Adaptec P Class 733/800/866MHz / 1GHz Manuel utilisateur

Hewlett-Packard Company

3404 East Harmony Road

Fort Collins, Colorado 80528

HP Pub. No. A8031-90001

Read Before Installing

Adaptec SCSI RAID 2100S

HP Product No. A8031A

NOTE: The installation of the SCSI RAID card will delete data on your system. A backup will be

needed to retain any of the data stored in your current hard disks.

If you have the hp workstation x4000 recovery CD (pn A6068-92101) it does not include the SCSI RAID

driver. To install Windows 2000 you will need the updated version of the hp workstation x4000 recovery

CD (pn A6068-91018). For the updated CD please contact any support center listed in the following

URL: http://welcome.hp.com/country/us/eng/contact_us.htm.

To successfully install the Adaptec RAID card, driver and software, you will need:

1. The Adaptec RAID 2100S CD

2. The Adaptec RAID 2100S card

3. hp workstation x4000 Recovery CD

4. Adaptec RAID Installation Guide found on the Adaptec RAID 2100S CD or can also be found at

http://www.hp.com/workstations/support/documentation/win_manuals.html

NOTE: This procedure is for workstations that either do not have an operating system installed or in which a

RAID system is being created with an operating system already installed. If your operating system is already

installed, you must back up your data before proceeding with the RAID installation procedure.

For a detailed description of the installation process, refer to the Adaptec RAID Installation Guide.

Hardware Installation

1. Turn off your workstation and remove the power cord from the back.

2. Remove the side cover.

3. Disconnect the SCSI cable from the system board.

4. Install the RAID card in any of the three 33MHz slots closest to the processor.

5. Connect the SCSI cable to the SCSI RAID card.

6. Reinstall the side cover and connect power cord to your workstation.

01/29/02

A8031- 90001

RAID Conﬁguration

1. Turn on your system and press ESC to remove the hp splash screen.

2. Enter the Adaptec setup utility (SMOR), after the Adaptec banner appears press CRT+A when prompted.

NOTE: To navigate the SMOR menu use the arrow and/or TAB keys to move between ﬁelds.

3. Select the RAID 2100s controller.

4. Check for two or more available drives to create the RAID array.

5. Open the RAID menu by pressing ALT+R (ALT+RAID) and select Create, then press Enter.

6. Select the RAID type (0or 1(1is the default)). Select OK to exit the screen.

7. Select at least two open devices. (Use the up/down arrow keys to select the device names then press Enter.)

Selected devices are checkmarked before the device name.

8. Select Done when ﬁnished. If a Build Option appears, follow the instructions. The Build Option will not

appear for RAID 0.

9. Press Alt+F and select Set System Configuration to save your new conﬁguration.

Operating System Installation

1. Insert into the CD drive the hp x4000 system recovery CD.

2. Press ALT+F to exit the SMOR utility and reboot the system.

3. When prompted press F12 to reboot from the CD.

4. Select Recover your software (Windows 2000) and follow the screen instructions to install Windows

2000.

Note: A message will appear that the drive needs to be repartitioned. The operating system will automatically

do this process as part of the recovery and installation.

Installing the Storage Manager application

1. Insert the Adaptec RAID 2100s CD in the drive.

2. Open the directory Str_manager double-click the Setup.exe icon and follow the instructions.

For more information on using Storage Manager, please refer to the Storage Manager Software Guide located on

the CD.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Adaptec Matériel informatique

Adaptec

Adaptec SATA RAID FOR ADAPTEC Manuel utilisateur

Adaptec

Adaptec 2045 Manuel utilisateur

Adaptec

Adaptec ASR-6805Q Manuel utilisateur

Adaptec

Adaptec 2100S - SCSI RAID Controller Manuel utilisateur

Adaptec

Adaptec 2025ZCR - SCSI RAID Storage Controller Manuel utilisateur

Adaptec

Adaptec RAID 2405 Manuel utilisateur

Adaptec

Adaptec ACB-2370 Manuel utilisateur

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... Manuel utilisateur

Adaptec

Adaptec DuraStor 7200S Manuel utilisateur

Adaptec

Adaptec RAID 6805Q Manuel utilisateur

Adaptec

Adaptec 7210S Manuel d'utilisation et d'entretien

Adaptec

Adaptec ASR-2130SLP Comment utiliser

Adaptec

Adaptec RAID 5405 Manuel utilisateur

Adaptec

Adaptec AHA-1520 Manuel utilisateur

Adaptec

Adaptec RAID 2405Q Manuel utilisateur

Adaptec

Adaptec 2045 Manuel utilisateur

Adaptec

Adaptec ASR-3085 Manuel d'utilisation

Adaptec

Adaptec RAID 5405Z Manuel utilisateur

Adaptec

Adaptec AFM-600 Manuel utilisateur

Adaptec

Adaptec ARO-1130SA Instructions de montage

Adaptec

Adaptec GDT8114RZ Manuel utilisateur

Adaptec

Adaptec PowerDomain 2940UW Manuel utilisateur

Adaptec

Adaptec RAID 3085 Manuel utilisateur

Adaptec

Adaptec 2940U2W - Storage Controller U2W SCSI 80... Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur