Adaptec 2100S - SCSI RAID Controller Manuel utilisateur
SCSI RAID Family
Quick Start Guide
1
In This Booklet
➤Read This First 2
➤Using the Adaptec CD 3
➤Adaptec Product Documentation 7
➤Installing Adobe Acrobat Reader 8
➤Installing and Configuring Hardware 9
➤LED Indicators 18
➤Installing I2O Drivers 20
➤Installing Adaptec Storage Management Software 32
➤Using Storage Manager on ROM (SMOR) 36
2
Read This First
Before you start to install your new Adaptec controller, please take time
to read this booklet. It contains an overview of the installation process
and the other important information. If you have experience installing
RAID subsystems, reading this can save you time and make the
installation easier.
If you need more detailed information, the complete product manuals
are on the Adaptec CD-ROM. The table on page 8 is a guide to help you
match what you want to know with the product manual that has the
information you need.
Errata & Release Notes
Before beginning your installation, review the errata and release
notes associated with Adaptec SCSI RAID controllers, software and
documentation. To read this information, select Release Notes from
the View Documentation list or open the read.me file in the root
directory of the CD with a text editor.
3
This booklet describes:
■How to view the documentation on CD-ROM
■Installing and configuring your hardware
■Installing Adaptec software
■How to access Storage Manager on ROM (SMOR)
■Contacting Adaptec Technical Support
Using the Adaptec CD
The Adaptec SCSI RAID CD is a bootable media. You can use this CD
to configure disk arrays in a host system that does not yet have an
operating system installed. The CD-ROM drive must be attached to a
controller and host system that recognizes bootable CDs. Some systems
might require you to change the system BIOS configuration so that the
CD-ROM drive is used as a boot device.
When the CD is used as a boot source, an operating system is loaded
and then the Adaptec SCSI RAID installation utility starts. You will be
able to read the product documentation, install I2O drivers, run Storage
Manager, and create disks to use for driver installation when the
operating system being installed cannot use the CD-ROM as a source
for the files.
4
When the Adaptec SCSI RAID Family install utility appears, you have
the following choices:
■Create driver disks
This selection will display a dialog that lists the operating
systems for which disks can be created. This lets you create
disks for operating system driver installation procedures that
cannot read directly from the CD-ROM.
■Launch RAID configuration utility
This selection starts the Storage Manager application so that
you can configure your RAID subsystem and build disk
arrays.
■View documentation
This selection displays a list of the available product manuals
and the read.me file with the latest release notes. Select a
document name and click on OK to view the information.
■Start a command shell
This selection starts a Linux command shell. This lets you
mount additional device or enter other system commands
that might be required during the installation.
5
■Reboot
This selection will restart the computer system. As soon as the
system begins to restart, remove the CD from the CD-ROM
drive if you do not want to use it for the boot device.
If you are using a Microsoft Windows operating system, put the CD
into your CD-ROM drive. If you have Autorun turned on, the Adaptec
setup utility will automatically start and display the Adaptec
installation menu with four options:
■Install Adaptec Storage Manager Pro
Installs the Storage Manager Pro software and Java
environment for Microsoft Windows. You must install Storage
Manager using the Typical option to enable configuration
management.
■Install Adaptec Storage Manager
Installs the Storage Manager software, I2O driver for
Microsoft Windows.
■View Latest Information
Displays the Release Notes which contain the latest information
for Adaptec SCSI RAID products and software.
6
■Create Floppy Disks
Lets you create disks for driver installation on systems that
require them to install the software or drivers.
■Install Adobe Acrobat Reader
Installs Adobe Acrobat Reader for Windows to let you view
the Adaptec documentation in PDF format. Versions of
Acrobat Reader for other platforms are also included, see
Installing Adobe Acrobat Reader on page 8.
If the Autorun menu does not appear automatically:
1Click the Start button.
2Select Run.
3Typ e d:\autorun.exe
where d: is the drive letter assigned to your CD-ROM drive.
4Click OK to run the program.
Follow the prompts to complete the installation.
7
Adaptec Product Documentation
Detailed product documentation is supplied in Adobe Acrobat PDF
format. A list of supplied documents is given in the table on page 8.
Both Adobe Acrobat Reader and Adobe Acrobat Viewer are provided
on the Adaptec CD-ROM. If you need to know specific information
about your controller or the software, you need to use one of these PDF
reader programs. You can also use a different computer with Acrobat
Reader already installed.
Adobe Acrobat Viewer can be used on any host system that has a Java
Virtual Machine (JVM) installed. You must have Java Runtime
Environment 1.1.8 installed to use Acrobat Viewer.
The installation utility lets you choose whether or not you want to
install Adobe Acrobat Reader.
When you find the manual you need, open the document by double
clicking the file name or icon. You can use the Table of Contents or the
bookmark list to navigate the document.
You can also visit our web site at http://www.adaptec.com and
download the product manuals. The manuals available on the Adaptec
web site may be more recent versions than those on the CD.
8
Installing Adobe Acrobat Reader
The following sections describe where to find the Acrobat Reader
which you need to view the product documentation on the CD.
Acrobat Reader is available from Adobe Systems as a free download.
Go to http://www.adobe.com for more information.
Windows 95/98, Windows NT, Windows 2000
Acrobat Reader for Windows installs automatically within the Adaptec
installation utility. If you select the Customoption during the install,
you can choose whether or not to install Acrobat Reader on your
system.
Linux
Acrobat Reader for Linux is located on the CD in the
\packages\linux\redhat_6.2_or_6\apps\adobe\ subdirectory.
Subject Location on CD
Storage Management Software User’s Guide \docs\do1011_1.pdf
Storage Manager Pro User’s Guide \docs\do1012_1.pdf
2100S SCSI RAID Installation Guide
3000S Series SCSI RAID Installation Guide
\docs\do1013_1.pdf
\docs\do1014_1.pdf
9
Novell NetWare
Adobe Acrobat Reader and Viewer are not available for this operating
system or a DOS environment. You will need to use a host system
where Acrobat Reader or Acrobat Viewer is supported.
UNIX
Adobe Acrobat Viewer is included on the Adaptec CD to let you view
Portable Document Format (PDF) files on a UNIX platform that has
JavaRuntime Environment 1.1.8 installed. This version is for UNIX
operating systems where Acrobat Reader is not available. This package
is located in the \acrobat_java subdirectory on the CD.
Installing and Configuring Hardware
Installation Overview
The process of installing an Adaptec controller consists of the following
steps:
1If you are using a RAIDstation enclosure, configure it as described
in the Adaptec RAIDstation User’s Manual.
2Configure device IDs, cables and termination for SCSI devices in
the host system.
3If you are expanding your cache memory, plug the appropriate
modules into the controller.
Autres manuels pour 2100S - SCSI RAID Controller
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Adaptec Matériel informatique
Adaptec
Adaptec M3093GX Manuel d'utilisation et d'entretien
Adaptec
Adaptec RAID 51245 Comment utiliser
Adaptec
Adaptec ACB-2370 Manuel utilisateur
Adaptec
Adaptec PowerDomain 29160 Manuel utilisateur
Adaptec
Adaptec 7210S Manuel d'utilisation et d'entretien
Adaptec
Adaptec ARO-1130SA Instructions de montage
Adaptec
Adaptec RAID 2405 Manuel utilisateur
Adaptec
Adaptec 2100S - SCSI RAID Controller Manuel utilisateur
Adaptec
Adaptec 2045 Manuel utilisateur
Adaptec
Adaptec AUA-3100LP Manuel
Adaptec
Adaptec ICP 5045BL Manuel utilisateur
Adaptec
Adaptec AAR-1420SA Mode d’emploi
Adaptec
Adaptec 2010S - SCSI RAID Storage Controller Guide de sécurité
Adaptec
Adaptec DuraStor 6200S Manuel utilisateur
Adaptec
Adaptec AFM-600 Manuel utilisateur
Adaptec
Adaptec Serial Attached SCSI (SAS) Expander Card Manuel utilisateur
Adaptec
Adaptec PowerDomain 2940UW Manuel utilisateur
Adaptec
Adaptec 4000SAS Manuel utilisateur
Adaptec
Adaptec 2940U2W - Storage Controller U2W SCSI 80... Manuel utilisateur
Adaptec
Adaptec AAR-1220SA Mode d’emploi
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
