ACTi PMON-1001 Manuel utilisateur
Camera Installation Kit PMON-1001
Quick Installation Guide
~ 1~
I. Package contents
．Camera Installation Kit PMON-1001 ．Belt Bag
．Rechargeable Battery ．Charger
．Quick Installation Guide ．Antenna
II. Additionally required equipment
．Apple iPhone or iPod Touch with iOS5 or newer ．Ethernet cable (1.5 m / 5 ft)
III. Concept of usage
Camera Installation Kit PMON-1001 is a light on-the-belt
hardware utility that connects to the IP camera and
provides PoE power through a short network cable while
providing wireless network access for iPhone or iPod Touch
that has a free downloaded app "CameraGo!" installed.
With the help of this installation kit it is possible to do convenient and time-saving viewing
angle and focus adjustment of ACTi cameras without needing to bring a notebook computer
up on the ladder with the long cable attached or ask someone on the ground for assistance.
IV. Preparing the Camera Installation Kit
1. Screw in the antenna and lock it by [Lock] button.
2. Insert fully charged battery into the kit.
3. Put the kit into the belt bag.
4. Turn on the power (PWR and RDY LEDs will turn on).
~ 2~
V. Preparing the application software for Apple device
Download CameraGo! free app from Apple’s App Store and install to the Apple device.
VI. Using the whole solution
VII.Warranty
PMON-1001 and Charger –1 year
Battery –6 months
More info: http://www.acti.com/support/warranty/
VIII. Additional information
Manuals: www.acti.com/product/
Knowledge Base Articles: www.acti.com/kb/
Online Customer Help Desk: www.acti.com/chd/
1. Connect PMON-1001 to the IP camera by Ethernet cable. ENET LED will
turn on and blink during data transmission. When the camera boot up is
complete, PMON-1001 will activate Wi-Fi network named “Camera_Helper”
and the Wi-Fi indication LEDs of PMON-1001 will start to flash forth and back.
Then use Apple device to connect to that wireless
network (password: 12345678).
2. Launch CameraGo! app.
3. CameraGo! will detect the IP camera.
Press [OK] to connect to live view.
4. Use live view to adjust the viewing angle
and focus of the IP camera. When
installing a zoom camera with auto focus,
you can also use [+] and [-] zoom buttons
and [Re-Focus] button if necessary.
5. When the camera adjustment is done, unplug the network cable from
camera and plug in to the next camera. Updated “Camera_Helper”network
will pop-up that matches with the network segment of the next camera.
Select it and repeat from step 3.
Table des matières
Autres manuels ACTi Caméra de sécurité
ACTi
ACTi A425 Manuel utilisateur
ACTi
ACTi TCM-5311 Guide de démarrage rapide
ACTi
ACTi A713 Manuel utilisateur
ACTi
ACTi E99M Manuel utilisateur
ACTi
ACTi I91 Manuel utilisateur
ACTi
ACTi ACM-3601 Manuel utilisateur
ACTi
ACTi B412 Manuel utilisateur
ACTi
ACTi E54 Instructions d'utilisation
ACTi
ACTi E89 Manuel utilisateur
ACTi
ACTi E83 Manuel utilisateur
ACTi
ACTi A416 Manuel utilisateur
ACTi
ACTi E933M Manuel utilisateur
ACTi
ACTi D92 Manuel utilisateur
ACTi
ACTi A313 Manuel utilisateur
ACTi
ACTi E31 Manuel utilisateur
ACTi
ACTi D61 Manuel utilisateur
ACTi
ACTi TCM-3511 Instructions d'utilisation
ACTi
ACTi CAM-7100 Manuel utilisateur
ACTi
ACTi E12A Manuel utilisateur
ACTi
ACTi ACM-1232 Instructions d'utilisation
