ActionTec USB Wireless Bluetooth Adapter Manuel utilisateur

Solutions for the Digital Life™

User Manual

USB

Wireless

BluetoothAdapter

Softwareversion: 1.1

1. Introduction 1

What is Bluetooth? 1

Package Contents 1

Minimum System Requirements 2

Technical Support 2

2. Installing the USB Wireless Bluetooth Adapter 3

2.1Install the Software 3

2.2Connect the Adapter 7

3. Working with Bluetooth 10

3.1 Start or Stop using the Adapter 10

3.2 Creating a Bluetooth Connection 10

3.3 Connect to Another Device 11

3.4 Connect to a Bluetooth Headset 16

4. Working with Bluetooth Software 18

4.1The Bluetooth Tray 18

4.2 Access My Bluetooth Places 19

4.3 Finding Bluetooth Devices 19

4.4 Finding Bluetooth Services 20

4.5 Bluetooth Connection Status 22

4.6 Bluetooth Devices and Services 23

4.7 Send to Bluetooth 25

5. Configuring for Other Services / Applications 27

5.1Opening Bluetooth Configuration 27

5.2 Bluetooth Services vs. Applications 27

5.3 The Bluetooth Exchange Folder 28

5.4 Configuration Settings 28

5.5 Bluetooth Applications 29

5.6 Bluetooth Services 41

Table of Contents Page

Actiontec USB Wireless Bluetooth Adapter

5.7 Hardware Settings 51

5.8 Accessibility Settings 53

5.9 Discovery Settings 54

6. Security 56

7. Troubleshooting 59

8. Frequently Asked Questions 63

Notices 65

Regulatory Compliance Notices 65

Warranty statements 67

Proprietary Notice and Disclaimer

Unless otherwise noted, this document and the information herein disclosed are propri-

etary to Actiontec Electronics, Inc the manufacturer. Any person or entity to whom this

document is furnished or who otherwise has possession thereof, by acceptance agrees that

it will not be copied or reproduced in whole or in part, nor used in any manner except to

meet the purposes for which it was delivered.

The information in this document is subject to change without notice and should not

be construed as a commitment by Actiontec the manufacturer. Although Actiontec the

manufacturer will make every effort to inform users of substantive errors, Actiontec the

manufacturer disclaims all liability for any loss or damage resulting from the use of this

document or any hardware or software described herein, including without limitation

contingent, special or incidental liability.

Note: PC is a trademark of IBM Corporation. Windows 98 , Windows 98 SE, Windows NT,

and Windows XP is a trademark of Microsoft Inc. All other brand or product names and logos

used in this manual are trademarks or registered trademarks of their respective holders.

Introduction

Thank you for purchasing the Actiontec USB Wireless Bluetooth Adapter.

Now you can truly enjoy the freedom of wireless connectivity with Actiontec's

Bluetooth Adapter. Simply install the software and then plug this tiny adapter into

any USB port on your computer, and you can exchange information between it

and any other Bluetooth enabled device. Imagine sharing your Internet connec-

tion by simply requesting it from any computer, or PDA. Connect on the go by

using your cell phone as a high speed modem or simply print to any bluetooth

enabled printer, The Actiontec USB Wireless Bluetooth Adapter lets you enjoy the

freedom of true mobility whether you're at the office or on the move.

What is Bluetooth?

Bluetooth is a worldwide standard for digital wireless communication and data

exchange between multiple devices. Bluetooth compliant devices exchange data

by establishing a relationship with each other, the first device acting as a client,

requests a connection, while the second device acting as a server accepts or rejects

that request. Some Bluetooth devices can behave as client and server; however

other devices can only behave as a client.

Package Contents

Actiontec USB Wireless Bluetooth Adapter

Installation CD

Quick start guide

USB Extension Cable (Optional)

Actiontec USB Wireless Bluetooth Adapter

Minimum System Requirements

Microsoft Windows 98SE, ME, 2000, XP

Available USB Port

Pentium 90 or faster

16MB or RAM

TCP/IP installed

Technical Support

Actiontec Electronics prides itself on making high-quality, durable,

high-performance products. If you need assistance, the Actiontec Technical

Support Department is available every day 24 hours a day to provide professional

support.

Actiontec Electronics, Inc.

760 N. Mary Avenue

Sunnyvale, CA 94085

Technical Support

Phone: (888) 436-0657

E-mail: techsupp@actiontec.com

Internet: www.actiontec.com/support

Installing the USB Wireless

Bluetooth Adapter

The instructions that follow provide a visual guide to setting up the Actiontec

USB Wireless Bluetooth Adapter. It is recommended the user follow these

instructions prior to attempting any other procedures. This manual will guide

you through the hardware and software installation and configuration.

2.1 Install the Software

"STOP!!!: You must install the Bluetooth Software PRIOR to connecting

your Bluetooth Adapter to the computer. If you have already

connected the Bluetooth Adapter, please remove it now and restart

your computer.

1. Make sure your computer is turned on, then put the Actiontec Installation

CD-ROM in your CD-ROM drive.

2. The Installation software should start automatically. This may take a few

moments.

When you see this window. Click Next to continue

"Note: If you do not see the window above, click Start on the taskbar

and then select Run. Type d:/setup (or e:/setup, depending on the

drive letter of your CD-ROM drive), then click OK.

Actiontec USB Wireless Bluetooth Adapter

3. When you see the License Agreement screen appear, read the License

Agreement carefully. Click the circle next to “I accept the terms in the license

agreement” and then click Next to continue.

"Note: If you do not agree with the terms of the license agreement,

click the circle next to “I do not accept the terms in the license

agreement” and click Next. Now you have terminated the installation

of this Bluetooth Adapter.

4. Click Next to continue.

5. Click Install to continue.

Chapter 2 Installing the USB Wireless Bluetooth Adapter

6. You will see this window. Please be patient as it will take several minutes to

install your Bluetooth software.

You may need to have your Windows CD handy.

7. You may see this screen. If you do, click OK.

8. Click Finish to complete the software installation. Please remove any CD

from the CD-ROM drive before restarting your computer.

Actiontec USB Wireless Bluetooth Adapter

9. Click Ye s to complete the software installation and restart your computer

now.

"Note: If you are running Windows XP, you may not need to

restart your computer.

Chapter 2 Installing the USB Wireless Bluetooth Adapter

2.2 Connect the Adapter

1. Get the Bluetooth Adapter from the Actiontec Quick Start Kit

2. Take the cap off of the Bluetooth Adapter.

3. Follow the instructions for the type of computer that you are using.

Windows XP Users! You may see a Found New Hardware Wizard screen, once

you connect the Bluetooth Adapter to your computer. Please see below for

detailed instructions.

a. The “Found New Hardware Wizard” will run and the following screen will

appear, make sure “Install the software automatically (Recommended)” is

selected. When ready click Next to continue.

b. The following screen appears, Click on Finish to complete the installation

process.

Table des matières

Autres manuels ActionTec Adaptateur

ActionTec

ActionTec 802UIG-1 Manuel utilisateur

ActionTec

ActionTec 802UIG Manuel utilisateur

ActionTec

ActionTec HWE05490-01 Manuel utilisateur

ActionTec

ActionTec 802EAG Manuel utilisateur

ActionTec

ActionTec MegaPlug AV Manuel utilisateur

ActionTec

ActionTec HWU05470 Manuel utilisateur

ActionTec

ActionTec MegaPlug AV HPE200AV Manuel utilisateur

ActionTec

ActionTec ECB6000 Manuel utilisateur

ActionTec

ActionTec ECB6200 Manuel utilisateur

ActionTec

ActionTec ECB6250S02 Manuel utilisateur

ActionTec

ActionTec 802URM Manuel utilisateur

ActionTec

ActionTec USB Bluetooth Manuel utilisateur

ActionTec

ActionTec MegaPlug HPE100T Manuel utilisateur

ActionTec

ActionTec ECB5240M Manuel utilisateur

ActionTec

ActionTec 802AIN Manuel utilisateur

ActionTec

ActionTec ECB2200 Manuel utilisateur

ActionTec

ActionTec MegaPlug HPE 200AVP Manuel utilisateur

ActionTec

ActionTec HCB1000 Manuel utilisateur

ActionTec

ActionTec ECB6250 KIT Manuel utilisateur

ActionTec

ActionTec 802CAG Manuel utilisateur

ActionTec

ActionTec 802URG Manuel utilisateur

ActionTec

ActionTec Wireless USB Driver 802UAT1 Manuel utilisateur

ActionTec

ActionTec 14 Mbps HomePlug Ethernet Adapter Manuel utilisateur

ActionTec

ActionTec 802CI2 Guide de configuration

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur