ACTi B419-P2 Manuel utilisateur

Zoom Bullet Camera

Hardware Manual

B419-P2

2021/01/26

www.acti.com

Hardware Manual

Table of Contents

Precautions 3

Safety Instructions ...........................................................................5

Introduction 6

Package Contents.............................................................................6

Physical Description ........................................................................7

Installation Procedures 8

Step 1: Install the Camera................................................................8

Step 2: Waterproof the Ethernet Cable .........................................10

Using the Cable Gland.................................................................10

Step 3: Connect to Network...........................................................13

Step 4: Access the Camera Live View...........................................13

Other Connections 14

Connecting a Power Adapter (Optional).......................................14

Connecting Digital Input / Output Devices (Optional) .................15

Connecting Audio Devices (Optional)...........................................17

Other Accessories 18

How to Install / Remove the Memory Card ...................................18

Accessing the Camera 19

Configure the IP Addresses...........................................................19

Using DHCP Server to Assign IPAddresses................................19

Using the Default Camera IPAddress..........................................21

Access the Camera.........................................................................23

www.acti.com

Hardware Manual

Precautions

Read these instructions

Read all the safety and operating instructions before using this product.

Heed all warnings

Adhere to all the warnings on the product and in the instruction manual. Failure to follow the

safety instructions given may directly endanger people, cause damage to the system or to

other equipment.

Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Trademarks

ACTi and ACTi logo are registered trademarks of ACTi Corporation. All other names and

products used in this manual are registered trademarks of their respective companies.

Liability

Every reasonable care has been taken during the writing of this manual. Please inform your

local office if you find any inaccuracies or omissions. ACTi will not be held responsible for any

typographical or technical errors and reserves the right to make changes to the product and

manuals without prior notice.

www.acti.com

Hardware Manual

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to the equipment that are not expressly approved by the

responsible party for compliance could void the user’s authority to operate the equipment.

European Community Compliance Statement

This product has been tested and found to comply with the limits for Class B

Information Technology Equipment according to European Standard EN 55022

and EN 55024. In a domestic environment, this product may cause radio interference in which

cause the user may be required to take adequate measures.

www.acti.com

Hardware Manual

Safety Instructions

Cleaning

Disconnect this product from the power supply before cleaning.

Accessories and Repair Parts

Use only the accessories and repair parts recommended by the manufacturer. Using other

attachments not recommended by the manufacturer may cause hazards.

Water and Moisture

Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a

dry place protected from weather.

Servicing

Do not attempt to service this product yourself. Refer all servicing to qualified service

personnel.

Damage Requiring service

Disconnect this product from the power supply immediately and refer servicing to qualified

service personnel under the following conditions.

1) When the power-supply cord or plug is damaged

2) If liquid has been spilled, or objects have fallen into the product.

3) If the inner parts of product have been directly exposed to rain or water.

4) If the product does not operate normally even by following the operating instructions in this

manual. Adjust only those controls that are covered by the instruction manual, as improper

adjustment of other controls may result in damage, and will often require extensive work

by a qualified technician to restore the product to its normal operation.

Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine if the product is in proper operating condition.

www.acti.com

Hardware Manual

Introduction

Package Contents

Camera

Mounting Screw Kit

Cable Gland with Washer

Wrench

Drill Template

Quick Guide &

Warranty Card

Drill Template

Warranty Card

www.acti.com

Hardware Manual

Physical Description

Item

Description

Ethernet Port

Connects to a network using a standard Ethernet cable.

Digital Input/ Output

Connects to digital input and output device, such as an alarm

trigger, panic button, LED light, etc.

Audio Input / Output

Connects to an audio input and output device, such as a

microphone and speaker.

DC 12V Power

Connects to an external DC 12V power adapter.

Reset Button

Press and hold the reset button to restore the camera factory

default settings.

Analog Video Output

Connects to a video output device, such as a camera installation

kit or monitor for testing. Use the bundled video output connector

to connect to an external monitor. This connection is used for

installation only.

Memory Card Slot

Insert a memory card into the slot for local recording.

www.acti.com

Hardware Manual

Installation Procedures

Step 1: Install the Camera

1. Mark the screw holes or attach the bundled drill template on the target surface.

NOTE: Depending on the surface where you will install the camera, it may be necessary to

drill four (4) holes and use the supplied screw tox.

2. If the cable will pass through the surface, drill the cable hole as indicated on the drill

template. If the cable will be routed along the surface, route the cable through the gap

on the bracket. For outdoor installations, you may need to purchase the optional junction

box to protect the cables, contact ACTi Sales for details.

3. Mount the camera to the surface using four (4) screws.

4. Loosen the screw to tilt, pan, or adjust the camera orientation.

www.acti.com

Hardware Manual

5. Adjust the camera angle and orientation.

Sample of Wall Installation Sample of Ceiling Installation

6. Tighten the screw to fix the tilt angle position.

www.acti.com

Hardware Manual

Step 2: Waterproof the Ethernet Cable

If the camera will be installed outdoors, ensure that the cable connections and the network

side cable itself are protected from water and other environmental factors.

Use the bundled cable gland for the Ethernet connector and use waterproof tape to protect the

other cable connection. An optional Junction Box is available for purchase, contactACTi sales

for details.

Using the Cable Gland

This section describes how to waterproof the cable-out or “pigtail” of the camera using the

bundled cable gland.

Perform the following to waterproof the “pigtail” using the cable gland:

1. Attach the washer to the Ethernet connector of the camera.

2. Detach the clamping nut and sealing insert from the gland body:

Gland Body

Clamping Nut

Sealing Insert

Table des matières

Autres manuels ACTi Caméra de sécurité

ACTi

ACTi ACM-3011 Instructions d'utilisation

ACTi

ACTi E43 Manuel utilisateur

ACTi

ACTi TCM-1231 Series Instructions d'utilisation

ACTi

ACTi E924 Manuel utilisateur

ACTi

ACTi E98 Manuel utilisateur

ACTi

ACTi I93 Manuel utilisateur

ACTi

ACTi E31 Manuel utilisateur

ACTi

ACTi A956 Manuel utilisateur

ACTi

ACTi CAM-7200 series Instructions d'utilisation

ACTi

ACTi Outdoor Zoom Dome Series Manuel utilisateur

ACTi

ACTi ACM-1100 Series Manuel utilisateur

ACTi

ACTi A811 Manuel utilisateur

ACTi

ACTi D31 Manuel utilisateur

ACTi

ACTi E31 Manuel utilisateur

ACTi

ACTi A313 Manuel utilisateur

ACTi

ACTi B57A Manuel utilisateur

ACTi

ACTi TCM-1231 Series Instructions d'utilisation

ACTi

ACTi Z710 Manuel utilisateur

ACTi

ACTi CAM-6510 Manuel utilisateur

ACTi

ACTi CAM-6200 Manuel utilisateur

ACTi

ACTi VER. 061030 CAM-6500 Manuel utilisateur

ACTi

ACTi E38 Manuel utilisateur

ACTi

ACTi E79 Manuel utilisateur

ACTi

ACTi KCM-7311 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur