Acnodes PANEL PC 1000 Manuel utilisateur

PANEL PC 1000

All-in-One 10.4”

Super Slim PANEL PC

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. ACNODES assumes no responsibility for any infringements of patents or

other rights of third parties, which may result from its use.

ACNODES assumes no responsibility for any inaccuracies that may be contained in

this document. ACNODES makes no commitment to update or to keep current the

information contained in this manual.

ACNODES reserves the right to make improvements to this document and/or product

at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of ACNODES.





May 2002, Version A1

iii

Safety Approvals

!" CEMarking

!" FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL PC 1000 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the PANEL PC 1000

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PANEL PC 1000 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL PC 1000 may come

with or w/o a touch screen. Although the touch screen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touch screen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touch screen.

Scratches on the touch screen may cause malfunction

or internal failure to the touch screen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PANEL PC 1000, make

sure it is securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

ACNODES is a trademark of ACNODES Inc.

ALI is a trademark of Acer Laboratories, Inc.

AMD is a trademark of Advanced Micro Devices, Inc.

AMI is a trademark of American Mega trends, Inc.

Cyrix is a trademark of Cyrix Corporation.

ELO is a trademark of ELO Touch Systems, Inc.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of

Microsoft Corporation.

SMC is a trademark of Standard Microsystems

Corporation.

C&T is a trademark of Chips and Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

This page does not contain any information.

This page does not contain any information.This page does not contain any information.

This page does not contain any information.

Table of Contents vii

Table of Contents

Chapter 1 Introduction ------------------------------- 1

1.1 General Description......................................... 1

1.2 Specifications.................................................. 2

1.3 Dimensions...................................................... 4

1.4 I/O Outlets........................................................ 5

1.5 Utilities Supported........................................... 6

Chapter 2 System Configuration------------------ 7

2.1 System Configuration...................................... 7

2.1.1 Front View ............................................................... 7

2.2 Panel Mount..................................................... 8

Chapter 3 System Installation --------------------- 9

3.1 CPU.................................................................10

3.2 DRAM..............................................................10

3.3 HDD.................................................................11

3.4 4 x Serial Ports ...............................................12

3.5 Parallel Port....................................................13

3.6 VGA.................................................................13

3.7 Ethernet ..........................................................13

3.8 Digital I/Os......................................................14

3.9 Keyboard ........................................................14

3.10 PS/2 Mouse.....................................................14

3.11 External FDD...................................................15

3.12 Expansion Slot................................................16

3.13 System O/S and Software Installation.............17

Appendix A Power Supply Specifications---- 19

Standard AC Power Supplies ...................................19

Optional DC Power Supplies....................................21

This page does not contain any information.

This page does not contain any information.This page does not contain any information.

This page does not contain any information.

PANEL PC 1000 All-in-One PANEL PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detailed

specifications of the PANEL PC1000. Chapter 1 includes the following

sections:

$"General Description

$"System Specification

$"Dimensions

$"I/O Outlets

$"Utilities Supported

1.1 General Description

The PANEL PC 1000 super slim industrial PANEL PCs are mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is simply not integrated enough.

Ruggedly designed, the PANEL PC 1000 is 100% IBM PC/AT

compatible and it integrates super I/Os, VGA, 10.4” TFT, touch screen,

Ethernet, and packs special industrial features like watchdog timer,

CMOS double backup, all in a single system. The full PC

functionality coupled with its industrial-grade construction easily tailors

the system for any embedded applications and allows the system to

endure continuous operation in any hostile industrial environments

where stability and reliability are a must. Common applications of the

PANEL PC 1000 include tooling machine, POI terminal, stand-alone

KIOSK, medical instrument, mobile communication device and

banking system - to name just a few.

1000 is virtually the ultimate one-step solution for your space-limited

applications.

PANEL1000-370 All-in-One PANEL PC User’s Manual

Introduction

1.2 Specifications

Core System for system board

CPU: Intel Celeron 300 up to 733 MHz;

Intel Pentium III 500 up to1.0Ghz

System Chipset: Intel 440BX Core Logic Controller

BIOS: Award BIOS, Y2K compliant

2Mbit Flash ROM, DMI, Plug and Play

System Memory: One 168-pin DIMM (PC-100)

Maximum SDRAM of up to 256MB

L2 Cache: Integrated in CPU

Real Time Clock: Dallas STM48T86PC1 or latest product

Watchdog Timer: System reset or Non-Mask Interrupt

software programmable Time interval and

jumper selectable;

64 levels, 0.5~8 / 5~80 / 50~800 / 100~1600

seconds

I/O System

Standard I/O:

− 4 x serial ports with power; 3 x RS-232, 1 x

RS-232/422/485 jumper selectable

− 1 x parallel port, SPP/EPP/ECP

− 1 x External FDD Interface

− 2 x HDD Interface

− 1 x Keyboard Interface

− 1 x PS/2 Mouse Interface

− 2 x USB Ports

Digital I/O: Input x 4, Output x 4

Ethernet:

− 32-bit Plug & Play Fast Ethernet Controller

− RJ-45 connector

Audio:

− ESS Solo-1 1938 32-bit PCI 2.1 Audio Drive controller

VGA/Flat Panel Controller:

− AGP Interface C&T69000 controller with integrated 2MB

SDRAM

− Simultaneously supports CRT and flat panel displays

Autres manuels pour PANEL PC 1000

Table des matières

Autres manuels Acnodes Écran tactile

Acnodes

Acnodes PC 8172 Manuel utilisateur

Acnodes

Acnodes FPC 8077 Manuel utilisateur

Acnodes

Acnodes PC 5171 Manuel utilisateur

Acnodes

Acnodes PC 2150 Manuel utilisateur

Acnodes

Acnodes PCA80 Series Manuel utilisateur

Acnodes

Acnodes PC 8150 Manuel utilisateur

Acnodes

Acnodes FPC 8059 Manuel utilisateur

Acnodes

Acnodes PC 6170 Manuel utilisateur

Acnodes

Acnodes PCH 5120 Manuel utilisateur

Acnodes

Acnodes PC 2120 Manuel utilisateur

Acnodes

Acnodes PC 3500 Manuel utilisateur

Acnodes

Acnodes PC 8120 Manuel utilisateur

Acnodes

Acnodes PCM8010 Manuel utilisateur

Acnodes

Acnodes PC 8172 Manuel utilisateur

Acnodes

Acnodes FPC 6104 Manuel utilisateur

Acnodes

Acnodes FPC 8089 Manuel utilisateur

Acnodes

Acnodes PC 1060 Manuel utilisateur

Acnodes

Acnodes PC 1060 Manuel utilisateur

Acnodes

Acnodes PC 8717 Manuel utilisateur

Acnodes

Acnodes FPC 8104 Manuel utilisateur

Acnodes

Acnodes PC 6150 Manuel utilisateur

Acnodes

Acnodes PC 5152 Manuel utilisateur

Acnodes

Acnodes FPC 7161 Manuel utilisateur

Acnodes

Acnodes PC 5151 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur