CE marked

Safety: EN60950

Emissions and Immunity: EN 300386-2

Description Catalog Number

Line Terminating Unit, locally with span powering, E1+serial

(G.703+V.35, V.36, RS-530, X.21)

LTU-804 L1C

Universal Terminating Unit, locally or span powered by LTU, E1+serial

(G.703+V.35, V.36, RS-530, X.21)

UTU-804 L1C

Element Doubler/Regenerator Unit, span powered by LTU, double-wide 239 mechanics EDU-840 L3

Ordering Information

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ADC Matériel réseau

ADC

ADC Active Digital Signal Cross-Connect ASX Manuel utilisateur

ADC

ADC PG-PLUS PLL-720 Instructions d'utilisation

ADC

ADC HiGain HDSL2 Manuel utilisateur

ADC

ADC HiGain HLU-200 Manuel utilisateur

ADC

ADC Migration Modules DSX-3 Manuel utilisateur

ADC

ADC DSX-1 Manuel utilisateur

ADC

ADC Cross-Connect Family FlexDSX Manuel utilisateur

ADC

ADC H2TU-C-388 HiGain Manuel utilisateur

ADC

ADC Soneplex P-61-743 Manuel utilisateur

ADC

ADC LoopStar 750 Manuel utilisateur

ADC

ADC Double Pair/Line Power G.SHDSL WorldDSL G.S Manuel utilisateur

ADC

ADC WorldDSL UTU-702C Manuel utilisateur

ADC

ADC HiGain HMS-317 List 2 Manuel utilisateur

ADC

ADC H2TU-C-388 HiGain Instructions d'utilisation d'origine

ADC

ADC LSA-PLUS NT Manuel utilisateur

ADC

ADC OmniReach MDU Rapid Fiber System Manuel utilisateur

ADC

ADC Campus-RS REX2 Manuel utilisateur

ADC

ADC PG-FlexPlus AMU-912 Manuel utilisateur

ADC

ADC HiGain HLU-432 Manuel utilisateur

ADC

ADC H2TU-C-388 HiGain Manuel utilisateur

ADC

ADC H2TU-C-202 Instructions d'utilisation d'origine

ADC

ADC FlexWave MMW 125 Manuel utilisateur

ADC

ADC H2TU-C-202 Instructions d'utilisation d'origine

ADC

ADC FlexWave WMX 100/105 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur

Lanner

Lanner NCA-1525 Manuel utilisateur