Acnodes PC 2150 Manuel utilisateur

Table of Contents i

PC 2150

All-in-One

15.0” Super Slim

PANEL PC

User’s Manual

Table of Contents

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate.ACNODES Co.,Ltd.assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

ACNODES assumes no responsibility for anyinaccuraciesthatmaybe contained in

this document. ACNODES makes no commitment to update orto keep current the

information contained in this manual.

ACNODES reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording,or otherwise, without theprior written permissionofACNODES Co.,

Ltd.

September 2004, Version A1

Printed in Taiwan

Table of Contents iii

Safety Approvals

CEMarking

FCCClassA

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.ou

Table of Contents

Safety Precautions

Before getting started, read the following important cautions.

1. The PC 2150 doesnot comeequippedwith an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnectthe power cord fromthe PC 2150

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PC 2150 isproperlygrounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directlyonto thescreen.The PC 2150 may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PC 2150,make

sure it is securely installed.

Table of Contents v

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

9Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity

on your body.

9When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

ACNODES is a trademarkof AXIOMTEKCo., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBASIC are trademarks of

Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

PC 2150 15.0”All-in-One PANEL PC User’sManual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detail

specificationsofthe PC2150.Chapter 1 includes the

following sections:

General Description

System Specification

Dimensions

I/O Outlets

Utilities Supported

1.1 General Description

The PC 2150 super slim industrial PANEL PC is mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is too complex for system integration.

Ruggedly designed Industrial Panel PC, the PC 2150,is an

all-in-one system which is 100% IBM PC/AT compatible. It includes

integrated 15.0” TFT LCD, touch screen, super I/Os, Ethernet, and

packs special industrial features like watchdog timer, CMOS double

backup. The industrial-graded PC 2150 can beeasily applied

to any embedded applications. It allows the system to continuously

operate in any hostile industrial environments where stability and

reliability is a must. Common applications of the PC 2150

include tooling machine, POI terminal, stand-alone KIOSK, medical

instrument, mobile communication device and banking system - to

name just a few.

Designed bythe Industrial PC experts, the PC 2150 is virtually

the ultimate one-step solution for your space-limited applications.

PC 2150 15.0”All-in-One PANEL PC User’sManual

Introduction

1.2 Specifications

1.2.1 Core System for PC 2150

SBC83675-based system

CPU: Intel Celeron 533MHz ~ 1.3G MHz;

Intel Pentium III 550 ~ 1.4G MHz

VIA Cyrix-III/C3 Family at 100/133MHz FSB

System Chipset: VIA VT8606(Twist-T) + VT82C686B

BIOS: Phoenix-Award BIOS, 4Mbit with RPL/PXE LAN boot

ROM, SmartView and customer BIOS backup.

System Memory: One 168-pin DIMM Socket

Maximum of 512MB SDRAM

ECC/parity

L2 Cache: Integrated in CPU

Bus Clock: 66/100/133 MHz

Watchdog Timer: Generates a system reset or NMI by

jumper selectable; software

programmable Time interval; 64 levels,

0.5~8 / 5~80 / 50~800 / 100~1600 seconds

1.2.2 I/O System

Standard I/O:

−4 x serial ports with power;

3 x RS-232, 1 x

RS-232/422/485 jumper

selectable

−1 x parallel port,

SPP/EPP/ECP

−1 x Keyboard Interface

−1 x PS/2 Mouse Interface

−2 x USB Ports 1.1

compliant

Digital I/O: Input x 4, Output x 4

Ethernet:

- Realtek RTL 8100C PCI Bus 10/100M Base-T

- Wake-On-LAN

- RJ-45 interface equipped

PC 2150 15.0”All-in-One PANEL PC User’sManual

Introduction 3

Audio:

- AC-97 Codec

- 32-bit Sound Blaster and sound Pro compatible

- 16-bit stereo ADC and DAC

- PC97/PC98 and WHQL specifications

- Full-duplex operation for simultaneous record and

playback

- Internal MIC-in, Line-in, Speaker/Line-out interface

reserved

VGA/Flat Panel Controller:

- VIA Twister chip with integrated S3 Pro Savage4

2D/3D/Video accelerator

- 8/16/32MB frame buffer sharing system memory

- Supports up to 1280 X 1024 256-color resolution on

noninterlaced CRT monitors, and 1024 x 768 16 bit-color

on LCD panel monitors

1.2.3 Built-in Peripherals

15.0” TFT LCD

15.0” anti-glare analog resistive touch screen with RS-

232 controller sharing COM3

Slim Floppy Drive

System cooling fan

100W AC power supply

PC 2150 15.0”All-in-One PANEL PC User’sManual

Introduction

1.2.4 System Specification

15.0” TFT with 1024 x 768 resolution

NEMA 4/12 sealed front panel

24X slim type CD-ROM drive (Optional)

Slim floppy disk drive

Heat dispensing design

Two free slots for PCI/ISA and ISA expansion, or two

free slots for PCI/ISA and PCI expansion

−This slot only comes standard with the riser card

assembly.

Net weight:

−7.7 Kgs (without the riser card assembly mounted)

−8.8 Kgs. (with the riser card assembly mounted)

Dimension (main body size):

−2150:

433 x 358 x 91.30 mm (without the riser card assembly

mounted)

433 x 358 x 145.5 mm (with the riser card assembly

mounted)

Operating Temperature Range: 0oC ~ 45oC

Relative Humidity: 5% ~ 95%; non-condensing

Autres manuels pour PC 2150

Table des matières

Autres manuels Acnodes Écran tactile

Acnodes

Acnodes PCM8210 Manuel utilisateur

Acnodes

Acnodes PC 2120 Manuel utilisateur

Acnodes

Acnodes PC 1080 Manuel utilisateur

Acnodes

Acnodes PC 6170 Manuel utilisateur

Acnodes

Acnodes FPC 8089 Manuel utilisateur

Acnodes

Acnodes PC 3500 Manuel utilisateur

Acnodes

Acnodes FPC 8120 Manuel utilisateur

Acnodes

Acnodes PC 8717 Manuel utilisateur

Acnodes

Acnodes AMT 6010 Manuel utilisateur

Acnodes

Acnodes FPC 875X Manuel utilisateur

Acnodes

Acnodes PC 8175 Manuel utilisateur

Acnodes

Acnodes FPC 8121 Manuel utilisateur

Acnodes

Acnodes PC 5171 Manuel utilisateur

Acnodes

Acnodes PC 6150 Manuel utilisateur

Acnodes

Acnodes PC 5171 Manuel utilisateur

Acnodes

Acnodes FPC 5084 Manuel utilisateur

Acnodes

Acnodes PANEL PC 1000 Manuel utilisateur

Acnodes

Acnodes FPC 8059 Manuel utilisateur

Acnodes

Acnodes FPC 8104 Manuel utilisateur

Acnodes

Acnodes PC 5170 Manuel utilisateur

Acnodes

Acnodes PC 8172 Manuel utilisateur

Acnodes

Acnodes 17" TFT Expandable Intel Core 2 Duo Industrial Panel PC with 2 PCI PC... Manuel utilisateur

Acnodes

Acnodes PC 2120 Manuel utilisateur

Acnodes

Acnodes FPC-8057 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur